There are 2 screws on each side and one on the back and the cover will come off. you should be able to realign it then.
>________________________________ > From: Japheth Lim <[email protected]> >To: Brewtus <[email protected]> >Sent: Tuesday, March 6, 2012 12:11 AM >Subject: Re: Brew Pressure > >Uploaded the photo on tumblr (http://s3.amazonaws.com/data.tumblr.com/ >tumblr_m0g6b0xIwb1qbsusgo1_1280.jpg? >AWSAccessKeyId=AKIAJ6IHWSU3BX3X7X3Q&Expires=1331096959&Signature=UDXYGaMLk2DOyqVVcm2klMOkQLs >%3D); can you get to it now? > >And how do I pull the cover? Do I do that by unscrewing the screws on >the front panel, or do I actually have to open the machine up? > >On Mar 5, 1:00 am, Ben McCafferty <[email protected]> wrote: >> Can't get to the photo, but yes, you should be able to adjust it behind the >> drip tray. They are frequently misaligned; you may have to pull the cover >> once to move it into place. >> b >> >> Sent from my 8-track deck >> >> On Mar 4, 2012, at 5:21, Japheth Lim <[email protected]> wrote: >> >> >> >> >> >> >> >> > Is the OPV supposed to be accessible from behind the drip tray >> > (without having to open it up)? Mine seem to be misaligned. here's a >> > photo of >> > ithttps://plus.google.com/u/0/photos/105771079439875401276/albums/57160... >> >> > On Mar 2, 11:03 am, Ben McCafferty <[email protected]> wrote: >> >> I'd set it to 9 with the blind PF, which give you around. 8.5 when >> >> extracting. >> >> 11 is too high. >> >> b >> >> >> Sent from my 8-track deck >> >> >> On Mar 1, 2012, at 18:03, Japheth Lim <[email protected]> wrote: >> >> >>> Hi all, I am a relatively new user of a Brewtus III-V, and I am >> >>> wondering if I should calibrate the brew pressure down from 11 bars to >> >>> 10. I remember reading that the OPV is supposed to regulate pressure >> >>> by bleeding off excess pressure, thereby maintaining brew pressure at >> >>> 9 bars. Is that right? >> >> >>> -- >> >>> You received this message because you are subscribed to the Google >> >>> Groups "Brewtus" group. >> >>> To post to this group, send email to [email protected]. >> >>> To unsubscribe from this group, send email to >> >>> [email protected]. >> >>> For more options, visit this group >> >>> athttp://groups.google.com/group/brewtus?hl=en. >> >> > -- >> > You received this message because you are subscribed to the Google Groups >> > "Brewtus" group. >> > To post to this group, send email to [email protected]. >> > To unsubscribe from this group, send email to >> > [email protected]. >> > For more options, visit this group >> > athttp://groups.google.com/group/brewtus?hl=en. > >-- >You received this message because you are subscribed to the Google Groups >"Brewtus" group. >To post to this group, send email to [email protected]. >To unsubscribe from this group, send email to >[email protected]. >For more options, visit this group at >http://groups.google.com/group/brewtus?hl=en. > > > > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
