I live in Colorado and new to the group. I have a PID'd Gaggia Classic that I've been using for a couple months and decided I wanted something more. The IV-R should be here Thursday and I'm real excited.
I've got the plumbing all ready to go with a 3/8" coming from the basement with a shutoff at the tap and near the machine. I've also got a pressure regulator near the machine. I've got a whole house softener and the water tastes great from the tap so I think I'm good there. I'm going to double check the hardness and PH just so I know. I have been using a carbon filter for the Gaggia. I'm reading through the forum but thought I'd post and see if anyone has suggestions for things I should pay attention to. Reading through the manual I see it might be wise to adjust the pressures on the machine once I dial in the pressure regulator since it was set for an incoming pressure of 40 psi.. Any suggestions on those settings? Thanks for any help! -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
