Last year the pump in my Brewtus 3 Vibe died and I had it replaced. I used ther local espresso machine repair/sales shop who are not an Expobar dealer but reputable. I suggested that the OPV should be replaced as well and they said not to worry about it as everything was fine. When I received the machine back I noticed the pressure gauge always read 10+bars. I tried to adjust it with the OPV and no matter what I did it had no effect on the pressure. I contacted the shop and they said that the gauge wasn't working anymore.......
So I've lived with it as is but can't help but think that this isn't true. I seem to have to grind much finer then before. So the question is do I replace the pressure gauge and if so with what and how involved is that going to be or do I try just replacing the OPV first? -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
