I haven't moved any wires, so we can rule that out.
When turned on, the steam boiler heats up as normal with the big red
light on. Steam pressure comes up, big red goes off.
The PID display says 15ºC and stays there give or take. The small red
light on the PID is on steady, as is the LED on the SSR.
The pump does come on when the lever is raised.
Thanks,
Bruce
On 3/22/15 4:20 PM, Todd Salzman wrote:
If we can we start from scratch I might be able to help after a couple
of e mails.
Put all the wires back to their original position.
What happens when you turn it on?(describe symptoms)
The information I will need is:
Does the steam boiler heat up?
Does the big red light on the right side of the machine go on?
What do the display on the PID say?
Is the small light on the PID flashing?
Does the pump run when you raise the brew lever?
Todd Salzman
Whole Latte Love
On Sun, Mar 22, 2015 at 6:40 PM, Bruce Keeler <[email protected]
<mailto:[email protected]>> wrote:
BII with rotary and PID conversions installed.
When the machine is warmed up and steam light is off, I see 110V
at BOTH terminals of the brew boiler element. This tells me that
the neutral connection to the element is bad, right? When the
steam boiler is getting power I see 110V and 0V at its terminals
as expected.
But the thing is, with the machine powered down I stripped a tiny
piece of insulation off the neutral wire of the incoming power
cord and measured the resistance from there to each of the two
element terminals. I got 0Ω and 14Ω as expected. This tells me
that the neutral connection to the element is fine.
I'm going crazy trying to figure this out. Any ideas?
Thanks,
Bruce
--
You received this message because you are subscribed to the Google
Groups "Brewtus" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to [email protected]
<mailto:brewtus%[email protected]>.
To post to this group, send email to [email protected]
<mailto:[email protected]>.
Visit this group at http://groups.google.com/group/brewtus.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google
Groups "Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
To post to this group, send email to [email protected]
<mailto:[email protected]>.
Visit this group at http://groups.google.com/group/brewtus.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups
"Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/brewtus.
For more options, visit https://groups.google.com/d/optout.
