We just put together a video on how to test the electrical components on a Brewtus. I was not able to cover everything but if you go through it you may find that see what you need.
https://www.youtube.com/watch?v=UIiLeRdVWAU Hope this helps. Todd Salzman Whole Latte Love On Thu, Apr 9, 2015 at 9:45 AM, Mark Fletcher <[email protected]> wrote: > You might try reading...I had the same problem with my Brewtus. Todd > replied on 3/31... > > > > > Thanks Todd, > > I was able to recover the system by resetting the high limit thermostat. > > From: [email protected] [mailto:[email protected]] On > Behalf Of Todd Salzman > Sent: Tuesday, March 31, 2015 10:35 AM > To: [email protected] > Subject: Re: Brewtus-2 doesn't heat either boiler > > Good info. The next step is to answer the questions in blue. > > Does the steam boiler heat up? > > No > > Does the big red light on the right side of the machine go on? > > No > > Do you have 110 volts between the top terminal on the pressure stat and > any copper pipe? > > Do you have 110 volts between the bottom wire on the pressure stat and any > copper pipe? > > What do the display on the PID say? > > PID display shows 18 (room temp) > > Is the small light on the PID flashing? > > No > > Is the small light on the PID on non stop? > > > > Does the pump run when you raise the brew lever? > > Yes > > > > > > On Tue, Mar 31, 2015 at 10:15 AM, Mark Fletcher <[email protected]> > wrote: > Does the steam boiler heat up? > > No > > Does the big red light on the right side of the machine go on? > > No > > What do the display on the PID say? > > PID display shows 18 (room temp) > > Is the small light on the PID flashing? > > No > > Does the pump run when you raise the brew lever? > > Yes > > > Can y’all give guidance on what I need to check? > > > Thanks > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of brewcru > Sent: Tuesday, April 07, 2015 11:43 PM > To: [email protected] > Subject: Re: Brew boiler won't heat > > I am dying here! > > New temp sensor, PID, and replay and same symptoms. $230 in parts. > > Only other thing I can think to try, replace pressurestat (don't think > that's the problem), and the two pin package at the top of the boiler > that's inline with the heater (what is that?). > > Will try wholelattelove again tomorrow. Would like some love from them. > Only thing I am getting is being sold expensive replacement parts I don't > need! Help would be nice. > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
