Just upgrade the element on the steam boiler to a 2000 watt version, I did it and have never looked back, sorts out the steam issue and can run at 1.1 bar all day without any problems.
JohnB On Sun, May 24, 2015 at 9:25 PM, Pavlos Kyprizlis <theoprofil...@gmail.com> wrote: > Thanks for your precious feedback. You dissapoint me because i thought > that if change the pressurstat with a pid the heater would had a faster > response due to solid states relays instead of a presurstat which i believe > has a slow response due to the logic of the response. (Must dedect the drop > pf pressure to turn on the heater). In other words the problem is that the > heater is only 1200 watt for a large 1,5 liters boiler. I read at the > group, that the Australian Version has 2200 watt heater, means almost > double power! So Australian version must be perfect. But why expobar didn't > put a 2200 watt heater at European 220 Volts machines? Also why Expobar > didn't put a double chanel PID that could control also the steam boiler. At > 2014 when brewtus IV launched the double channel PID costs 15 $ at China > and 30$ dollars to buy them from Gicar. > A double channel PID may cost less than a single channel PID and a > preurestat... Am i right? > At last i ask again if anyone knows about the 220 Volts if kick both > boilers together at the same time, or if there is someone made the > conversion and can upload an electric circuit of the conversion. > Thanks in advance one more time to every possible answer. > > Τη Κυριακή, 24 Μαΐου 2015 - 5:27:28 μ.μ. UTC+3, ο χρήστης Pavlos Kyprizlis > έγραψε: > >> Hallo to the group. I have a 220version of the machine. Do you know >> someone if the brewtus can kick simultaneously both boilers at 220volt? We >> have no problems with the Amps (220 volt houses) as you know. Has someone >> change the presurstat with a PID and could give as a feedback about the >> performance of the steam? e.g. the pressure gauge dropped quickly or not >> at the same quantities of milks.... >> Thanks in Advance for any answer! >> My brewtus is IV and of course we in Europe call the machine "Expobar >> Leva 2dual boiler " instead of "Expobar Brewtus" >> The heaters of the machine are both 1200 watt as US version. >> > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to brewtus+unsubscr...@googlegroups.com. > To post to this group, send email to brewtus@googlegroups.com. > Visit this group at http://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to brewtus+unsubscr...@googlegroups.com. To post to this group, send email to brewtus@googlegroups.com. Visit this group at http://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.