Hey there Ray! Good to see you on here again! You and I are of similar vintage, haha, I think my B2 is 2007 and I'm pretty sure yours would be a B2 also if from 2008. Searching the memory banks and I'm not totally sure, but didn't the B1 only have one pressure gauge instead of two?
If you search my posts from the past year, you'll find that I've just replaced damn near every part in the machine, save the static relay and wiring harness. Doing it all myself, it still made sense; but as you said, having someone else do it I think you'd pay for a new machine or close. Take good care and talk soon, Ben McCafferty Sent from my apple IIe > On Jan 13, 2016, at 08:07, herman dickens <[email protected]> wrote: > > I'm in NC just north of Raleigh so it's probably not doable. Hopefully > there's someone closer by that will be interested. The machines are pretty > solid but you may be better off getting the rotary with that many things > going wrong. I just replaced the display on mine a couple of years ago and > then the machine set idle for a year so mine is almost new. If you decide to > keep yours and fix it let me know and if I've done my conversion we can work > out something on the display. > >> On Wed, Jan 13, 2016 at 10:59 AM, Ray S. <[email protected]> wrote: >> I'm in Pennsylvania, pretty much equal distance from Philly and Wilmington, >> DE. I'd be happy to meet either place or you could come here if it's >> convenient. PM me if interested and I'll give you my phone # and we can work >> out the details... >> >> -Ray >> >>>> On Wednesday, January 13, 2016 at 10:47:53 AM UTC-5, herman dickens wrote: >>>> Where are you located? I might be interested. I just bought a pid, >>>> solenoid, 2 heat elements, a pressurestat, controller, on/off switch, and >>>> pump for mine so it's doubtful I'll have a lot more trouble with it >>>> anytime soon. Good luck whatever you decide. >>>> Herman >>>> >>>> On Wed, Jan 13, 2016 at 10:43 AM, Ray S. <[email protected]> wrote: >>>> I still have a 2008 model Brewtus - not sure if it's a I or II. I've been >>>> using it pretty much every day since. I was mildly active here when I was >>>> new to it, but hadn't visited this group / forum in years. Had it >>>> converted to rotary pump and plumbable about four years ago and actually >>>> plumbed it in about a year and a half ago when we had our kitchen >>>> remodeled. The only other mod I've done was to switch to a one-hole steam >>>> tip and I ripped the "no burn" tube out of the steam wand (replaced with a >>>> rubber sleeve over part of it), which improved steam pressure quite a bit. >>>> I still can't pour latte-art like I could with my previous Rancilio >>>> Silvia, but I'm pretty happy with the consistency of the milk/foam I've >>>> gotten since these mods. >>>> >>>> But the temperature controller (pre-PID) is shot (it holds steady at 92c, >>>> but none of the buttons do anything anymore - so it's stuck there) and the >>>> on-off switch is coming apart and all of the valves and seals could use a >>>> good overhaul. I've done some really minor maintenance over the years but >>>> the couple of more ambitious attempts I've made convinced me I'm not a >>>> tinkerer with stuff this small (I'm a pretty fair bike mechanic so I >>>> thought I had a shot, but I don't like getting into those tiny spaces >>>> around the boilers). I'm thinking about either sending it back in for a >>>> full overhaul and a PID conversion or trying to sell it for whatever I can >>>> get and buying a new Brewtus IV R. It seems that between the labor costs >>>> and the part costs and the SHIPPING costs (!), I can probably buy a new >>>> Brewtus IV refurb for just a few hundred $$ more than a full overhaul, >>>> particularly without any shipping cost.. And I wouldn't be without a >>>> machine for a month or so. The other thing I really like about the IV is >>>> the ability to turn the steam boiler on and off independent of the brew >>>> boiler. We do a fair number of shots and Americanos but usually only one >>>> or two milk drinks per day, so it would be good to be able to keep the >>>> steam boiler off most of the time... >>>> >>>> So I still have my very early (maybe not quite early-EST, not sure?) >>>> Brewtus. It's been well used and mostly quite reliable. But it may be near >>>> the end of it's run, at least in my kitchen. If anyone is a DIY type and >>>> is interested, particularly anyone in the mid-Atlantic area that could do >>>> an in-person delivery/pickup, let me know - I'll probably let it go for >>>> not very much. >>>> >>>> -Ray >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "Brewtus" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to [email protected]. >>>> To post to this group, send email to [email protected]. >>>> Visit this group at https://groups.google.com/group/brewtus. >>>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Brewtus" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at https://groups.google.com/group/brewtus. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
