Replace the miserable stock pressurestat with a higher quality MA-TER unit or for bigger bux, the Jaeger.
if it is older than 3 years or so, it is NOT reliable. don't fool around. On Thu, Apr 21, 2016 at 1:55 PM, Sludgemaster <[email protected]> wrote: > I have a B2 with a rotary conversion. Lately, it does not come up to > temperature when turned on. > > This appears to be related to the pressure-stat. When the steam pressure > reaches 1.8 the heat is cut off. If I drain some steam, the heat resumes > at 1.5. > Any diagnosis would be appreciated. > > Thanks, > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
