Hi Rich, There are bunch of things that could cause this.
I would recomend to go through this video and see if it help. https://www.youtube.com/watch?v=UIiLeRdVWAU&t=856s Todd Whole Latte Love On Mon, Mar 27, 2017 at 4:58 AM, Rich <[email protected]> wrote: > Hi All, > > I hope someone can help as i am a little stuck! I think i have potentially > googled everything possible and I think my girlfriend will leave me if i > spend too much more time fiddling with this machine. I bought an Office > Leva DB Rotary model that had a few issues as it was fairly cheap! I am not > too bad at fixing things in general and I wanted to learn on the way so > thought i would give it a go! > > I thought i found the issue last week as the capacitor was blown on the > circuit board (wahoo 20p fix!), I replaced this and stopped the relay > continuously clicking. I now have the dreaded 'very very occasionally she > fires up' issue. So the problem is; > > When i turn on the machine i get the relay click after a couple of > seconds. > If i turn on the steam boiler at the same time the red LED flashes when > the relay clicks. I think this means the controller is saying yes the > boiler is full (they are) so heat them up. At this point I guess something > is tripping the circuit and there isnt any power going to the heating > element. > I have checked the hilimit switches (and bypassed them) and i think they > are fine. The SSR light remains solid green so I guess that is fine as its > trying to say heat the boiler. The PID displays the room temp with a small > dot next to it. When i got the machine working the other week it all seemed > to work fine, PID was working etc. Only issue was the vacuum release stayed > open and was pushing out water (i was going to sort this when i have sorted > the current issue) > > I hope someone can help, I feel like i have checked all the wires for > contiunity, I have also checked the boilers and all seems fine. Sorry if > this isnt detailed enough, I have a small video I can upload if that helps! > > Many thanks > > Rich > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
