I'd try food safe liquid pipe dope. I think that will fix the problem
unless there's a crack in the fitting.

Herman

On Thu, Aug 10, 2017 at 2:51 PM, Toby Rose <tob...@gmail.com> wrote:

> Hi Guys,
>
> My Brewtus 4 developed a leak in the last few days.  Tracked it down to
> the steam boiler safety valve.  Took it off, cleaned and checked functions
> (all seems ok) and tried to re-assemble.  However it is still leaking very
> slightly, and the leak appears to come from the point on where the valve
> screws into the joint of cross (4 way) valve on the top of the boiler.
> Tried PTFE tape on the thread and a couple of different attempts, but
> always still leaking.
>
> Any top tips? I have some red locktite but hesitant to use it.
>
> Thanks in advance.
>
> Toby
>
> --
> You received this message because you are subscribed to the Google Groups
> "Brewtus" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to brewtus+unsubscr...@googlegroups.com.
> To post to this group, send email to brewtus@googlegroups.com.
> Visit this group at https://groups.google.com/group/brewtus.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to brewtus+unsubscr...@googlegroups.com.
To post to this group, send email to brewtus@googlegroups.com.
Visit this group at https://groups.google.com/group/brewtus.
For more options, visit https://groups.google.com/d/optout.

Reply via email to