Thanks Ira. The SSR take AC load on both sides and I believe I saw 110V on both sides( L1 and A2? ) when I measured. I'll confirm tonight. Seem like the other possibility is a bad PID but not sure how to check it. I did check the power to the PID and it is showing 110V and displaying the correct temp.
On Friday, October 27, 2017 at 12:39:03 PM UTC-4, Ira wrote: > > Hello BklynJim, > > Friday, October 27, 2017, 6:27:57 AM, you wrote: > > > ● SSR has 115V but no green light. > What does the other side of the SSR show? Read the label to see if it > takes low voltage DC or 117AC. If the SSR is getting the on signal and is > not conducting it would sure seem to be a likely suspect. > > -- Ira > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
