Hey Jim not sure from your name but do you live in Brooklyn? I'm in Long Island city and happen to have a spare SSD but planning on sending it back as it wasn't required for the pid installation looked WLL said it was. If you figure out from the boards it's ssd maybe you can borrow it for testing but I'll need it back for refund from WLL.
> On Oct 27, 2017, at 9:27 AM, BklynJim <[email protected]> wrote: > > > > > > Hey guys, > > So I have a problem with my Brewtus II with a retrofitted PID (did that last > year with help from this group). Yesterday morning the machine heated up > fine and was functioning normally, and then there was a loud popping noise > from the machine and the brew boiler temp starting falling. Brew boiler is > now not heating. Did some exploring last night following the WLL video: > > · PID has power, shows room temperature and a solid blue dot – > calling for heat. > > · SSR has 115V but no green light. > > · Resistance across each boiler is ~13 ohms. > > · Pressurestat tests normally > > > > Does this sound like a shot SSR? Anything else I should check? Thanks guys! > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
