Glad to hear. Those wires on the PID have a small set screw to hold them in place and make a good connection. I’d recommend you check/tighten that one plus all the others. A gentle tug should not pull the wire out of its place.
Best, bmc Sent from my iPhone > On Mar 3, 2019, at 18:42, Richard <[email protected]> wrote: > > > bmacpiper, > I found and solved the problem with the help of WLL tech support. > They pointed me to a video on diagnostics for electronic issue in the Brewtus. > > I opened it up. Poked around and found that a wire running from the PID to > the brew boiler had fallen out of the PID. > I pushed it back in. > The brew boiler is working again. >> > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
