Mikhail, The part from WLL worked out, it just took a while to get it because it was out of stock.
On Thu, Dec 5, 2019 at 4:01 PM Mikhail Peregudov <[email protected]> wrote: > Jason, > > Did you find the right part? Have same problem with my Office Lever. > > On Tuesday, April 2, 2019 at 11:52:26 AM UTC-5, Jason Brechin wrote: >> >> A leak developed where the PTFE tubing brings water from the pump toward >> the boilers. Going in to part 5 on page 18: >> https://wiki.wholelattelove.com/images/2/24/BREWTUS_IV_Parts_Diagram.pdf >> >> The diagram has part number 30400020, a 2-piece elbow with a part that >> screws over the PTFE tube pushed onto a male tip. The part in my machine >> was a push-to-connect fitting, as shown on WLL (currently out of stock): >> https://www.wholelattelove.com/products/expobar-elbow-replacement-kit >> >> The tech support suggested that the push-to-connect elbow fitting was the >> newer part, but mine mechanically failed. After attempting to re-seat the >> tube, the ring you push in to release the tube fell out/off the elbow. >> >> While this is carrying "cold" water, it seems to be a "hot" area, >> conducting a bit of heat from the boiler above. Can this be replaced with >> any other fitting or type of connection? Do the "old" elbows offer better >> reliability despite not being push-to-connect? Has anyone replaced this >> section with braided stainless or other alternatives? >> >> Thanks, >> Jason >> > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/brewtus/4c314477-413e-4854-a30a-5daaef03493c%40googlegroups.com > <https://groups.google.com/d/msgid/brewtus/4c314477-413e-4854-a30a-5daaef03493c%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/CAOH6poU8zxengo%2BbyCrF96-jqFkFJ0vtE8btGBYt1PO4qCQh8g%40mail.gmail.com.
