Maybe I could put something like this under the sink? https://www.amazon.com/Angle-Simple-Pressure-Regulator-Showerhead/dp/B0762NTDCF
On Sunday, December 29, 2019 at 1:14:50 PM UTC-6, wsmckenz wrote: > > Are there any opinions or specs on how much water volume/pressure you > should be getting via pre-infusion? I have an old BII that was converted to > rotary and plumbed in; with no portafilter in place, it draws about 8oz in > 30 seconds with the lever on the half-way stop. Does this seem > high/low/depends? I have no filter on the line right now, so maybe that > would change it. It also seems to pre-infuse pretty fast. With a double > shot loaded in the porta-filter, coffee appears within 3 or 4 seconds, and > the extraction speed is only slightly slower than with the pump running. > Seems wrong somehow, but I'm not sure what I would be adjusting, other than > maybe something in the water line itself. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/7f1aa32a-9aa1-44c9-a4b9-d80b434c25ec%40googlegroups.com.
