Hello 'Andrey, Wednesday, March 9, 2022, 1:10:40 PM, you wrote:
> Hi group. I recently replaced brew boiler heating element on my original > Brewtus 2. With new heating element installed and replaced vibratory pump, > deaerator and OPV I observe the following symptom: when machine is turned on > initially, pump turns on as usual, machine heats up to set 93C temperature. > But then, half an hour later, display suddenly drops into the 70C. What can > be the culprit to check? Thanks When it drops, is it really cold or is it really hot? It could be doing this because the sensor gets messed up when it gets hot and in that case the brew boiler should get really hot. If for some reason the steam boiler is not heating properly, that would also cause the brew -- Ira -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/1666607450.20220309141108%40gmail.com.
