hi Ira, that picture isn't from my machine. I found the thread after joining the Brewtus group and searching. But I'm pretty certain the control board for my Brewtus II is bad (pump runs continously), tested other parts in machine, etc. Don't have a picture as I'm at work but can get one. it's a Giemme EX-60100210 with 8 connectors. Nothing showing burned out. Willing to test with a multimeter if you want to have me check. May need to do this over the weekend but please let know.
thanks, Mark On Thursday, September 22, 2022 at 2:49:25 PM UTC-5 Ira wrote: > Hello Mark, > > > Thursday, September 22, 2022, 12:24:47 PM, you wrote: > > hello, I've been looking everywhere online to replace my Brewtus II > control board. I started with WLL and purchased the pid kit and the > Giemme EX-60100210; but the board is out of stock and who knows if or when > it'll be available. I've seen possible replacements online but wondering > if anyone has suggestions. The original Giemme RL > > > I can't tell from your picture what the problem is or what box you need. I > have a bunch of spaces for a B-II. My spares are at the shop so I can't go > look now. Do you have a picture of the problem controller? Where are you > located? You can also try > http://boytenterprises.com/collections/electronics. I've been known to > fix them on occasion. If you have a volt meter and are willing to check > something, I'll tell you if I have the parts to fix it. It's generally ony > one of 2 parts that dies. > > > -- Ira > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/61f9d781-18cd-4af3-ae66-59d70b1dcaa4n%40googlegroups.com.
