Hello Mark,
Thursday, September 22, 2022, 3:03:32 PM, you wrote:
hi Ira, that picture isn't from my machine. I found the thread after joining the Brewtus group and searching. But I'm pretty certain the control board for my Brewtus II is bad (pump runs continously), tested other parts in machine, etc. Don't have a picture as I'm at work but can get one. it's a Giemme EX-60100210 with 8 connectors. Nothing showing burned out. Willing to test with a multimeter if you want to have me check. May need to do this over the weekend but please let know.
I would like to know the voltage coming out of the transformer mounted on the board inside the controller. Should be 117V on one side and 15V or 18V AC on the output. The transformer is the part that goes out the most followed by relays or the bridge rectifier.
-- Ira
--You received this message because you are subscribed to the Google Groups "Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/1684093838.20220922172333%40gmail.com.
