Suggest doing a google search on the part number, the manufacturer will surely 
have instructions on their website.  Pretty sure you’ll find the answer to your 
issue.

 

From: [email protected] <[email protected]> On Behalf Of Josh 
harper
Sent: Sunday, February 16, 2025 5:43 PM
To: Brewtus <[email protected]>
Subject: Re: Temperature not shutting off at programmed Temperature

 

Thanks! I bought it as a straight replacement part and it didn't come with any 
instructions. 

On Sunday, February 16, 2025 at 8:00:10 AM UTC-5 [email protected] 
<mailto:[email protected]>  wrote:

If I remember correctly, those controllers are factory set to behave 
differently based on use. Read the instructions and see if there is any 
indication. For example, the same controller is used for refrigeration and may 
be set at the factory for that use. 

 

You can set the controller for different uses through the display, similar to 
setting the temp. The instructions should offer some clues. 

 

Good luck!

 


On Feb 15, 2025, at 12:02 PM, Josh harper <[email protected] 
<mailto:[email protected]> > wrote:

Hello, I have a Brewtus III with a Rotary pump, Brew Boiler Stopped heating up 
and I diagnosed the original PID was bad. Replaced the PID and turned it on. 
Set the new PID to 195 and waited till it heated up. It got to 195 and just 
kept on going, I shut it off when it hit 220. Waited a couple hours and turned 
it back on and it did the same thing. 


Any help would be appreciated!  

-- 
You received this message because you are subscribed to the Google Groups 
"Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected] <mailto:[email protected]> .
To view this discussion visit 
https://groups.google.com/d/msgid/brewtus/6f22bd21-099e-4df7-a862-48fd319a4879n%40googlegroups.com
 
<https://groups.google.com/d/msgid/brewtus/6f22bd21-099e-4df7-a862-48fd319a4879n%40googlegroups.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected] 
<mailto:[email protected]> .
To view this discussion visit 
https://groups.google.com/d/msgid/brewtus/98595d86-8dd3-4924-a4c4-4dc13f5041den%40googlegroups.com
 
<https://groups.google.com/d/msgid/brewtus/98595d86-8dd3-4924-a4c4-4dc13f5041den%40googlegroups.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion visit 
https://groups.google.com/d/msgid/brewtus/003e01db80df%24876b7370%2496425a50%24%40gmail.com.

Reply via email to