> I'm trying to set up a simple bridge without firewalling. I use suse 8.0 > kernel 2.4.18. for setting it up I did: > > rpm -i bridge-utils-0.9.6.rpm (the i386 version) > ifconfig eth0 0.0.0.0 > ifconfig eth1 0.0.0.0 > brctl addbr b > brctl addif eth0 > brctl addif eth1 > > I guess this is ok. At least 18 months ago it was. Problem is, I get no > traffic through the bridge. It's not being switched.
I believe you also need an ifconfig b up line .... Best regards , -- ============================================================================= Dimitris Zilaskos Department of Physics @ Aristotle Univercity of Thessaloniki , Greece PGP key : http://tassadar.physics.auth.gr/~dzila/pgp_public_key.asc http://egnatia.ee.auth.gr/~dzila/pgp_public_key.asc MD5sum : 4f84f3f53cb046008b4abcb2a092d28d pgp_public_key.asc ============================================================================= _______________________________________________ Bridge mailing list [EMAIL PROTECTED] http://www.math.leidenuniv.nl/mailman/listinfo/bridge
