Philipp, You need to do one last thing:
ifconfig b 0.0.0.0 This makes the bridge interface active. You can even give it an IP address if required. Paul > kernel 2.4.18. for setting it up I did: > > rpm -i bridge-utils-0.9.6.rpm (the i386 version) > ifconfig eth0 0.0.0.0 > ifconfig eth1 0.0.0.0 > brctl addbr b > brctl addif eth0 > brctl addif eth1 > > I guess this is ok. At least 18 months ago it was. Problem is, I get no > traffic through the bridge. It's not being switched. > > TIA > Philipp _______________________________________________ Bridge mailing list [EMAIL PROTECTED] http://www.math.leidenuniv.nl/mailman/listinfo/bridge
