Gunnar Schaller pravi:
Hello,
First show the last lines of "dmesg" after loading your patched qozap.
I've compiled 0.3.0-PREy-j with qozap patch and now the hardware is
detected and zaptel is loaded.
Thanks for help
Sebek
Regards,
Gunnar Schaller
Wednesday, November 5, 2008, 10:35:55 AM, you wrote:
Hello
We were using a quadbri card from Junghanns, and now bought openvox b800p
I tried to compile briistuff with openvox qozap patch but no luck....
[EMAIL PROTECTED]:~# ztcfg -vvvv
Zaptel Configuration
======================
SPAN 1: CCS/ AMI Build-out: 133-266 feet (DSX-1)
SPAN 2: CCS/ AMI Build-out: 133-266 feet (DSX-1)
SPAN 3: CCS/ AMI Build-out: 133-266 feet (DSX-1)
SPAN 4: CCS/ AMI Build-out: 133-266 feet (DSX-1)
SPAN 5: CCS/ AMI Build-out: 133-266 feet (DSX-1)
SPAN 6: CCS/ AMI Build-out: 133-266 feet (DSX-1)
SPAN 7: CCS/ AMI Build-out: 133-266 feet (DSX-1)
SPAN 8: CCS/ AMI Build-out: 133-266 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: D-channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: D-channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: D-channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: D-channel (Default) (Slaves: 12)
Channel 13: Clear channel (A-law) (Slaves: 13)
Channel 14: D-channel (Default) (Slaves: 14)
Channel 15: Clear channel (A-law) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Clear channel (A-law) (Slaves: 17)
Channel 18: D-channel (Default) (Slaves: 18)
Channel 19: Clear channel (A-law) (Slaves: 19)
Channel 20: D-channel (Default) (Slaves: 20)
20 channels configured.
ZT_SPANCONFIG failed on span 1: No such device or address (6)
I get this error.
Any suggestions how to make an easiest transition between two cards?
We have bristuff-0.3.0-PRE-1q installed
Thank you
_______________________________________________
Bristuff-users mailing list
[email protected]
http://lists.three-dimensional.net/mailman/listinfo/bristuff-users
--
Sebastijan Šilec, sistemska podpora
Predlog! Obiscite prenovljeno spletno stran http://www.agenda.si
ODPRTA KODA IN LINUX
STORITVE : POSLOVNE RESITVE : UPRAVLJANJE IT : INFRASTRUKTURA IT :
IZOBRAZEVANJE : PROGRAMSKA OPREMA
Visit our updated web page at http://www.agenda.si
OPEN SOURCE AND LINUX
SERVICES : BUSINESS SOLUTIONS : IT MANAGEMENT : IT INFRASTRUCTURE :
TRAINING : SOFTWARE
begin:vcard
fn;quoted-printable:Sebastijan =C5=A0ilec
n;quoted-printable:=C5=A0ilec;Sebastijan
org:Agenda OpenSystems d.o.o.;IT
adr:;;Ul. Pohorskega bataljina 49;Maribor;;2000;Slovenija
email;internet:[EMAIL PROTECTED]
title:System Admin.
note:www.agenda.si
url:http://www.agenda.si
version:2.1
end:vcard
_______________________________________________
Bristuff-users mailing list
[email protected]
http://lists.three-dimensional.net/mailman/listinfo/bristuff-users
