THANKS!  That solved the problem.

On 2014-09-07 19:21, Christopher Sean Morrison wrote:
> Hi Dan,
>
> At a quick glance, it's expecting a simple '-' hypen but it looks like you've 
> provided an '–' em dash.  Perhaps this is a copy-paste issue where the 
> character used in the (pdf/html) lesson you're using is not what one would 
> type, but looks very similar.  I suggest try typing a simple dash (a minus 
> sign) and see if it still complains about a bad operation.  Hopefully, that's 
> all it is.
>
> Cheers!
> Sean
>
>
> On Sep 7, 2014, at 6:45 PM, Dan Beavers wrote:
>
>> I am working through the Introduction to MGED tutorial and am on Lesson
>> 13 section 3.  The "r base1.r – rcc2.s" command does not work properly.
>>   I was originally working in Archer and then tried it in mged.  Archer
>> does not complain but mged does.  Here is a log of my actions in mged
>> 7.24.0:
>> mged> ls
>> arb8.s              candle1.r/R         eto2.s              rcc2.s
>> base1.r/R           eto1.s              rcc1.s              table1.r/R
>>
>> mged> tree
>> base1.r/R
>>      u eto1.s
>>      u rcc1.s
>>      u eto2.s
>>
>> candle1.r/R
>>      u rcc2.s
>>
>> mged> r base1.r – rcc2.s
>> bad operation: – skip member: rcc2.s
>>
>> I am running Windows 8.1.
>>
>> Thanks for any help.
>> Dan
>
>

------------------------------------------------------------------------------
Want excitement?
Manually upgrade your production database.
When you want reliability, choose Perforce
Perforce version control. Predictably reliable.
http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk
_______________________________________________
BRL-CAD Users mailing list
brlcad-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/brlcad-users

Reply via email to