Yes. It is the XWindow driver simulator. I am pressing DOT1 and DOT2 separately in sequence using mouse. Do there have any option to press simultaneously. How do we interpret this at a cursor location pressing DOT1-DOT2-DOT3 for example in sequence against simultaneously.
And in actual device how is it done. And is it possible do to in the simulator. Another related question , we are going to get Freedom Scienific Focus 14 for initial development. In the README ( for FreedomScientific Driver , did not see Focus 14). So is it compatible with brltty. Thanks, Siju samuel On Thu, Sep 26, 2013 at 11:44 AM, Dave Mielke <[email protected]> wrote: > [quoted lines by Siju Samuel on 2013/09/26 at 11:22 -0500] > > >Currently I am using the brltty simulator and expecting a real device > soon. > > I have checked the brltty log as well, which also gives codes > >corresponding to DOT1, DOT2 for the entry corresponding to character "b" > >[which is *client code 0000000000000061, client code 0000000000000031 *] > >. With reference to your reply; in actual device, is it supposed to get > >only ONE client code corresponding to the entry DOT1 and DOT2 between two > >CURSOR keys. > > By simulator, do you mean the XWindow driver? If so, I'm suspecting that > you're > actually pressing dots 1 and 2 separately rather than together. Is that > correct? > > -- > Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of > God. > Phone: 1-613-726-0014 | Ottawa, Ontario | http://Mielke.cc/bible/ > EMail: [email protected] | Canada K2A 1H7 | http://FamilyRadio.com/ > _______________________________________________ > This message was sent via the BRLTTY mailing list. > To post a message, send an e-mail to: [email protected] > For general information, go to: http://mielke.cc/mailman/listinfo/brltty >
_______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
