Hi! THe beep is heard with a single line movement. But the display does not move. /A > 23 sep. 2016 kl. 03:02 skrev Dave Mielke <[email protected]>: > > [quoted lines by Anders Holmberg on 2016/09/23 at 00:21 +0300] > >>>> Only a beep sound is heard like when you???re at the top or the bottom of >>>> the screen. >>> >>> Always, or only after you press up/down enough times? > > You didn't answer this question. Maybe it wasn't clear. > > Do you hear a beep every single time you try to move, say, up or down, or do > you need to repeatedly press the up or down key enough times to reach the top > or bottom of the screen before you start to hear the beep? > >>>> Also if i set brltty to skip blank lines i can not use the display to >>>> navigate >>>> in Orca. >>> >>> Yes, that's probably expected. With that setting, brltty sends a different >>> pair >>> of commands that Orca probably isn't supporting. >> >> And what is orca not supporting thats need to be supported. > > When the Skip Identical Lines preference isn't set then brltty delivers the > command pair LNUP/LNDN to Orca. When it is set then brltty delivers the > command > pair PRDIFLN/NXDIFLN to Orca. > > -- > Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of God. > Phone: 1-613-726-0014 | Ottawa, Ontario | http://Mielke.cc/bible/ > EMail: [email protected] | Canada K2A 1H7 | http://FamilyRadio.org/ > _______________________________________________ > This message was sent via the BRLTTY mailing list. > To post a message, send an e-mail to: [email protected] > For general information, go to: http://mielke.cc/mailman/listinfo/brltty
_______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
