Never run OBSD in this laptop before.Downloaded the 5.1-current(x86_64)
install snapshot (25/05/2012).
Begun installation and the only thing out of the ordinary during the installer
kernel booting is this line:
uhub0: device problem, disabling port 1
>From this line on installation goes normally and smoothly, but then after
reboot kernel panics and leaves me at dbb.
Here are the outputs i could gather:
dmesg:
OpenBSD 5.1-current (GENERIC.MP) #302: Fri May 25 19:24:55 MDT 2012
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4138987520 (3947MB)
avail mem = 4006449152 (3820MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe65a0 (52 entries)
bios0: vendor Acer version "V1.20" date 03/16/2012
bios0: Acer Aspire 5750
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP ASF! HPET APIC MCFG SLIC SSDT BOOT ASPT SSDT SSDT
acpi0: wakeup devices POP1(S4) GLAN(S0) EHC1(S3) HDEF(S0) PXSX(S4) RP01(S4)
PXS
X(S4) PXSX(S4) PXSX(S4) RP04(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) PEG0(S4)
P
EGP(S4) PEG1(S4) PEG2(S4) PEG3(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2295.21 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES
T,
TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 99 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2294.79 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES
T,
TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF
cpu1: 256KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2294.79 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES
T,
TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF
cpu2: 256KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2294.79 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES
T,
TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF
cpu3: 256KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (POP1)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 3 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0Store to default type! 8
1f45 Called: \_SB_.PCI0.LPCB.EC0_._REG
arg0: 0xffff8000001ac208 cnt:01 stk:00 integer: 3
arg1: 0xffff8000001ac188 cnt:02 stk:00 integer: 1
1f74 Called: \_SB_.PCI0.LPCB.EC0_._REG
arg0: 0xffff8000001ac208 cnt:01 stk:00 integer: 3
arg1: 0xffff8000001ac188 cnt:02 stk:00 integer: 1
panic: aml_die aml_store:2584
Stopped at Debugger+0x5: leave
Debugger() at Debugger+0x5
panic() at panic+0xe4
_aml_die() at _aml_die+0x183
aml_store() at aml_store+0xbb
aml_parse() at aml_parse+0xcd7
aml_eval() at aml_eval+0x1c8
aml_evalnode() at aml_evalnode+0x63
acpiec_reg() at acpiec_reg+0x77
acpiec_attach() at acpiec_attach+0x41
config_attach() at config_attach+0x1d4
end trace frame: 0xffffffff80e4aa00, count: 0
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
IF RUNNING SMP, USE 'mach ddbcpu <#>' AND 'trace' ON OTHER PROCESSORS, TOO.
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
Trace output:
Debugger() at Debugger+0x5
panic() at panic+0xe4
_aml_die() at _aml_die+0x183
aml_store() at aml_store+0xbb
aml_parse() at aml_parse+0xcd7
aml_eval() at aml_eval+0x1c8
aml_evalnode() at aml_evalnode+0x63
acpiec_reg() at acpiec_reg+0x77
acpiec_attach() at acpiec_attach+0x41
config_attach() at config_attach+0x1d4
acpi_foundec() at acpi_foundec+0xce
aml_find_node() at aml_find_node+0x92
aml_find_node() at aml_find_node+0x87
aml_find_node() at aml_find_node+0x87
aml_find_node() at aml_find_node+0x87
aml_find_node() at aml_find_node+0x87
aml_find_node() at aml_find_node+0x87
acpi_attach() at acppi_attach+0x4f0
config_attach() at config_attach+0x1d4
bios_attach() at bios_attach+0x218
config_attach() at config_attach+0x1d4
mainbus_attach() at mainbus_attach+0x53
config_attach() at config_attach+0x1d4
cpu_configure() at cpu_configure+0x17
main() at main+0x3f5
end trace frame: 0x0, count: -25
Ps output:
PID PPID PGRP UID S FLAGS WAIT COMMAND
* 0 -1 0 0 7 0X200 swapper
I thought that this could be a -current problem so downloaded
5.1-release(x86_64),
which presented only minor diferences.
upon booting installer kernel :
uhub0: device problem, disabling port 1
then after install:
dmesg:
OpenBSD 5.1 (GENERIC.MP) #207: Sun Feb 12 09:42:14 MST 2012
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4138987520 (3947MB)
avail mem = 4014641152 (3828MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe65a0 (52 entries)
bios0: vendor Acer version "V1.20" date 03/16/2012
bios0: Acer Aspire 5750
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP ASF! HPET APIC MCFG SLIC SSDT BOOT ASPT SSDT SSDT
acpi0: wakeup devices POP1(S4) GLAN(S0) EHC1(S3) HDEF(S0) PXSX(S4) RP01(S4)
PXS
X(S4) PXSX(S4) PXSX(S4) RP04(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) PEG0(S4)
P
EGP(S4) PEG1(S4) PEG2(S4) PEG3(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2295.15 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES
T,
TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 99 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2294.79 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES
T,
TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF
cpu1: 256KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2294.79 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES
T,
TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF
cpu2: 256KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2294.79 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES
T,
TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF
cpu3: 256KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (POP1)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 3 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0Store to default type! 8
1f45 Called: \_SB_.PCI0.LPCB.EC0_._REG
arg0: 0xffff8000001ac208 cnt:01 stk:00 integer: 3
arg1: 0xffff8000001ac188 cnt:02 stk:00 integer: 1
1f74 Called: \_SB_.PCI0.LPCB.EC0_._REG
arg0: 0xffff8000001ac208 cnt:01 stk:00 integer: 3
arg1: 0xffff8000001ac188 cnt:02 stk:00 integer: 1
panic: aml_die aml_store:2584
Stopped at Debugger+0x5: leave
Debugger() at Debugger+0x5
panic() at panic+0xe4
_aml_die() at _aml_die+0x183
aml_store() at aml_store+0xbb
aml_parse() at aml_parse+0xcd7
aml_eval() at aml_eval+0x1c8
aml_evalnode() at aml_evalnode+0x63
acpiec_reg() at acpiec_reg+0x6a
acpiec_attach() at acpiec_attach+0x41
config_attach() at config_attach+0x1d4
end trace frame: 0xffffffff80e3ba00, count: 0
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
IF RUNNING SMP, USE 'mach ddbcpu <#>' AND 'trace' ON OTHER PROCESSORS, TOO.
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
Trace output:
Debugger() at Debugger+0x5
panic() at panic+0xe4
_aml_die() at _aml_die+0x183
aml_store() at aml_store+0xbb
aml_parse() at aml_parse+0xcd7
aml_eval() at aml_eval+0x1c8
aml_evalnode() at aml_evalnode+0x63
acpiec_reg() at acpiec_reg+0x6a
acpiec_attach() at acpiec_attach+0x41
config_attach() at config_attach+0x1d4
acpi_foundec() at acpi_foundec+0xce
aml_find_node() at aml_find_node+0x92
aml_find_node() at aml_find_node+0x87
aml_find_node() at aml_find_node+0x87
aml_find_node() at aml_find_node+0x87
aml_find_node() at aml_find_node+0x87
aml_find_node() at aml_find_node+0x87
acpi_attach() at acppi_attach+0x4f0
config_attach() at config_attach+0x1d4
bios_attach() at bios_attach+0x218
config_attach() at config_attach+0x1d4
mainbus_attach() at mainbus_attach+0x53
config_attach() at config_attach+0x1d4
cpu_configure() at cpu_configure+0x17
main() at main+0x405
end trace frame: 0x0, count: -25
Ps output:
PID PPID PGRP UID S FLAGS WAIT COMMAND
* 0 -1 0 0 7 0X200 swapper
I'm available for reply but please note that i'm not a coder.
Thaks for your time & best regards
Adalberto
