Try with acpi disabled.
2012/6/4, Adalberto Junior <[email protected]>: > Never run OBSD in this laptop before.Downloaded the 5.1-current(x86_64) > install snapshot (25/05/2012). > Begun installation and the only thing out of the ordinary during the > installer > kernel booting is this line: > > uhub0: device problem, disabling port 1 > > From this line on installation goes normally and smoothly, but then after > reboot kernel panics and leaves me at dbb. > Here are the outputs i could gather: > > dmesg: > > OpenBSD 5.1-current (GENERIC.MP) #302: Fri May 25 19:24:55 MDT 2012 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4138987520 (3947MB) > avail mem = 4006449152 (3820MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe65a0 (52 entries) > bios0: vendor Acer version "V1.20" date 03/16/2012 > bios0: Acer Aspire 5750 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP ASF! HPET APIC MCFG SLIC SSDT BOOT ASPT SSDT SSDT > acpi0: wakeup devices POP1(S4) GLAN(S0) EHC1(S3) HDEF(S0) PXSX(S4) RP01(S4) > PXS > X(S4) PXSX(S4) PXSX(S4) RP04(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) > PEG0(S4) > P > EGP(S4) PEG1(S4) PEG2(S4) PEG3(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2295.21 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C > FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES > T, > TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: apic clock running at 99 MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2294.79 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C > FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES > T, > TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF > cpu1: 256KB 64b/line 8-way L2 cache > cpu2 at mainbus0: apid 2 (application processor) > cpu2: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2294.79 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C > FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES > T, > TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF > cpu2: 256KB 64b/line 8-way L2 cache > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2294.79 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C > FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES > T, > TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF > cpu3: 256KB 64b/line 8-way L2 cache > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (POP1) > acpiprt2 at acpi0: bus 2 (RP01) > acpiprt3 at acpi0: bus 3 (RP02) > acpiprt4 at acpi0: bus -1 (RP03) > acpiprt5 at acpi0: bus -1 (RP04) > acpiprt6 at acpi0: bus -1 (RP05) > acpiprt7 at acpi0: bus -1 (RP06) > acpiprt8 at acpi0: bus -1 (RP07) > acpiprt9 at acpi0: bus -1 (RP08) > acpiprt10 at acpi0: bus -1 (PEG0) > acpiprt11 at acpi0: bus -1 (PEG1) > acpiprt12 at acpi0: bus -1 (PEG2) > acpiprt13 at acpi0: bus -1 (PEG3) > acpiec0 at acpi0Store to default type! 8 > > 1f45 Called: \_SB_.PCI0.LPCB.EC0_._REG > arg0: 0xffff8000001ac208 cnt:01 stk:00 integer: 3 > arg1: 0xffff8000001ac188 cnt:02 stk:00 integer: 1 > 1f74 Called: \_SB_.PCI0.LPCB.EC0_._REG > arg0: 0xffff8000001ac208 cnt:01 stk:00 integer: 3 > arg1: 0xffff8000001ac188 cnt:02 stk:00 integer: 1 > panic: aml_die aml_store:2584 > Stopped at Debugger+0x5: leave > Debugger() at Debugger+0x5 > panic() at panic+0xe4 > _aml_die() at _aml_die+0x183 > aml_store() at aml_store+0xbb > aml_parse() at aml_parse+0xcd7 > aml_eval() at aml_eval+0x1c8 > aml_evalnode() at aml_evalnode+0x63 > acpiec_reg() at acpiec_reg+0x77 > acpiec_attach() at acpiec_attach+0x41 > config_attach() at config_attach+0x1d4 > end trace frame: 0xffffffff80e4aa00, count: 0 > RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC! > IF RUNNING SMP, USE 'mach ddbcpu <#>' AND 'trace' ON OTHER PROCESSORS, TOO. > DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION! > > Trace output: > > Debugger() at Debugger+0x5 > panic() at panic+0xe4 > _aml_die() at _aml_die+0x183 > aml_store() at aml_store+0xbb > aml_parse() at aml_parse+0xcd7 > aml_eval() at aml_eval+0x1c8 > aml_evalnode() at aml_evalnode+0x63 > acpiec_reg() at acpiec_reg+0x77 > acpiec_attach() at acpiec_attach+0x41 > config_attach() at config_attach+0x1d4 > acpi_foundec() at acpi_foundec+0xce > aml_find_node() at aml_find_node+0x92 > aml_find_node() at aml_find_node+0x87 > aml_find_node() at aml_find_node+0x87 > aml_find_node() at aml_find_node+0x87 > aml_find_node() at aml_find_node+0x87 > aml_find_node() at aml_find_node+0x87 > acpi_attach() at acppi_attach+0x4f0 > config_attach() at config_attach+0x1d4 > bios_attach() at bios_attach+0x218 > config_attach() at config_attach+0x1d4 > mainbus_attach() at mainbus_attach+0x53 > config_attach() at config_attach+0x1d4 > cpu_configure() at cpu_configure+0x17 > main() at main+0x3f5 > end trace frame: 0x0, count: -25 > > Ps output: > > PID PPID PGRP UID S FLAGS WAIT COMMAND > * 0 -1 0 0 7 0X200 swapper > > > I thought that this could be a -current problem so downloaded > 5.1-release(x86_64), > which presented only minor diferences. > > > upon booting installer kernel : > > uhub0: device problem, disabling port 1 > > then after install: > > dmesg: > > OpenBSD 5.1 (GENERIC.MP) #207: Sun Feb 12 09:42:14 MST 2012 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4138987520 (3947MB) > avail mem = 4014641152 (3828MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe65a0 (52 entries) > bios0: vendor Acer version "V1.20" date 03/16/2012 > bios0: Acer Aspire 5750 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP ASF! HPET APIC MCFG SLIC SSDT BOOT ASPT SSDT SSDT > acpi0: wakeup devices POP1(S4) GLAN(S0) EHC1(S3) HDEF(S0) PXSX(S4) RP01(S4) > PXS > X(S4) PXSX(S4) PXSX(S4) RP04(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) > PEG0(S4) > P > EGP(S4) PEG1(S4) PEG2(S4) PEG3(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2295.15 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C > FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES > T, > TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: apic clock running at 99 MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2294.79 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C > FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES > T, > TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF > cpu1: 256KB 64b/line 8-way L2 cache > cpu2 at mainbus0: apid 2 (application processor) > cpu2: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2294.79 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C > FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES > T, > TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF > cpu2: 256KB 64b/line 8-way L2 cache > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2294.79 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C > FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES > T, > TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF > cpu3: 256KB 64b/line 8-way L2 cache > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (POP1) > acpiprt2 at acpi0: bus 2 (RP01) > acpiprt3 at acpi0: bus 3 (RP02) > acpiprt4 at acpi0: bus -1 (RP03) > acpiprt5 at acpi0: bus -1 (RP04) > acpiprt6 at acpi0: bus -1 (RP05) > acpiprt7 at acpi0: bus -1 (RP06) > acpiprt8 at acpi0: bus -1 (RP07) > acpiprt9 at acpi0: bus -1 (RP08) > acpiprt10 at acpi0: bus -1 (PEG0) > acpiprt11 at acpi0: bus -1 (PEG1) > acpiprt12 at acpi0: bus -1 (PEG2) > acpiprt13 at acpi0: bus -1 (PEG3) > acpiec0 at acpi0Store to default type! 8 > > 1f45 Called: \_SB_.PCI0.LPCB.EC0_._REG > arg0: 0xffff8000001ac208 cnt:01 stk:00 integer: 3 > arg1: 0xffff8000001ac188 cnt:02 stk:00 integer: 1 > 1f74 Called: \_SB_.PCI0.LPCB.EC0_._REG > arg0: 0xffff8000001ac208 cnt:01 stk:00 integer: 3 > arg1: 0xffff8000001ac188 cnt:02 stk:00 integer: 1 > panic: aml_die aml_store:2584 > Stopped at Debugger+0x5: leave > Debugger() at Debugger+0x5 > panic() at panic+0xe4 > _aml_die() at _aml_die+0x183 > aml_store() at aml_store+0xbb > aml_parse() at aml_parse+0xcd7 > aml_eval() at aml_eval+0x1c8 > aml_evalnode() at aml_evalnode+0x63 > acpiec_reg() at acpiec_reg+0x6a > acpiec_attach() at acpiec_attach+0x41 > config_attach() at config_attach+0x1d4 > end trace frame: 0xffffffff80e3ba00, count: 0 > RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC! > IF RUNNING SMP, USE 'mach ddbcpu <#>' AND 'trace' ON OTHER PROCESSORS, TOO. > DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION! > > Trace output: > > Debugger() at Debugger+0x5 > panic() at panic+0xe4 > _aml_die() at _aml_die+0x183 > aml_store() at aml_store+0xbb > aml_parse() at aml_parse+0xcd7 > aml_eval() at aml_eval+0x1c8 > aml_evalnode() at aml_evalnode+0x63 > acpiec_reg() at acpiec_reg+0x6a > acpiec_attach() at acpiec_attach+0x41 > config_attach() at config_attach+0x1d4 > acpi_foundec() at acpi_foundec+0xce > aml_find_node() at aml_find_node+0x92 > aml_find_node() at aml_find_node+0x87 > aml_find_node() at aml_find_node+0x87 > aml_find_node() at aml_find_node+0x87 > aml_find_node() at aml_find_node+0x87 > aml_find_node() at aml_find_node+0x87 > acpi_attach() at acppi_attach+0x4f0 > config_attach() at config_attach+0x1d4 > bios_attach() at bios_attach+0x218 > config_attach() at config_attach+0x1d4 > mainbus_attach() at mainbus_attach+0x53 > config_attach() at config_attach+0x1d4 > cpu_configure() at cpu_configure+0x17 > main() at main+0x405 > end trace frame: 0x0, count: -25 > > Ps output: > > PID PPID PGRP UID S FLAGS WAIT COMMAND > * 0 -1 0 0 7 0X200 swapper > > > I'm available for reply but please note that i'm not a coder. > > Thaks for your time & best regards > Adalberto
