running with acpi disabled could cause the fan to stop working. Careful with this.
On Mon, Jun 4, 2012 at 8:21 PM, Gregor Pintar <[email protected]> wrote: > Try with acpi disabled. > > > 2012/6/4, Adalberto Junior <[email protected]>: >> Never run OBSD in this laptop before.Downloaded the 5.1-current(x86_64) >> install snapshot (25/05/2012). >> Begun installation and the only thing out of the ordinary during the >> installer >> kernel booting is this line: >> >> uhub0: device problem, disabling port 1 >> >> From this line on installation goes normally and smoothly, but then after >> reboot kernel panics and leaves me at dbb. >> Here are the outputs i could gather: >> >> dmesg: >> >> OpenBSD 5.1-current (GENERIC.MP) #302: Fri May 25 19:24:55 MDT 2012 >> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP >> real mem = 4138987520 (3947MB) >> avail mem = 4006449152 (3820MB) >> mainbus0 at root >> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe65a0 (52 entries) >> bios0: vendor Acer version "V1.20" date 03/16/2012 >> bios0: Acer Aspire 5750 >> acpi0 at bios0: rev 2 >> acpi0: sleep states S0 S3 S4 S5 >> acpi0: tables DSDT FACP ASF! HPET APIC MCFG SLIC SSDT BOOT ASPT SSDT SSDT >> acpi0: wakeup devices POP1(S4) GLAN(S0) EHC1(S3) HDEF(S0) PXSX(S4) RP01(S4) >> PXS >> X(S4) PXSX(S4) PXSX(S4) RP04(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) >> PEG0(S4) >> P >> EGP(S4) PEG1(S4) PEG2(S4) PEG3(S4) >> acpitimer0 at acpi0: 3579545 Hz, 24 bits >> acpihpet0 at acpi0: 14318179 Hz >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >> cpu0 at mainbus0: apid 0 (boot processor) >> cpu0: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2295.21 MHz >> cpu0: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C >> FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES >> T, >> TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF >> cpu0: 256KB 64b/line 8-way L2 cache >> cpu0: apic clock running at 99 MHz >> cpu1 at mainbus0: apid 1 (application processor) >> cpu1: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2294.79 MHz >> cpu1: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C >> FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES >> T, >> TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF >> cpu1: 256KB 64b/line 8-way L2 cache >> cpu2 at mainbus0: apid 2 (application processor) >> cpu2: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2294.79 MHz >> cpu2: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C >> FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES >> T, >> TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF >> cpu2: 256KB 64b/line 8-way L2 cache >> cpu3 at mainbus0: apid 3 (application processor) >> cpu3: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2294.79 MHz >> cpu3: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C >> FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES >> T, >> TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF >> cpu3: 256KB 64b/line 8-way L2 cache >> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins >> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 >> acpiprt0 at acpi0: bus 0 (PCI0) >> acpiprt1 at acpi0: bus -1 (POP1) >> acpiprt2 at acpi0: bus 2 (RP01) >> acpiprt3 at acpi0: bus 3 (RP02) >> acpiprt4 at acpi0: bus -1 (RP03) >> acpiprt5 at acpi0: bus -1 (RP04) >> acpiprt6 at acpi0: bus -1 (RP05) >> acpiprt7 at acpi0: bus -1 (RP06) >> acpiprt8 at acpi0: bus -1 (RP07) >> acpiprt9 at acpi0: bus -1 (RP08) >> acpiprt10 at acpi0: bus -1 (PEG0) >> acpiprt11 at acpi0: bus -1 (PEG1) >> acpiprt12 at acpi0: bus -1 (PEG2) >> acpiprt13 at acpi0: bus -1 (PEG3) >> acpiec0 at acpi0Store to default type! 8 >> >> 1f45 Called: \_SB_.PCI0.LPCB.EC0_._REG >> arg0: 0xffff8000001ac208 cnt:01 stk:00 integer: 3 >> arg1: 0xffff8000001ac188 cnt:02 stk:00 integer: 1 >> 1f74 Called: \_SB_.PCI0.LPCB.EC0_._REG >> arg0: 0xffff8000001ac208 cnt:01 stk:00 integer: 3 >> arg1: 0xffff8000001ac188 cnt:02 stk:00 integer: 1 >> panic: aml_die aml_store:2584 >> Stopped at Debugger+0x5: leave >> Debugger() at Debugger+0x5 >> panic() at panic+0xe4 >> _aml_die() at _aml_die+0x183 >> aml_store() at aml_store+0xbb >> aml_parse() at aml_parse+0xcd7 >> aml_eval() at aml_eval+0x1c8 >> aml_evalnode() at aml_evalnode+0x63 >> acpiec_reg() at acpiec_reg+0x77 >> acpiec_attach() at acpiec_attach+0x41 >> config_attach() at config_attach+0x1d4 >> end trace frame: 0xffffffff80e4aa00, count: 0 >> RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC! >> IF RUNNING SMP, USE 'mach ddbcpu <#>' AND 'trace' ON OTHER PROCESSORS, TOO. >> DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION! >> >> Trace output: >> >> Debugger() at Debugger+0x5 >> panic() at panic+0xe4 >> _aml_die() at _aml_die+0x183 >> aml_store() at aml_store+0xbb >> aml_parse() at aml_parse+0xcd7 >> aml_eval() at aml_eval+0x1c8 >> aml_evalnode() at aml_evalnode+0x63 >> acpiec_reg() at acpiec_reg+0x77 >> acpiec_attach() at acpiec_attach+0x41 >> config_attach() at config_attach+0x1d4 >> acpi_foundec() at acpi_foundec+0xce >> aml_find_node() at aml_find_node+0x92 >> aml_find_node() at aml_find_node+0x87 >> aml_find_node() at aml_find_node+0x87 >> aml_find_node() at aml_find_node+0x87 >> aml_find_node() at aml_find_node+0x87 >> aml_find_node() at aml_find_node+0x87 >> acpi_attach() at acppi_attach+0x4f0 >> config_attach() at config_attach+0x1d4 >> bios_attach() at bios_attach+0x218 >> config_attach() at config_attach+0x1d4 >> mainbus_attach() at mainbus_attach+0x53 >> config_attach() at config_attach+0x1d4 >> cpu_configure() at cpu_configure+0x17 >> main() at main+0x3f5 >> end trace frame: 0x0, count: -25 >> >> Ps output: >> >> PID PPID PGRP UID S FLAGS WAIT COMMAND >> * 0 -1 0 0 7 0X200 swapper >> >> >> I thought that this could be a -current problem so downloaded >> 5.1-release(x86_64), >> which presented only minor diferences. >> >> >> upon booting installer kernel : >> >> uhub0: device problem, disabling port 1 >> >> then after install: >> >> dmesg: >> >> OpenBSD 5.1 (GENERIC.MP) #207: Sun Feb 12 09:42:14 MST 2012 >> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP >> real mem = 4138987520 (3947MB) >> avail mem = 4014641152 (3828MB) >> mainbus0 at root >> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe65a0 (52 entries) >> bios0: vendor Acer version "V1.20" date 03/16/2012 >> bios0: Acer Aspire 5750 >> acpi0 at bios0: rev 2 >> acpi0: sleep states S0 S3 S4 S5 >> acpi0: tables DSDT FACP ASF! HPET APIC MCFG SLIC SSDT BOOT ASPT SSDT SSDT >> acpi0: wakeup devices POP1(S4) GLAN(S0) EHC1(S3) HDEF(S0) PXSX(S4) RP01(S4) >> PXS >> X(S4) PXSX(S4) PXSX(S4) RP04(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) >> PEG0(S4) >> P >> EGP(S4) PEG1(S4) PEG2(S4) PEG3(S4) >> acpitimer0 at acpi0: 3579545 Hz, 24 bits >> acpihpet0 at acpi0: 14318179 Hz >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >> cpu0 at mainbus0: apid 0 (boot processor) >> cpu0: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2295.15 MHz >> cpu0: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C >> FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES >> T, >> TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF >> cpu0: 256KB 64b/line 8-way L2 cache >> cpu0: apic clock running at 99 MHz >> cpu1 at mainbus0: apid 1 (application processor) >> cpu1: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2294.79 MHz >> cpu1: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C >> FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES >> T, >> TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF >> cpu1: 256KB 64b/line 8-way L2 cache >> cpu2 at mainbus0: apid 2 (application processor) >> cpu2: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2294.79 MHz >> cpu2: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C >> FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES >> T, >> TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF >> cpu2: 256KB 64b/line 8-way L2 cache >> cpu3 at mainbus0: apid 3 (application processor) >> cpu3: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2294.79 MHz >> cpu3: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C >> FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,ES >> T, >> TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX,NXE,LONG,LAHF >> cpu3: 256KB 64b/line 8-way L2 cache >> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins >> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 >> acpiprt0 at acpi0: bus 0 (PCI0) >> acpiprt1 at acpi0: bus -1 (POP1) >> acpiprt2 at acpi0: bus 2 (RP01) >> acpiprt3 at acpi0: bus 3 (RP02) >> acpiprt4 at acpi0: bus -1 (RP03) >> acpiprt5 at acpi0: bus -1 (RP04) >> acpiprt6 at acpi0: bus -1 (RP05) >> acpiprt7 at acpi0: bus -1 (RP06) >> acpiprt8 at acpi0: bus -1 (RP07) >> acpiprt9 at acpi0: bus -1 (RP08) >> acpiprt10 at acpi0: bus -1 (PEG0) >> acpiprt11 at acpi0: bus -1 (PEG1) >> acpiprt12 at acpi0: bus -1 (PEG2) >> acpiprt13 at acpi0: bus -1 (PEG3) >> acpiec0 at acpi0Store to default type! 8 >> >> 1f45 Called: \_SB_.PCI0.LPCB.EC0_._REG >> arg0: 0xffff8000001ac208 cnt:01 stk:00 integer: 3 >> arg1: 0xffff8000001ac188 cnt:02 stk:00 integer: 1 >> 1f74 Called: \_SB_.PCI0.LPCB.EC0_._REG >> arg0: 0xffff8000001ac208 cnt:01 stk:00 integer: 3 >> arg1: 0xffff8000001ac188 cnt:02 stk:00 integer: 1 >> panic: aml_die aml_store:2584 >> Stopped at Debugger+0x5: leave >> Debugger() at Debugger+0x5 >> panic() at panic+0xe4 >> _aml_die() at _aml_die+0x183 >> aml_store() at aml_store+0xbb >> aml_parse() at aml_parse+0xcd7 >> aml_eval() at aml_eval+0x1c8 >> aml_evalnode() at aml_evalnode+0x63 >> acpiec_reg() at acpiec_reg+0x6a >> acpiec_attach() at acpiec_attach+0x41 >> config_attach() at config_attach+0x1d4 >> end trace frame: 0xffffffff80e3ba00, count: 0 >> RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC! >> IF RUNNING SMP, USE 'mach ddbcpu <#>' AND 'trace' ON OTHER PROCESSORS, TOO. >> DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION! >> >> Trace output: >> >> Debugger() at Debugger+0x5 >> panic() at panic+0xe4 >> _aml_die() at _aml_die+0x183 >> aml_store() at aml_store+0xbb >> aml_parse() at aml_parse+0xcd7 >> aml_eval() at aml_eval+0x1c8 >> aml_evalnode() at aml_evalnode+0x63 >> acpiec_reg() at acpiec_reg+0x6a >> acpiec_attach() at acpiec_attach+0x41 >> config_attach() at config_attach+0x1d4 >> acpi_foundec() at acpi_foundec+0xce >> aml_find_node() at aml_find_node+0x92 >> aml_find_node() at aml_find_node+0x87 >> aml_find_node() at aml_find_node+0x87 >> aml_find_node() at aml_find_node+0x87 >> aml_find_node() at aml_find_node+0x87 >> aml_find_node() at aml_find_node+0x87 >> acpi_attach() at acppi_attach+0x4f0 >> config_attach() at config_attach+0x1d4 >> bios_attach() at bios_attach+0x218 >> config_attach() at config_attach+0x1d4 >> mainbus_attach() at mainbus_attach+0x53 >> config_attach() at config_attach+0x1d4 >> cpu_configure() at cpu_configure+0x17 >> main() at main+0x405 >> end trace frame: 0x0, count: -25 >> >> Ps output: >> >> PID PPID PGRP UID S FLAGS WAIT COMMAND >> * 0 -1 0 0 7 0X200 swapper >> >> >> I'm available for reply but please note that i'm not a coder. >> >> Thaks for your time & best regards >> Adalberto > -- Brightest day, Blackest night, No bug shall escape my sight, And those who worship evil's mind, be wary of my powers, puffy lantern's light !
