Hi,
with current snapshot (i386) the DVI output of the docking station of
my Fujitsu Lifebook T4215 is not detected anymore. Under Linux (Debian
kernel 3.2) it's detected as DVI1. With older OpenBSD versions it was
detected as TMDS-1.
VGA on the docking station works fine as well as directly attached to the
laptop. In contrast to VGA, there is no DVI output at the laptop, only at the
docking station.
Cheers,
Ralf
xrandr:
Screen 0: minimum 320 x 200, current 1920 x 1200, maximum 4096 x 4096
LVDS1 connected (normal left inverted right x axis y axis)
1024x768 60.0 + 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x
324mm
1920x1200 60.0*+
1920x1080 60.0
1600x1200 60.0
1680x1050 60.0
1280x1024 60.0
1280x960 60.0
1024x768 60.0
800x600 60.3
640x480 60.0
720x400 70.1
TV1 unknown connection (normal left inverted right x axis y axis)
848x480 59.9 +
640x480 59.9 +
1024x768 59.9
800x600 59.9
demsg:
OpenBSD 5.3-current (GENERIC) #79: Wed Mar 27 01:16:18 MDT 2013
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
real mem = 2136797184 (2037MB)
avail mem = 2090475520 (1993MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/07/07, BIOS32 rev. 0 @ 0xfdbf4, SMBIOS
rev. 2.4 @ 0xe5550 (53 entries)
bios0: vendor FUJITSU // Phoenix Technologies Ltd. version "Version 1.14" date
05/07/2007
bios0: FUJITSU SIEMENS LIFEBOOK T4215
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT MCFG SSDT SSDT APIC HPET BOOT SLIC
acpi0: wakeup devices PCIB(S4) MODM(S3) HDEF(S3) PXS1(S4) PXS2(S4) LID_(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 8 (PCIB)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 3 (RP02)
acpiprt4 at acpi0: bus 5 (RP03)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 100 degC
acpitz1 at acpi0: critical temperature is 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWRB
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: CMB1 model "CP293420" serial 1 type LION oem "Fujitsu"
acpibat1 at acpi0: CMB2 not present
acpibtn2 at acpi0: SLPB
acpidock0 at acpi0: REPL docked (15)
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: LCD_
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000 0xd0200/0x1000 0xdc000/0x1c00!
cpu0: Enhanced SpeedStep 1996 MHz: speeds: 2000, 1667, 1333, 1000 MHz
memory map conflict 0xfed00000/0x400
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: apic 2 int 16
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Sigmatel STAC9228X
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 22
pci1 at ppb0 bus 2
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8055" rev 0x12, Yukon-2 EC
Ultra rev. A1 (0x2): apic 2 int 16
msk0 at mskc0 port A: address 00:17:42:41:a8:2d
eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 21
pci2 at ppb1 bus 3
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 2 int 20
pci3 at ppb2 bus 5
5:0:0: mem address conflict 0xf0100000/0x1000
wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, MoW2,
address 00:1b:77:72:01:7c
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 20
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 8
cbb0 at pci4 dev 3 function 0 "O2 Micro OZ711MP1 CardBus" rev 0x20: apic 2 int
16
cbb1 at pci4 dev 3 function 1 "O2 Micro OZ711MP1 CardBus" rev 0x20: apic 2 int
16, CardBus support disabled
sdhc0 at pci4 dev 3 function 2 "O2 Micro OZ711MP1 SDHC" rev 0x00: apic 2 int 16
sdmmc0 at sdhc0
"O2 Micro OZ711MP1 XDHC" rev 0x00 at pci4 dev 3 function 3 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 9 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-841S, 1.31> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1
ahci0: PHY offline on port 2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, INTEL SSDSC2MH12, PPG4> SCSI3 0/direct
fixed naa.01507a51e26b8cdf
sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 19
iic0 at ichiic0
iic0: addr 0x19 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00 09=00
0a=00 0b=00 0c=00 0d=00 0e=00 0f=00 10=00 11=20 24=00 b9=00 ba=00 words 00=0000
01=0000 02=0000 03=0000 04=0040 05=0000 06=0000 07=0000
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
"O2Micro, SmartCardBus Reader, V1.0" at pcmcia1 function 0 not configured
uhub5 at uhub0 port 4 "NEC Corporation USB2.0 Hub Controller" rev 2.00/1.00
addr 2
uplcom0 at uhub5 port 2 "Prolific Technology PL2303 Serial" rev 1.10/2.02 addr 3
ucom0 at uplcom0
uhub6 at uhub5 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 addr
4
uhub7 at uhub6 port 2 "GENESYS USB 2.0 HUB" rev 2.00/77.60 addr 5
uhidev0 at uhub7 port 1 configuration 1 interface 0 "Logitech Optical USB
Mouse" rev 2.00/3.40 addr 6
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub7 port 3 configuration 1 interface 0 "Alcor Micro product
0x3108" rev 1.10/3.01 addr 7
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub7 port 3 configuration 1 interface 1 "Alcor Micro product
0x3108" rev 1.10/3.01 addr 7
uhidev2: iclass 3/0, 2 report ids
uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
uaudio0 at uhub7 port 4 configuration 1 interface 0 "C-Media Electronics Inc.
USB Multimedia Audio Device" rev 1.10/1.00 addr 8
uaudio0: audio rev 1.00, 8 mixer controls
audio1 at uaudio0
uhidev3 at uhub7 port 4 configuration 1 interface 3 "C-Media Electronics Inc.
USB Multimedia Audio Device" rev 1.10/1.00 addr 8
uhidev3: iclass 3/0
uhid2 at uhidev3: input=16, output=16, feature=0
ugen0 at uhub3 port 1 "vendor 0x0c24 product 0x000f" rev 2.00/19.15 addr 2
ugen1 at uhub3 port 2 "AuthenTec Fingerprint Sensor" rev 1.10/6.21 addr 3
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (3e4d92862aa71140.a) swap on sd0b dump on sd0b
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd1: 80821MB, 512 bytes/sector, 165522270 sectors
Xorg.0.log:
[ 43.287] (--) checkDevMem: using aperture driver /dev/xf86
[ 43.302] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode
(version 3.32)
[ 43.318]
X.Org X Server 1.12.3
Release Date: 2012-07-09
[ 43.318] X Protocol Version 11, Revision 0
[ 43.318] Build Operating System: OpenBSD 5.3 i386
[ 43.318] Current Operating System: OpenBSD adams.internal 5.3 GENERIC#79
i386
[ 43.318] Build Date: 26 March 2013 07:26:19PM
[ 43.318]
[ 43.318] Current version of pixman: 0.28.0
[ 43.318] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 43.318] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 43.319] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 28 09:11:22
2013
[ 43.325] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 43.328] (==) No Layout section. Using the first Screen section.
[ 43.329] (==) No screen section available. Using defaults.
[ 43.329] (**) |-->Screen "Default Screen Section" (0)
[ 43.329] (**) | |-->Monitor "<default monitor>"
[ 43.331] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 43.331] (==) Disabling SIGIO handlers for input devices
[ 43.331] (==) Automatically adding devices
[ 43.331] (==) Automatically enabling devices
[ 43.352] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 43.352] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 43.352] (II) The server relies on wscons to provide the list of input
devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 43.353] (II) Loader magic: 0x3c022040
[ 43.353] (II) Module ABI versions:
[ 43.353] X.Org ANSI C Emulation: 0.4
[ 43.353] X.Org Video Driver: 12.0
[ 43.353] X.Org XInput driver : 16.0
[ 43.353] X.Org Server Extension : 6.0
[ 43.354] (--) PCI:*(0:0:2:0) 8086:27a2:10cf:1380 rev 3, Mem @
0xf0300000/524288, 0xe0000000/268435456, 0xf0400000/262144, I/O @ 0x00001800/8
[ 43.354] (--) PCI: (0:0:2:1) 8086:27a6:10cf:1380 rev 3, Mem @
0xf0380000/524288
[ 43.354] (II) LoadModule: "extmod"
[ 43.361] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[ 43.363] (II) Module extmod: vendor="X.Org Foundation"
[ 43.363] compiled for 1.12.3, module version = 1.0.0
[ 43.363] Module class: X.Org Server Extension
[ 43.363] ABI class: X.Org Server Extension, version 6.0
[ 43.363] (II) Loading extension MIT-SCREEN-SAVER
[ 43.363] (II) Loading extension XFree86-VidModeExtension
[ 43.363] (II) Loading extension XFree86-DGA
[ 43.364] (II) Loading extension DPMS
[ 43.364] (II) Loading extension XVideo
[ 43.366] (II) Loading extension XVideo-MotionCompensation
[ 43.366] (II) Loading extension X-Resource
[ 43.366] (II) LoadModule: "dbe"
[ 43.367] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[ 43.369] (II) Module dbe: vendor="X.Org Foundation"
[ 43.369] compiled for 1.12.3, module version = 1.0.0
[ 43.369] Module class: X.Org Server Extension
[ 43.369] ABI class: X.Org Server Extension, version 6.0
[ 43.369] (II) Loading extension DOUBLE-BUFFER
[ 43.369] (II) LoadModule: "glx"
[ 43.370] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 43.376] (II) Module glx: vendor="X.Org Foundation"
[ 43.376] compiled for 1.12.3, module version = 1.0.0
[ 43.376] ABI class: X.Org Server Extension, version 6.0
[ 43.377] (==) AIGLX enabled
[ 43.377] (II) Loading extension GLX
[ 43.377] (II) LoadModule: "record"
[ 43.378] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[ 43.379] (II) Module record: vendor="X.Org Foundation"
[ 43.380] compiled for 1.12.3, module version = 1.13.0
[ 43.380] Module class: X.Org Server Extension
[ 43.380] ABI class: X.Org Server Extension, version 6.0
[ 43.380] (II) Loading extension RECORD
[ 43.380] (II) LoadModule: "dri"
[ 43.380] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[ 43.384] (II) Module dri: vendor="X.Org Foundation"
[ 43.384] compiled for 1.12.3, module version = 1.0.0
[ 43.384] ABI class: X.Org Server Extension, version 6.0
[ 43.385] (II) Loading extension XFree86-DRI
[ 43.386] (II) LoadModule: "dri2"
[ 43.386] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[ 43.388] (II) Module dri2: vendor="X.Org Foundation"
[ 43.388] compiled for 1.12.3, module version = 1.2.0
[ 43.388] ABI class: X.Org Server Extension, version 6.0
[ 43.388] (II) Loading extension DRI2
[ 43.388] (==) Matched intel as autoconfigured driver 0
[ 43.388] (==) Matched vesa as autoconfigured driver 1
[ 43.388] (==) Assigned the driver to the xf86ConfigLayout
[ 43.388] (II) LoadModule: "intel"
[ 43.389] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[ 43.398] (II) Module intel: vendor="X.Org Foundation"
[ 43.398] compiled for 1.12.3, module version = 2.20.19
[ 43.398] Module class: X.Org Video Driver
[ 43.398] ABI class: X.Org Video Driver, version 12.0
[ 43.399] (II) LoadModule: "vesa"
[ 43.400] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[ 43.401] (II) Module vesa: vendor="X.Org Foundation"
[ 43.401] compiled for 1.12.3, module version = 2.3.2
[ 43.401] Module class: X.Org Video Driver
[ 43.401] ABI class: X.Org Video Driver, version 12.0
[ 43.401] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 43.402] (II) VESA: driver for VESA chipsets: vesa
[ 43.402] drmOpenDevice: node name is /dev/drm0
[ 43.402] drmOpenDevice: open result is 10, (OK)
[ 43.402] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 43.402] drmOpenDevice: node name is /dev/drm0
[ 43.402] drmOpenDevice: open result is 10, (OK)
[ 43.402] drmOpenByBusid: drmOpenMinor returns 10
[ 43.402] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 43.402] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 43.403] drmOpenDevice: node name is /dev/drm0
[ 43.403] drmOpenDevice: open result is 10, (OK)
[ 43.403] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 43.403] drmOpenDevice: node name is /dev/drm0
[ 43.403] drmOpenDevice: open result is 10, (OK)
[ 43.403] drmOpenByBusid: drmOpenMinor returns 10
[ 43.403] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 43.403] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 43.403] (WW) Falling back to old probe method for vesa
[ 43.403] drmOpenDevice: node name is /dev/drm0
[ 43.403] drmOpenDevice: open result is 10, (OK)
[ 43.403] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 43.403] drmOpenDevice: node name is /dev/drm0
[ 43.403] drmOpenDevice: open result is 10, (OK)
[ 43.403] drmOpenByBusid: drmOpenMinor returns 10
[ 43.403] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 43.403] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 43.403] (II) intel(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 43.403] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 43.403] (==) intel(0): RGB weight 888
[ 43.403] (==) intel(0): Default visual is TrueColor
[ 43.404] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[ 43.406] (**) intel(0): Relaxed fencing disabled
[ 43.406] (**) intel(0): Wait on SwapBuffers? enabled
[ 43.406] (**) intel(0): Triple buffering? enabled
[ 43.406] (**) intel(0): Framebuffer tiled
[ 43.406] (**) intel(0): Pixmaps tiled
[ 43.406] (**) intel(0): 3D buffers tiled
[ 43.406] (**) intel(0): SwapBuffers wait enabled
[ 43.406] (==) intel(0): video overlay key set to 0x101fe
[ 43.408] (II) intel(0): Output LVDS1 has no monitor section
[ 43.429] (II) intel(0): Output VGA1 has no monitor section
[ 43.429] (II) intel(0): Output TV1 has no monitor section
[ 43.429] (II) intel(0): EDID for output LVDS1
[ 43.432] (II) intel(0): Not using default mode "320x240" (doublescan mode
not supported)
[ 43.432] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[ 43.432] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[ 43.432] (II) intel(0): Not using default mode "512x384" (doublescan mode
not supported)
[ 43.432] (II) intel(0): Not using default mode "640x480" (doublescan mode
not supported)
[ 43.432] (II) intel(0): Not using default mode "640x512" (doublescan mode
not supported)
[ 43.432] (II) intel(0): Not using default mode "800x600" (doublescan mode
not supported)
[ 43.432] (II) intel(0): Not using default mode "896x672" (doublescan mode
not supported)
[ 43.432] (II) intel(0): Not using default mode "928x696" (doublescan mode
not supported)
[ 43.432] (II) intel(0): Not using default mode "960x720" (doublescan mode
not supported)
[ 43.432] (II) intel(0): Not using default mode "700x525" (doublescan mode
not supported)
[ 43.432] (II) intel(0): Printing probed modes for output LVDS1
[ 43.432] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1248 768 771 777 868 -hsync -vsync (52.1 kHz P)
[ 43.432] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 43.432] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 43.432] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 43.432] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 43.463] (II) intel(0): EDID for output VGA1
[ 43.463] (II) intel(0): Manufacturer: DEL Model: a079 Serial#: 808859724
[ 43.463] (II) intel(0): Year: 2012 Week: 12
[ 43.463] (II) intel(0): EDID Version: 1.3
[ 43.463] (II) intel(0): Analog Display Input, Input Voltage Level:
0.700/0.300 V
[ 43.463] (II) intel(0): Sync: Separate Composite SyncOnGreen
[ 43.463] (II) intel(0): Max Image Size [cm]: horiz.: 52 vert.: 32
[ 43.463] (II) intel(0): Gamma: 2.20
[ 43.463] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color
Display
[ 43.463] (II) intel(0): First detailed timing is preferred mode
[ 43.463] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY:
0.600
[ 43.463] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY:
0.329
[ 43.463] (II) intel(0): Supported established timings:
[ 43.463] (II) intel(0): 720x400@70Hz
[ 43.463] (II) intel(0): 640x480@60Hz
[ 43.463] (II) intel(0): 800x600@60Hz
[ 43.463] (II) intel(0): 1024x768@60Hz
[ 43.463] (II) intel(0): Manufacturer's mask: 0
[ 43.463] (II) intel(0): Supported standard timings:
[ 43.463] (II) intel(0): #0: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 43.463] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 43.463] (II) intel(0): #2: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 43.463] (II) intel(0): #3: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 43.463] (II) intel(0): #4: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 43.463] (II) intel(0): Supported detailed timing:
[ 43.463] (II) intel(0): clock: 154.0 MHz Image Size: 518 x 324 mm
[ 43.463] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000
h_blank_end 2080 h_border: 0
[ 43.463] (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209
v_blanking: 1235 v_border: 0
[ 43.463] (II) intel(0): Serial No: 19K7323L068L
[ 43.463] (II) intel(0): Monitor name: DELL U2412M
[ 43.463] (II) intel(0): Ranges: V min: 50 V max: 61 Hz, H min: 30 H max: 83
kHz, PixClock max 175 MHz
[ 43.463] (II) intel(0): EDID (in hex):
[ 43.463] (II) intel(0): 00ffffffffffff0010ac79a04c383630
[ 43.463] (II) intel(0): 0c1601030e342078eaee95a3544c9926
[ 43.463] (II) intel(0): 0f5054a1080081408180a940b300d1c0
[ 43.463] (II) intel(0): 010101010101283c80a070b023403020
[ 43.463] (II) intel(0): 360006442100001a000000ff0031394b
[ 43.463] (II) intel(0): 373332334c3036384c0a000000fc0044
[ 43.463] (II) intel(0): 454c4c2055323431324d0a20000000fd
[ 43.463] (II) intel(0): 00323d1e5311000a2020202020200028
[ 43.463] (II) intel(0): Printing probed modes for output VGA1
[ 43.463] (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000
2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 43.463] (II) intel(0): Modeline "1920x1080"x60.0 172.78 1920 2040 2248
2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 43.463] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856
2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 43.463] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960
2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 43.463] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 43.463] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488
1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 43.463] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 43.463] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 43.463] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 43.463] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 43.463] (II) intel(0): EDID for output TV1
[ 43.463] (II) intel(0): Printing probed modes for output TV1
[ 43.463] (II) intel(0): Modeline "848x480"x59.9 29.03 848 849 912 944
480 481 512 513 (30.7 kHz eP)
[ 43.463] (II) intel(0): Modeline "640x480"x59.9 22.63 640 641 704 736
480 481 512 513 (30.7 kHz eP)
[ 43.463] (II) intel(0): Modeline "1024x768"x59.9 53.77 1024 1025 1088
1120 768 769 800 801 (48.0 kHz e)
[ 43.463] (II) intel(0): Modeline "800x600"x59.9 34.00 800 801 864 896
600 601 632 633 (37.9 kHz e)
[ 43.463] (II) intel(0): Output LVDS1 connected
[ 43.463] (II) intel(0): Output VGA1 connected
[ 43.463] (II) intel(0): Output TV1 disconnected
[ 43.463] (II) intel(0): Using exact sizes for initial modes
[ 43.463] (II) intel(0): Output LVDS1 using initial mode 1024x768
[ 43.463] (II) intel(0): Output VGA1 using initial mode 1024x768
[ 43.464] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 43.464] (II) intel(0): Kernel page flipping support detected, enabling
[ 43.464] (==) intel(0): DPI set to (96, 96)
[ 43.464] (II) Loading sub module "fb"
[ 43.464] (II) LoadModule: "fb"
[ 43.467] (II) Loading /usr/X11R6/lib/modules/libfb.so
[ 43.470] (II) Module fb: vendor="X.Org Foundation"
[ 43.470] compiled for 1.12.3, module version = 1.0.0
[ 43.470] ABI class: X.Org ANSI C Emulation, version 0.4
[ 43.470] (II) Loading sub module "dri2"
[ 43.470] (II) LoadModule: "dri2"
[ 43.470] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[ 43.470] (II) Module dri2: vendor="X.Org Foundation"
[ 43.470] compiled for 1.12.3, module version = 1.2.0
[ 43.470] ABI class: X.Org Server Extension, version 6.0
[ 43.471] (II) UnloadModule: "vesa"
[ 43.471] (II) Unloading vesa
[ 43.471] (==) Depth 24 pixmap format is 32 bpp
[ 43.472] (II) intel(0): [DRI2] Setup complete
[ 43.472] (II) intel(0): [DRI2] DRI driver: i915
[ 43.472] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096,
tiled
[ 43.479] (II) UXA(0): Driver registered support for the following
operations:
[ 43.479] (II) solid
[ 43.479] (II) copy
[ 43.479] (II) composite (RENDER acceleration)
[ 43.479] (II) put_image
[ 43.479] (II) get_image
[ 43.479] (==) intel(0): Backing store disabled
[ 43.479] (==) intel(0): Silken mouse disabled
[ 43.482] (II) intel(0): Initializing HW Cursor
[ 43.483] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 43.489] (==) intel(0): DPMS enabled
[ 43.489] (==) intel(0): Intel XvMC decoder disabled
[ 43.489] (II) intel(0): Set up textured video
[ 43.489] (II) intel(0): Set up overlay video
[ 43.491] (II) intel(0): direct rendering: DRI2 Enabled
[ 43.587] (--) RandR disabled
[ 43.588] (II) Initializing built-in extension Generic Event Extension
[ 43.588] (II) Initializing built-in extension SHAPE
[ 43.588] (II) Initializing built-in extension MIT-SHM
[ 43.588] (II) Initializing built-in extension XInputExtension
[ 43.588] (II) Initializing built-in extension XTEST
[ 43.588] (II) Initializing built-in extension BIG-REQUESTS
[ 43.588] (II) Initializing built-in extension SYNC
[ 43.588] (II) Initializing built-in extension XKEYBOARD
[ 43.588] (II) Initializing built-in extension XC-MISC
[ 43.588] (II) Initializing built-in extension SECURITY
[ 43.588] (II) Initializing built-in extension XINERAMA
[ 43.588] (II) Initializing built-in extension XFIXES
[ 43.588] (II) Initializing built-in extension RENDER
[ 43.588] (II) Initializing built-in extension RANDR
[ 43.588] (II) Initializing built-in extension COMPOSITE
[ 43.588] (II) Initializing built-in extension DAMAGE
[ 43.665] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 43.665] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 43.665] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 43.665] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 43.665] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 43.665] (II) AIGLX: Loaded and initialized i915
[ 43.665] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 43.668] (II) intel(0): Setting screen physical size to 270 x 203
[ 43.965] (II) config/wscons: checking input device /dev/wskbd
[ 43.965] (II) wskbd: using layout de
[ 43.965] (II) LoadModule: "kbd"
[ 43.966] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 43.968] (II) Module kbd: vendor="X.Org Foundation"
[ 43.968] compiled for 1.12.3, module version = 1.6.2
[ 43.968] Module class: X.Org XInput Driver
[ 43.968] ABI class: X.Org XInput driver, version 16.0
[ 43.968] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 43.968] (**) /dev/wskbd: always reports core events
[ 43.968] (**) /dev/wskbd: always reports core events
[ 43.968] (**) Option "Protocol" "standard"
[ 43.968] (**) Option "XkbRules" "base"
[ 43.968] (**) Option "XkbModel" "pc105"
[ 43.968] (**) Option "XkbLayout" "de"
[ 43.969] (II) XINPUT: Adding extended input device "/dev/wskbd" (type:
KEYBOARD, id 6)
[ 44.423] (II) config/wscons: checking input device /dev/wsmouse0
[ 44.423] (II) LoadModule: "synaptics"
[ 44.425] (II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.so
[ 44.430] (II) Module synaptics: vendor="X.Org Foundation"
[ 44.430] compiled for 1.12.3, module version = 1.6.2
[ 44.430] Module class: X.Org XInput Driver
[ 44.430] ABI class: X.Org XInput driver, version 16.0
[ 44.430] (II) Using input driver 'synaptics' for '/dev/wsmouse0'
[ 44.430] (**) /dev/wsmouse0: always reports core events
[ 44.430] (**) Option "Device" "/dev/wsmouse0"
[ 45.287] (--) synaptics: /dev/wsmouse0: x-axis range 1472 - 5472 resolution
69
[ 45.287] (--) synaptics: /dev/wsmouse0: y-axis range 1408 - 4448 resolution
99
[ 45.287] (**) /dev/wsmouse0: always reports core events
[ 45.287] (II) XINPUT: Adding extended input device "/dev/wsmouse0" (type:
TOUCHPAD, id 7)
[ 45.289] (**) synaptics: /dev/wsmouse0: (accel) MinSpeed is now constant
deceleration 2.5
[ 45.289] (**) synaptics: /dev/wsmouse0: MaxSpeed is now 1.75
[ 45.289] (**) synaptics: /dev/wsmouse0: AccelFactor is now 0.040
[ 45.289] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[ 45.289] (**) /dev/wsmouse0: (accel) acceleration profile 1
[ 45.290] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[ 45.290] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[ 45.717] (II) config/wscons: checking input device /dev/wsmouse
[ 45.717] (II) LoadModule: "ws"
[ 45.719] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 45.723] (II) Module ws: vendor="X.Org Foundation"
[ 45.723] compiled for 1.12.3, module version = 1.3.0
[ 45.723] Module class: X.Org XInput Driver
[ 45.723] ABI class: X.Org XInput driver, version 16.0
[ 45.723] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 45.723] (**) /dev/wsmouse: always reports core events
[ 45.723] (II) ws: /dev/wsmouse: debuglevel 0
[ 45.723] (**) Option "Device" "/dev/wsmouse"
[ 45.723] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 45.723] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 45.723] (**) ws: /dev/wsmouse: associated screen: 0
[ 45.723] (II) ws: /dev/wsmouse: minimum x position: 0
[ 45.723] (II) ws: /dev/wsmouse: maximum x position: 1023
[ 45.723] (II) ws: /dev/wsmouse: minimum y position: 0
[ 45.723] (II) ws: /dev/wsmouse: maximum y position: 767
[ 45.723] (==) ws: /dev/wsmouse: Buttons: 7
[ 45.723] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 45.723] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type:
MOUSE, id 8)
[ 45.724] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 45.724] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 45.724] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 45.724] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 86.887] (II) intel(0): Allocated new frame buffer 1920x1200 stride 8192,
tiled
[ 524.507] (II) intel(0): EDID vendor "DEL", prod id 41081
[ 524.508] (II) intel(0): Using EDID range info for horizontal sync
[ 524.508] (II) intel(0): Using EDID range info for vertical refresh
[ 524.508] (II) intel(0): Printing DDC gathered Modelines:
[ 524.508] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000
2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 524.508] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 524.508] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 524.508] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 524.508] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 524.509] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488
1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 524.509] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 524.509] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856
2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 524.509] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960
2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 524.509] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248
2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 568.559] (II) intel(0): EDID vendor "DEL", prod id 41081
[ 568.559] (II) intel(0): Using hsync ranges from config file
[ 568.559] (II) intel(0): Using vrefresh ranges from config file
[ 568.559] (II) intel(0): Printing DDC gathered Modelines:
[ 568.559] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000
2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 568.559] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 568.559] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 568.559] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 568.560] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 568.560] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488
1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 568.560] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 568.560] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856
2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 568.560] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960
2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 568.560] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248
2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 568.592] (II) intel(0): EDID vendor "DEL", prod id 41081
[ 568.592] (II) intel(0): Using hsync ranges from config file
[ 568.592] (II) intel(0): Using vrefresh ranges from config file
[ 568.592] (II) intel(0): Printing DDC gathered Modelines:
[ 568.592] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000
2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 568.592] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 568.592] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 568.592] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 568.592] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 568.592] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488
1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 568.592] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 568.592] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856
2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 568.592] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960
2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 568.592] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248
2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 607.041] (II) intel(0): EDID vendor "DEL", prod id 41081
[ 607.041] (II) intel(0): Using hsync ranges from config file
[ 607.041] (II) intel(0): Using vrefresh ranges from config file
[ 607.041] (II) intel(0): Printing DDC gathered Modelines:
[ 607.041] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000
2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 607.041] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 607.041] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 607.041] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 607.041] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 607.041] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488
1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 607.041] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 607.041] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856
2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 607.041] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960
2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 607.041] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248
2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 612.074] (II) intel(0): EDID vendor "DEL", prod id 41081
[ 612.075] (II) intel(0): Using hsync ranges from config file
[ 612.075] (II) intel(0): Using vrefresh ranges from config file
[ 612.075] (II) intel(0): Printing DDC gathered Modelines:
[ 612.075] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000
2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 612.075] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 612.075] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 612.075] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 612.075] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 612.075] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488
1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 612.075] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 612.075] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856
2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 612.075] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960
2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 612.075] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248
2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 625.346] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 626.851] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 675.381] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096,
tiled
[ 801.570] (II) intel(0): Allocated new frame buffer 1920x1200 stride 8192,
tiled
[ 888.966] (II) intel(0): EDID vendor "DEL", prod id 41081
[ 888.966] (II) intel(0): Using hsync ranges from config file
[ 888.966] (II) intel(0): Using vrefresh ranges from config file
[ 888.966] (II) intel(0): Printing DDC gathered Modelines:
[ 888.966] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000
2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 888.966] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 888.966] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 888.966] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 888.966] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 888.966] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488
1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 888.966] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 888.966] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856
2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 888.966] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960
2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 888.966] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248
2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
