On Sun, Mar 31, 2013 at 11:51:55AM +0200, Mark Kettenis wrote:
> > Date: Fri, 29 Mar 2013 15:22:57 +0100
>
> Ralf, Matthieu,
>
> Yesterday I committed some changes that fix some issues in the SDVO
> code. For my setup, whhere HDMI output is provided over SDVO this
> still isn't enough to give me output. For that I need some further
> changes. But I'm interested to see if what's now in -current works
> for you. Could you send me a dmesg from a kernel with DRMDEBUG enabled?
>
Hi Mark,
I've tried with intel_svdo.c 1.6 and the bitbang timing patch, my
system still doesn't work. Below is dmesg with DRMDEBUG defined and
Xorg.0.log.
1(S4) UAR1(S4) PS2K(S4) PS2M(S4) EUSB(S4) USBE(S4) P0P5(S4) P0P6(S4) P0P7(S4)
P0P8(S4) P0P9(S4) USB0(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4) USB5(S4) P0P4(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz ("GenuineIntel" 686-class) 2.14 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus 4 (P0P1)
acpiprt3 at acpi0: bus -1 (P0P5)
acpiprt4 at acpi0: bus -1 (P0P6)
acpiprt5 at acpi0: bus -1 (P0P7)
acpiprt6 at acpi0: bus 2 (P0P8)
acpiprt7 at acpi0: bus 1 (P0P9)
acpiprt8 at acpi0: bus 3 (P0P4)
acpicpu0 at acpi0
acpicpu1 at acpi0
aibs0 at acpi0: RTMP RVLT RFAN GGRP GITM SITM
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xb000! 0xcb000/0x1000 0xcc000/0x3000! 0xcf000/0x800
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82G965 Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82G965 Video" rev 0x02
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0[drm:pid0:drm_agp_init] agp_available = 1
[drm:pid0:drm_ctxbitmap_next] drm_ctxbitmap_next bit : 0
[drm:pid0:drm_ctxbitmap_init] drm_ctxbitmap_init : 0
[drm:pid0:intel_detect_pch] No PCH detected
inteldrm0: apic 2 int 16
[drm:pid0:drm_vblank_init] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm:pid0:drm_vblank_init] Driver supports precise vblank timestamp query.
[drm:pid0:intel_opregion_setup] graphic opregion physical addr: 0x7e79e0e4
[drm:pid0:intel_opregion_setup] Public ACPI methods supported
[drm:pid0:intel_opregion_setup] SWSCI supported
[drm:pid0:intel_opregion_setup] ASLE supported
[drm:pid0:init_vbt_defaults] Set default to SSC at 100MHz
[drm:pid0:intel_parse_bios] Using VBT from OpRegion: $VBT BROADWATER-G d
[drm:pid0:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 1
int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96 display_clock_mode 0
[drm:pid0:parse_general_definitions] crt_ddc_bus_pin: 2
[drm:pid0:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600
1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[drm:pid0:parse_sdvo_device_mapping] No SDVO device info is found in VBT
[drm:pid0:parse_device_mapping] no child dev is parsed from VBT
[drm:pid0:intel_modeset_init] todo set fb base
[drm:pid0:intel_modeset_init] 2 display pipes available.
[drm:pid0:intel_modeset_init] plane 0 init failed: -19
[drm:pid0:intel_modeset_init] plane 1 init failed: -19
[drm:pid0:intel_pch_pll_init] No PCH PLLs on this hardware, skipping
initialisation
[drm:pid0:intel_setup_outputs] probing SDVOB
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 02
(SDVO_CMD_GET_DEVICE_CAPS)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) 04 AA 02 00 01 01 01 00
[drm:pid0:intel_sdvo_get_capabilities] SDVO capabilities:
vendor_id: 4
device_id: 170
device_rev_id: 2
sdvo_version_major: 0
sdvo_version_minor: 1
sdvo_inputs_mask: 1
smooth_scaling: 0
sharp_scaling: 0
up_scaling: 0
down_scaling: 0
stall_support: 0
output_flags: 1
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 0C
(SDVO_CMD_GET_HOT_PLUG_SUPPORT)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 0D 01 00
(SDVO_CMD_SET_ACTIVE_HOT_PLUG)
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 9D
(SDVO_CMD_GET_SUPP_ENCODE)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Not supported)... failed
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 10 00
(SDVO_CMD_SET_TARGET_INPUT)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 1D
(SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) C4 09 74 40
[drm:pid0:intel_sdvo_init] SDVOB device VID/DID: 04:AA.02, clock range 25MHz -
165MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
[drm:pid0:intel_setup_outputs] probing SDVOC
[drm:pid0:intel_sdvo_read_byte] i2c transfer returned 5
[drm:pid0:intel_sdvo_init] No SDVO device found on SDVOC
intel_overlay_map_regs partial stub
[drm:pid0:intel_modeset_setup_hw_state] [CRTC:3] hw state readout: enabled
[drm:pid0:intel_modeset_setup_hw_state] [CRTC:4] hw state readout: enabled
[drm:pid0:intel_modeset_setup_hw_state] [ENCODER:6:DAC-6] hw state readout:
enabled, pipe=0
[drm:pid0:intel_modeset_setup_hw_state] [ENCODER:7:TMDS-7] hw state readout:
enabled, pipe=0
[drm:pid0:intel_modeset_setup_hw_state] [CONNECTOR:5:VGA-1] hw state readout:
enabled
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 04
(SDVO_CMD_GET_ACTIVE_OUTPUTS)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid0:intel_modeset_setup_hw_state] [CONNECTOR:8:DVI-D-1] hw state readout:
enabled
[drm:pid0:drm_calc_vbltimestamp_from_scanoutpos] crtc 1: Noop due to
uninitialized mode.
[drm:pid0:i965_update_wm] Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1
[drm:pid0:intel_sanitize_crtc] [CRTC:4] hw state adjusted, was enabled, now
disabled
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:VGA-1]
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 04
(SDVO_CMD_GET_ACTIVE_OUTPUTS)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid0:intel_connector_check_state] [CONNECTOR:8:DVI-D-1]
[drm:pid0:intel_modeset_check_state] [ENCODER:6:DAC-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:7:TMDS-7]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
[drm:pid0:drm_irq_install] irq=11
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
[drm:pid0:intel_crt_detect] CRT detected via hotplug
[drm:pid0:drm_edid_to_eld] ELD: no CEA Extension found
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1] probed
modes :
[drm:pid0:drm_mode_debug_printmodeline] Modeline 21:"1024x768" 60 65000 1024
1048 1184 1344 768 771 777 806 0x48 0xa
[drm:pid0:drm_mode_debug_printmodeline] Modeline 19:"1024x768" 75 78800 1024
1040 1136 1312 768 769 772 800 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 20:"1024x768" 70 75000 1024
1048 1184 1328 768 771 777 806 0x40 0xa
[drm:pid0:drm_mode_debug_printmodeline] Modeline 22:"832x624" 75 57284 832 864
928 1152 624 625 628 667 0x40 0xa
[drm:pid0:drm_mode_debug_printmodeline] Modeline 24:"800x600" 72 50000 800 856
976 1040 600 637 643 666 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 23:"800x600" 75 49500 800 816
896 1056 600 601 604 625 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 12:"800x600" 60 40000 800 840
968 1056 600 601 605 628 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 13:"800x600" 56 36000 800 824
896 1024 600 601 603 625 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 15:"640x480" 73 31500 640 664
704 832 480 489 491 520 0x40 0xa
[drm:pid0:drm_mode_debug_printmodeline] Modeline 16:"640x480" 67 30240 640 704
768 864 480 483 486 525 0x40 0xa
[drm:pid0:drm_mode_debug_printmodeline] Modeline 17:"640x480" 60 25200 640 656
752 800 480 490 492 525 0x40 0xa
[drm:pid0:drm_mode_debug_printmodeline] Modeline 18:"720x400" 70 28320 720 738
846 900 400 412 414 449 0x40 0x6
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:8:DVI-D-1]
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 0B
(SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid0:intel_sdvo_detect] SDVO response 1 0 [1]
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 7A 02
(SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:8:DVI-D-1]
disconnected
[drm:pid0:drm_setup_crtcs]
[drm:pid0:drm_enable_connectors] connector 5 enabled? yes
[drm:pid0:drm_enable_connectors] connector 8 enabled? no
[drm:pid0:drm_target_preferred] looking for cmdline mode on connector 5
[drm:pid0:drm_pick_cmdline_mode] stub
[drm:pid0:drm_target_preferred] looking for preferred mode on connector 5
[drm:pid0:drm_target_preferred] found mode 1024x768
[drm:pid0:drm_setup_crtcs] picking CRTCs for 8192x8192 config
[drm:pid0:drm_setup_crtcs] desired mode 1024x768 set on crtc 3
[drm:pid0:intelfb_create] allocated 1024x768 fb: 0x007a0000, bo 0xd8f370ac
[drm:pid0:intelfb_create] skipping call to vga_switcheroo_client_fb_set
[drm:pid0:intel_crtc_set_config] [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
[drm:pid0:intel_set_config_compute_mode_changes] crtc has no fb, full mode set
[drm:pid0:intel_set_config_compute_mode_changes] modes are different, full mode
set
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0
0x0
[drm:pid0:drm_mode_debug_printmodeline] Modeline 25:"1024x768" 60 65000 1024
1048 1184 1344 768 771 777 806 0x48 0xa
[drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:8:DVI-D-1] to [NOCRTC]
[drm:pid0:intel_modeset_stage_output_state] encoder changed, full mode switch
[drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid0:intel_modeset_stage_output_state] crtc changed, full mode switch
[drm:pid0:intel_crtc_set_config] attempting to set mode from userspace
[drm:pid0:drm_mode_debug_printmodeline] Modeline 25:"1024x768" 60 65000 1024
1048 1184 1344 768 771 777 806 0x48 0xa
[drm:pid0:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[drm:pid0:intel_modeset_adjusted_mode] [CRTC:3]
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 05 00 00
(SDVO_CMD_SET_ACTIVE_OUTPUTS)
[drm:pid0:intel_sdvo_write_cmd] sdvo i2c transfer failed
[drm:pid0:drm_calc_vbltimestamp_from_scanoutpos] crtc 0: Noop due to
uninitialized mode.
[drm:pid0:i965_update_wm] Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1
[drm:pid0:i9xx_crtc_mode_set] Mode for pipe A:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 25:"1024x768" 60 65000 1024
1048 1184 1344 768 771 777 806 0x48 0xa
[drm:pid0:i9xx_update_plane] Writing base 007A0000 00000000 0 0 4096
[drm:pid0:i965_update_wm] Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1
[drm:pid0:intel_crtc_mode_set] [ENCODER:6:DAC-6] set [MODE:25:1024x768]
[drm:pid0:i965_update_wm] self-refresh entries: 64, wm: 448
[drm:pid0:i965_update_wm] self-refresh watermark: display plane 448 cursor 32
[drm:pid0:i965_update_wm] Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 448
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:VGA-1]
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 04
(SDVO_CMD_GET_ACTIVE_OUTPUTS)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid0:intel_connector_check_state] [CONNECTOR:8:DVI-D-1]
active connector not linked to encoder
encoder->connectors_active not set
encoder not enabled
WARNING !encoder->base.crtc failed at
/local/OpenBSD/src/sys/dev/pci/drm/i915/intel_display.c:4414
[drm:pid0:intel_modeset_check_state] [ENCODER:6:DAC-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:7:TMDS-7]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
[drm:pid0:intel_crtc_set_config] [CRTC:4] [NOFB]
[drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82G965 Video" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 17
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: msi
azalia0: codecs: Analog Devices AD1988A
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: apic 2 int 17
pci1 at ppb0 bus 3
em0 at pci1 dev 0 function 0 "Intel PRO/1000 PT (82572EI)" rev 0x06: apic 2 int
16, address 00:1b:21:00:9d:43
ppb1 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x02: apic 2 int 17
pci2 at ppb1 bus 2
jmb0 at pci2 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x02
ahci0 at jmb0: apic 2 int 16, AHCI 1.0
scsibus0 at ahci0: 32 targets
pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to
native-PCI
pciide0: using apic 2 int 16 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <PLEXTOR, CD-ROM PX-54TA, 1.00> ATAPI 5/cdrom
removable
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
ppb2 at pci0 dev 28 function 5 "Intel 82801H PCIE" rev 0x02: apic 2 int 16
pci3 at ppb2 bus 1
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2 (0x3800), apic
2 int 17, address 00:18:f3:06:61:d5
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 23
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 19
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2
pci4 at ppb3 bus 4
"TI TSB43AB22 FireWire" rev 0x00 at pci4 dev 1 function 0 not configured
ahc0 at pci4 dev 4 function 0 "Adaptec AHA-2940" rev 0x03: apic 2 int 17
scsibus2 at ahc0: 8 targets, initiator 7
ichpcib0 at pci0 dev 31 function 0 "Intel 82801H LPC" rev 0x02: PM disabled
pciide1 at pci0 dev 31 function 2 "Intel 82801H SATA" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 19 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <HDS728080PLA380>
wd0: 16-sector PIO, LBA48, 78533MB, 160836480 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5
pciide2 at pci0 dev 31 function 5 "Intel 82801H SATA" rev 0x02: DMA, channel 0
wired to native-PCI, channel 1 wired to native-PCI
pciide2: using apic 2 int 19 for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23
lm1 at wbsio0 port 0x290/8: W83627DHG
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
[drm:pid0:i965_intr] hotplug event received, stat 0x00000300
mtrr: Pentium Pro MTRR support
uhidev0 at uhub5 port 2 configuration 1 interface 0 "eGalax Inc. USB
TouchController" rev 1.10/1.00 addr 2
uhid0 at uhidev0 reportid 1: input=5, output=0, feature=0
uhts0 at uhidev0 reportid 2
wsmouse0 at uhts0 mux 0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on wd0a swap on wd0b dump on wd0b
ehci0: port reset timeout
uhub0: port 3 reset failed
[drm:pid4:intel_crtc_set_config] [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid4:intel_crtc_set_config] [CRTC:4] [NOFB]
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid22781:drmopen] open_count = 0
[drm:pid22781:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid22781:drm_addmap] Added map 2 0x2e32000/0x2000
[drm:pid22781:drm_firstopen]
[drm:pid22781:drmopen] minor = 1
[drm:pid3426:drmclose] open_count = 1
[drm:pid3426:drmclose] pid = 3426, device = 0xd2fcd400, open_count = 1
[drm:pid3426:drm_lastclose]
[drm:pid3426:intel_crtc_set_config] [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid3426:intel_crtc_set_config] [CRTC:4] [NOFB]
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid22781:drmopen] open_count = 0
[drm:pid22781:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid22781:drm_addmap] Added map 2 0x2e32000/0x2000
[drm:pid22781:drm_firstopen]
[drm:pid22781:drmopen] minor = 1
[drm:pid3426:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
[drm:pid3426:drmclose] open_count = 1
[drm:pid3426:drmclose] pid = 3426, device = 0xd2fcd400, open_count = 1
[drm:pid3426:drm_lastclose]
[drm:pid3426:intel_crtc_set_config] [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid3426:intel_crtc_set_config] [CRTC:4] [NOFB]
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid22781:drmopen] open_count = 0
[drm:pid22781:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid22781:drm_addmap] Added map 2 0x2e32000/0x2000
[drm:pid22781:drm_firstopen]
[drm:pid22781:drmopen] minor = 1
[drm:pid3426:drmclose] open_count = 1
[drm:pid3426:drmclose] pid = 3426, device = 0xd2fcd400, open_count = 1
[drm:pid3426:drm_lastclose]
[drm:pid3426:intel_crtc_set_config] [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid3426:intel_crtc_set_config] [CRTC:4] [NOFB]
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid22781:drmopen] open_count = 0
[drm:pid22781:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid22781:drm_addmap] Added map 2 0x2e32000/0x2000
[drm:pid22781:drm_firstopen]
[drm:pid22781:drmopen] minor = 1
[drm:pid3426:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
[drm:pid3426:drmclose] open_count = 1
[drm:pid3426:drmclose] pid = 3426, device = 0xd2fcd400, open_count = 1
[drm:pid3426:drm_lastclose]
[drm:pid3426:intel_crtc_set_config] [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid3426:intel_crtc_set_config] [CRTC:4] [NOFB]
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid22781:drmopen] open_count = 0
[drm:pid22781:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid22781:drm_addmap] Added map 2 0x2e32000/0x2000
[drm:pid22781:drm_firstopen]
[drm:pid22781:drmopen] minor = 1
[drm:pid3426:drmclose] open_count = 1
[drm:pid3426:drmclose] pid = 3426, device = 0xd2fcd400, open_count = 1
[drm:pid3426:drm_lastclose]
[drm:pid3426:intel_crtc_set_config] [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid3426:intel_crtc_set_config] [CRTC:4] [NOFB]
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid22781:drmopen] open_count = 0
[drm:pid22781:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid22781:drm_addmap] Added map 2 0x2e32000/0x2000
[drm:pid22781:drm_firstopen]
[drm:pid22781:drmopen] minor = 1
[drm:pid3426:i915_getparam] Unknown parameter 21
[drm:pid3426:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
[drm:pid3426:drm_mode_getresources] [CRTC:3]
[drm:pid3426:drm_mode_getresources] [CRTC:4]
[drm:pid3426:drm_mode_getresources] [ENCODER:6:DAC-6]
[drm:pid3426:drm_mode_getresources] [ENCODER:7:TMDS-7]
[drm:pid3426:drm_mode_getresources] [CONNECTOR:5:VGA-1]
[drm:pid3426:drm_mode_getresources] [CONNECTOR:8:DVI-D-1]
[drm:pid3426:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
[drm:pid3426:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid3426:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
[drm:pid3426:intel_crt_detect] CRT detected via hotplug
[drm:pid3426:drm_edid_to_eld] ELD: no CEA Extension found
[drm:pid3426:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
probed modes :
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 21:"1024x768" 60 65000 1024
1048 1184 1344 768 771 777 806 0x48 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 19:"1024x768" 75 78800 1024
1040 1136 1312 768 769 772 800 0x40 0x5
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 20:"1024x768" 70 75000 1024
1048 1184 1328 768 771 777 806 0x40 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 22:"832x624" 75 57284 832
864 928 1152 624 625 628 667 0x40 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 24:"800x600" 72 50000 800
856 976 1040 600 637 643 666 0x40 0x5
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 23:"800x600" 75 49500 800
816 896 1056 600 601 604 625 0x40 0x5
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 12:"800x600" 60 40000 800
840 968 1056 600 601 605 628 0x40 0x5
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 13:"800x600" 56 36000 800
824 896 1024 600 601 603 625 0x40 0x5
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 15:"640x480" 73 31500 640
664 704 832 480 489 491 520 0x40 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 16:"640x480" 67 30240 640
704 768 864 480 483 486 525 0x40 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 17:"640x480" 60 25200 640
656 752 800 480 490 492 525 0x40 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 18:"720x400" 70 28320 720
738 846 900 400 412 414 449 0x40 0x6
[drm:pid3426:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid3426:drm_mode_getconnector] [CONNECTOR:8:?]
[drm:pid3426:drm_helper_probe_single_connector_modes] [CONNECTOR:8:DVI-D-1]
[drm:pid3426:intel_sdvo_debug_write] SDVOB: W: 0B
(SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:pid3426:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid3426:intel_sdvo_detect] SDVO response 1 0 [1]
[drm:pid3426:intel_sdvo_debug_write] SDVOB: W: 7A 02
(SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid3426:drm_helper_probe_single_connector_modes] [CONNECTOR:8:DVI-D-1]
disconnected
[drm:pid3426:drm_mode_getconnector] [CONNECTOR:8:?]
[drm:pid3426:drm_helper_probe_single_connector_modes] [CONNECTOR:8:DVI-D-1]
[drm:pid3426:intel_sdvo_debug_write] SDVOB: W: 0B
(SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:pid3426:intel_sdvo_write_cmd] sdvo i2c transfer failed
[drm:pid3426:intel_sdvo_debug_write] SDVOB: W: 7A 02
(SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid3426:intel_sdvo_connector_matches_edid] connector_is_digital? 1,
monitor_is_digital? 0
[drm:pid3426:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid3426:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
[drm:pid3426:intel_crt_detect] CRT detected via hotplug
[drm:pid3426:drm_edid_to_eld] ELD: no CEA Extension found
[drm:pid3426:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
probed modes :
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 21:"1024x768" 60 65000 1024
1048 1184 1344 768 771 777 806 0x48 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 19:"1024x768" 75 78800 1024
1040 1136 1312 768 769 772 800 0x40 0x5
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 20:"1024x768" 70 75000 1024
1048 1184 1328 768 771 777 806 0x40 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 22:"832x624" 75 57284 832
864 928 1152 624 625 628 667 0x40 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 24:"800x600" 72 50000 800
856 976 1040 600 637 643 666 0x40 0x5
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 23:"800x600" 75 49500 800
816 896 1056 600 601 604 625 0x40 0x5
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 12:"800x600" 60 40000 800
840 968 1056 600 601 605 628 0x40 0x5
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 13:"800x600" 56 36000 800
824 896 1024 600 601 603 625 0x40 0x5
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 15:"640x480" 73 31500 640
664 704 832 480 489 491 520 0x40 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 16:"640x480" 67 30240 640
704 768 864 480 483 486 525 0x40 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 17:"640x480" 60 25200 640
656 752 800 480 490 492 525 0x40 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 18:"720x400" 70 28320 720
738 846 900 400 412 414 449 0x40 0x6
[drm:pid3426:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid3426:drm_mode_getconnector] [CONNECTOR:8:?]
[drm:pid3426:drm_helper_probe_single_connector_modes] [CONNECTOR:8:DVI-D-1]
[drm:pid3426:intel_sdvo_debug_write] SDVOB: W: 0B
(SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:pid3426:intel_sdvo_write_cmd] sdvo i2c transfer failed
[drm:pid3426:intel_sdvo_debug_write] SDVOB: W: 7A 02
(SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid3426:intel_sdvo_connector_matches_edid] connector_is_digital? 1,
monitor_is_digital? 0
[drm:pid3426:drm_mode_getconnector] [CONNECTOR:8:?]
[drm:pid3426:drm_helper_probe_single_connector_modes] [CONNECTOR:8:DVI-D-1]
[drm:pid3426:intel_sdvo_debug_write] SDVOB: W: 0B
(SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:pid3426:intel_sdvo_write_cmd] sdvo i2c transfer failed
[drm:pid3426:intel_sdvo_debug_write] SDVOB: W: 7A 02
(SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid3426:intel_sdvo_connector_matches_edid] connector_is_digital? 1,
monitor_is_digital? 0
[drm:pid3426:drm_mode_addfb] [FB:58]
[drm:pid3426:drm_mode_setcrtc] [CRTC:3]
[drm:pid3426:drm_mode_setcrtc] [CONNECTOR:5:VGA-1]
[drm:pid3426:intel_crtc_set_config] [CRTC:3] [FB:58] #connectors=1 (x y) (0 0)
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid3426:i9xx_update_plane] Writing base 00CF5000 00000000 0 0 4096
[drm:pid3426:drm_mode_setcrtc] [CRTC:4]
[drm:pid3426:intel_crtc_set_config] [CRTC:4] [NOFB]
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[ 231.667] (--) checkDevMem: using aperture driver /dev/xf86
[ 231.681] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode
(version 3.32)
[ 231.733]
X.Org X Server 1.13.3
Release Date: 2013-03-07
[ 231.733] X Protocol Version 11, Revision 0
[ 231.733] Build Operating System: OpenBSD 5.3 i386
[ 231.733] Current Operating System: OpenBSD harvest.herrb.net 5.3
GENERIC.MP#107 i386
[ 231.733] Build Date: 10 March 2013 01:52:07PM
[ 231.733]
[ 231.733] Current version of pixman: 0.28.0
[ 231.733] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 231.733] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 231.733] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 1 09:58:59
2013
[ 231.773] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 231.783] (==) No Layout section. Using the first Screen section.
[ 231.783] (==) No screen section available. Using defaults.
[ 231.783] (**) |-->Screen "Default Screen Section" (0)
[ 231.783] (**) | |-->Monitor "<default monitor>"
[ 231.784] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 231.784] (==) Disabling SIGIO handlers for input devices
[ 231.784] (==) Automatically adding devices
[ 231.784] (==) Automatically enabling devices
[ 231.784] (==) Not automatically adding GPU devices
[ 231.894] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 231.894] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 231.894] (II) The server relies on wscons to provide the list of input
devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 231.902] (II) Loader magic: 0x3c0240c0
[ 231.902] (II) Module ABI versions:
[ 231.902] X.Org ANSI C Emulation: 0.4
[ 231.903] X.Org Video Driver: 13.1
[ 231.903] X.Org XInput driver : 18.0
[ 231.903] X.Org Server Extension : 7.0
[ 231.906] (--) PCI:*(0:0:2:0) 8086:29a2:1043:81ea rev 2, Mem @
0xffa00000/1048576, 0xd0000000/268435456, I/O @ 0x0000ec00/8
[ 231.906] (--) PCI: (0:0:2:1) 8086:29a3:1043:81ea rev 2, Mem @
0xff800000/1048576
[ 231.906] Initializing built-in extension Generic Event Extension
[ 231.906] Initializing built-in extension SHAPE
[ 231.906] Initializing built-in extension MIT-SHM
[ 231.906] Initializing built-in extension XInputExtension
[ 231.906] Initializing built-in extension XTEST
[ 231.906] Initializing built-in extension BIG-REQUESTS
[ 231.906] Initializing built-in extension SYNC
[ 231.906] Initializing built-in extension XKEYBOARD
[ 231.906] Initializing built-in extension XC-MISC
[ 231.906] Initializing built-in extension SECURITY
[ 231.906] Initializing built-in extension XINERAMA
[ 231.906] Initializing built-in extension XFIXES
[ 231.906] Initializing built-in extension RENDER
[ 231.906] Initializing built-in extension RANDR
[ 231.906] Initializing built-in extension COMPOSITE
[ 231.906] Initializing built-in extension DAMAGE
[ 231.906] Initializing built-in extension MIT-SCREEN-SAVER
[ 231.906] Initializing built-in extension DOUBLE-BUFFER
[ 231.906] Initializing built-in extension RECORD
[ 231.906] Initializing built-in extension DPMS
[ 231.906] Initializing built-in extension X-Resource
[ 231.906] Initializing built-in extension XVideo
[ 231.906] Initializing built-in extension XVideo-MotionCompensation
[ 231.906] Initializing built-in extension XFree86-VidModeExtension
[ 231.906] Initializing built-in extension XFree86-DGA
[ 231.906] Initializing built-in extension XFree86-DRI
[ 231.906] Initializing built-in extension DRI2
[ 231.906] (II) LoadModule: "glx"
[ 231.965] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 231.978] (II) Module glx: vendor="X.Org Foundation"
[ 231.978] compiled for 1.13.3, module version = 1.0.0
[ 231.978] ABI class: X.Org Server Extension, version 7.0
[ 231.978] (==) AIGLX enabled
[ 231.978] Loading extension GLX
[ 231.979] (==) Matched intel as autoconfigured driver 0
[ 231.979] (==) Matched vesa as autoconfigured driver 1
[ 231.979] (==) Assigned the driver to the xf86ConfigLayout
[ 231.979] (II) LoadModule: "intel"
[ 231.979] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[ 232.021] (II) Module intel: vendor="X.Org Foundation"
[ 232.021] compiled for 1.13.3, module version = 2.21.4
[ 232.021] Module class: X.Org Video Driver
[ 232.021] ABI class: X.Org Video Driver, version 13.1
[ 232.029] (II) LoadModule: "vesa"
[ 232.030] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[ 232.037] (II) Module vesa: vendor="X.Org Foundation"
[ 232.037] compiled for 1.13.1, module version = 2.3.2
[ 232.037] Module class: X.Org Video Driver
[ 232.037] ABI class: X.Org Video Driver, version 13.1
[ 232.037] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 232.038] (II) VESA: driver for VESA chipsets: vesa
[ 232.051] (WW) Falling back to old probe method for vesa
[ 232.052] (II) intel(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 232.052] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 232.052] (==) intel(0): RGB weight 888
[ 232.052] (==) intel(0): Default visual is TrueColor
[ 232.052] (--) intel(0): Integrated Graphics Chipset: Intel(R) 965G
[ 232.053] (**) intel(0): Relaxed fencing disabled
[ 232.053] (**) intel(0): Wait on SwapBuffers? enabled
[ 232.053] (**) intel(0): Triple buffering? enabled
[ 232.053] (**) intel(0): Framebuffer tiled
[ 232.053] (**) intel(0): Pixmaps tiled
[ 232.053] (**) intel(0): 3D buffers tiled
[ 232.053] (**) intel(0): SwapBuffers wait enabled
[ 232.053] (==) intel(0): video overlay key set to 0x101fe
[ 232.077] (II) intel(0): Output VGA1 has no monitor section
[ 232.119] (II) intel(0): Output DVI1 has no monitor section
[ 232.166] (II) intel(0): EDID for output VGA1
[ 232.166] (II) intel(0): Manufacturer: IVM Model: 38a9 Serial#: 27
[ 232.166] (II) intel(0): Year: 2008 Week: 51
[ 232.167] (II) intel(0): EDID Version: 1.3
[ 232.167] (II) intel(0): Analog Display Input, Input Voltage Level:
0.700/0.700 V
[ 232.167] (II) intel(0): Sync: Separate
[ 232.167] (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 23
[ 232.167] (II) intel(0): Gamma: 2.20
[ 232.167] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color
Display
[ 232.167] (II) intel(0): First detailed timing is preferred mode
[ 232.167] (II) intel(0): redX: 0.617 redY: 0.347 greenX: 0.290 greenY:
0.593
[ 232.167] (II) intel(0): blueX: 0.148 blueY: 0.100 whiteX: 0.313 whiteY:
0.329
[ 232.167] (II) intel(0): Supported established timings:
[ 232.167] (II) intel(0): 720x400@70Hz
[ 232.167] (II) intel(0): 640x480@60Hz
[ 232.167] (II) intel(0): 640x480@67Hz
[ 232.167] (II) intel(0): 640x480@72Hz
[ 232.167] (II) intel(0): 640x480@75Hz
[ 232.167] (II) intel(0): 800x600@56Hz
[ 232.167] (II) intel(0): 800x600@60Hz
[ 232.167] (II) intel(0): 800x600@72Hz
[ 232.167] (II) intel(0): 800x600@75Hz
[ 232.167] (II) intel(0): 832x624@75Hz
[ 232.167] (II) intel(0): 1024x768@60Hz
[ 232.167] (II) intel(0): 1024x768@70Hz
[ 232.167] (II) intel(0): 1024x768@75Hz
[ 232.167] (II) intel(0): Manufacturer's mask: 0
[ 232.167] (II) intel(0): Supported standard timings:
[ 232.167] (II) intel(0): #0: hsize: 1024 vsize 768 refresh: 60 vid: 16481
[ 232.167] (II) intel(0): Supported detailed timing:
[ 232.167] (II) intel(0): clock: 65.0 MHz Image Size: 304 x 228 mm
[ 232.167] (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184
h_blank_end 1344 h_border: 0
[ 232.167] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777
v_blanking: 806 v_border: 0
[ 232.167] (II) intel(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 63
kHz, PixClock max 95 MHz
[ 232.167] (II) intel(0): Serial No: 1102485100027
[ 232.167] (II) intel(0): Monitor name: PLT1530S
[ 232.167] (II) intel(0): EDID (in hex):
[ 232.167] (II) intel(0): 00ffffffffffff0026cda9381b000000
[ 232.167] (II) intel(0): 33120103681e1778ea37259e584a9726
[ 232.167] (II) intel(0): 195054bfee0061400101010101010101
[ 232.167] (II) intel(0): 01010101010164190040410026301888
[ 232.167] (II) intel(0): 360030e410000018000000fd00374c1e
[ 232.167] (II) intel(0): 3f09000a202020202020000000ff0031
[ 232.167] (II) intel(0): 313032343835313030303237000000fc
[ 232.167] (II) intel(0): 00504c5431353330530a202020200027
[ 232.168] (II) intel(0): Printing probed modes for output VGA1
[ 232.168] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 232.168] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 232.168] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184
1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 232.168] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 232.168] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040
600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 232.168] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 232.168] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 232.168] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 232.168] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832
480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 232.168] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864
480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 232.168] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 232.168] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 232.207] (II) intel(0): EDID for output DVI1
[ 232.208] (II) intel(0): Not using default mode "640x350" (vrefresh out of
range)
[ 232.208] (II) intel(0): Not using default mode "320x175" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "640x400" (vrefresh out of
range)
[ 232.208] (II) intel(0): Not using default mode "320x200" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "720x400" (vrefresh out of
range)
[ 232.208] (II) intel(0): Not using default mode "360x200" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "320x240" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "640x480" (vrefresh out of
range)
[ 232.208] (II) intel(0): Not using default mode "320x240" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "640x480" (vrefresh out of
range)
[ 232.208] (II) intel(0): Not using default mode "320x240" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "640x480" (vrefresh out of
range)
[ 232.208] (II) intel(0): Not using default mode "320x240" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "800x600" (vrefresh out of
range)
[ 232.208] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "800x600" (vrefresh out of
range)
[ 232.208] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "800x600" (vrefresh out of
range)
[ 232.208] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "800x600" (vrefresh out of
range)
[ 232.208] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "1024x768i" (vrefresh out of
range)
[ 232.208] (II) intel(0): Not using default mode "512x384i" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "512x384" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "1024x768" (vrefresh out of
range)
[ 232.208] (II) intel(0): Not using default mode "512x384" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "1024x768" (vrefresh out of
range)
[ 232.208] (II) intel(0): Not using default mode "512x384" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "1024x768" (vrefresh out of
range)
[ 232.208] (II) intel(0): Not using default mode "512x384" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "1152x864" (vrefresh out of
range)
[ 232.208] (II) intel(0): Not using default mode "576x432" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "1280x960" (hsync out of
range)
[ 232.208] (II) intel(0): Not using default mode "640x480" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "1280x960" (vrefresh out of
range)
[ 232.208] (II) intel(0): Not using default mode "640x480" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "1280x1024" (hsync out of
range)
[ 232.208] (II) intel(0): Not using default mode "640x512" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "1280x1024" (vrefresh out of
range)
[ 232.208] (II) intel(0): Not using default mode "640x512" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "1280x1024" (vrefresh out of
range)
[ 232.208] (II) intel(0): Not using default mode "640x512" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "1600x1200" (hsync out of
range)
[ 232.208] (II) intel(0): Not using default mode "800x600" (doublescan mode
not supported)
[ 232.208] (II) intel(0): Not using default mode "1600x1200" (vrefresh out of
range)
[ 232.209] (II) intel(0): Not using default mode "800x600" (doublescan mode
not supported)
[ 232.209] (II) intel(0): Not using default mode "1600x1200" (vrefresh out of
range)
[ 232.209] (II) intel(0): Not using default mode "800x600" (doublescan mode
not supported)
[ 232.209] (II) intel(0): Not using default mode "1600x1200" (vrefresh out of
range)
[ 232.209] (II) intel(0): Not using default mode "800x600" (doublescan mode
not supported)
[ 232.209] (II) intel(0): Not using default mode "1600x1200" (vrefresh out of
range)
[ 232.209] (II) intel(0): Not using default mode "800x600" (doublescan mode
not supported)
[ 232.209] (II) intel(0): Not using default mode "1792x1344" (hsync out of
range)
[ 232.209] (II) intel(0): Not using default mode "896x672" (doublescan mode
not supported)
[ 232.209] (II) intel(0): Not using default mode "1792x1344" (vrefresh out of
range)
[ 232.209] (II) intel(0): Not using default mode "896x672" (doublescan mode
not supported)
[ 232.209] (II) intel(0): Not using default mode "1856x1392" (hsync out of
range)
[ 232.209] (II) intel(0): Not using default mode "928x696" (doublescan mode
not supported)
[ 232.209] (II) intel(0): Not using default mode "1856x1392" (vrefresh out of
range)
[ 232.209] (II) intel(0): Not using default mode "928x696" (doublescan mode
not supported)
[ 232.209] (II) intel(0): Not using default mode "1920x1440" (hsync out of
range)
[ 232.209] (II) intel(0): Not using default mode "960x720" (doublescan mode
not supported)
[ 232.209] (II) intel(0): Not using default mode "1920x1440" (vrefresh out of
range)
[ 232.209] (II) intel(0): Not using default mode "960x720" (doublescan mode
not supported)
[ 232.209] (II) intel(0): Not using default mode "832x624" (vrefresh out of
range)
[ 232.209] (II) intel(0): Not using default mode "416x312" (doublescan mode
not supported)
[ 232.209] (II) intel(0): Not using default mode "1400x1050" (hsync out of
range)
[ 232.209] (II) intel(0): Not using default mode "700x525" (doublescan mode
not supported)
[ 232.209] (II) intel(0): Not using default mode "1400x1050" (vrefresh out of
range)
[ 232.209] (II) intel(0): Not using default mode "700x525" (doublescan mode
not supported)
[ 232.209] (II) intel(0): Not using default mode "1920x1440" (vrefresh out of
range)
[ 232.209] (II) intel(0): Not using default mode "960x720" (doublescan mode
not supported)
[ 232.209] (II) intel(0): Not using default mode "2048x1536" (hsync out of
range)
[ 232.209] (II) intel(0): Not using default mode "1024x768" (doublescan mode
not supported)
[ 232.209] (II) intel(0): Not using default mode "2048x1536" (vrefresh out of
range)
[ 232.209] (II) intel(0): Not using default mode "1024x768" (doublescan mode
not supported)
[ 232.209] (II) intel(0): Not using default mode "2048x1536" (vrefresh out of
range)
[ 232.209] (II) intel(0): Not using default mode "1024x768" (doublescan mode
not supported)
[ 232.209] (II) intel(0): Printing probed modes for output DVI1
[ 232.209] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 232.209] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 232.209] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 232.209] (II) intel(0): Output VGA1 connected
[ 232.209] (II) intel(0): Output DVI1 disconnected
[ 232.209] (II) intel(0): Using exact sizes for initial modes
[ 232.209] (II) intel(0): Output VGA1 using initial mode 1024x768
[ 232.209] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 232.209] (II) intel(0): Kernel page flipping support detected, enabling
[ 232.209] (==) intel(0): DPI set to (96, 96)
[ 232.210] (II) Loading sub module "fb"
[ 232.210] (II) LoadModule: "fb"
[ 232.236] (II) Loading /usr/X11R6/lib/modules/libfb.so
[ 232.247] (II) Module fb: vendor="X.Org Foundation"
[ 232.247] compiled for 1.13.3, module version = 1.0.0
[ 232.247] ABI class: X.Org ANSI C Emulation, version 0.4
[ 232.247] (II) Loading sub module "dri2"
[ 232.247] (II) LoadModule: "dri2"
[ 232.247] (II) Module "dri2" already built-in
[ 232.247] (II) UnloadModule: "vesa"
[ 232.247] (II) Unloading vesa
[ 232.247] (==) Depth 24 pixmap format is 32 bpp
[ 232.263] (II) intel(0): [DRI2] Setup complete
[ 232.263] (II) intel(0): [DRI2] DRI driver: i965
[ 232.263] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096,
tiled
[ 232.365] (II) UXA(0): Driver registered support for the following
operations:
[ 232.365] (II) solid
[ 232.365] (II) copy
[ 232.365] (II) composite (RENDER acceleration)
[ 232.365] (II) put_image
[ 232.365] (II) get_image
[ 232.365] (==) intel(0): Backing store disabled
[ 232.365] (==) intel(0): Silken mouse disabled
[ 232.365] (II) intel(0): Initializing HW Cursor
[ 232.365] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 232.371] (==) intel(0): DPMS enabled
[ 232.371] (==) intel(0): Intel XvMC decoder enabled
[ 232.371] (II) intel(0): Set up textured video
[ 232.379] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[ 232.379] (II) intel(0): direct rendering: DRI2 Enabled
[ 232.393] (--) RandR disabled
[ 232.674] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 232.674] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 232.674] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 232.674] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 232.674] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 232.674] (II) AIGLX: Loaded and initialized i965
[ 232.674] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 232.681] (II) intel(0): Setting screen physical size to 270 x 203
[ 233.363] (II) config/wscons: checking input device /dev/wskbd
[ 233.363] (II) wskbd: using layout us
[ 233.363] (II) LoadModule: "kbd"
[ 233.364] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 233.378] (II) Module kbd: vendor="X.Org Foundation"
[ 233.378] compiled for 1.13.1, module version = 1.6.2
[ 233.378] Module class: X.Org XInput Driver
[ 233.378] ABI class: X.Org XInput driver, version 18.0
[ 233.378] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 233.378] (**) /dev/wskbd: always reports core events
[ 233.378] (**) /dev/wskbd: always reports core events
[ 233.378] (**) Option "Protocol" "standard"
[ 233.378] (**) Option "XkbRules" "base"
[ 233.378] (**) Option "XkbModel" "pc105"
[ 233.378] (**) Option "XkbLayout" "us"
[ 233.378] (II) XINPUT: Adding extended input device "/dev/wskbd" (type:
KEYBOARD, id 6)
[ 233.440] (II) config/wscons: checking input device /dev/wsmouse0
[ 233.440] (II) LoadModule: "ws"
[ 233.442] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 233.454] (II) Module ws: vendor="X.Org Foundation"
[ 233.454] compiled for 1.13.1, module version = 1.3.0
[ 233.454] Module class: X.Org XInput Driver
[ 233.454] ABI class: X.Org XInput driver, version 18.0
[ 233.454] (II) Using input driver 'ws' for '/dev/wsmouse0'
[ 233.454] (**) /dev/wsmouse0: always reports core events
[ 233.455] (II) ws: /dev/wsmouse0: debuglevel 0
[ 233.455] (**) Option "Device" "/dev/wsmouse0"
[ 233.455] (**) ws: /dev/wsmouse0: ZAxisMapping: buttons 4 and 5
[ 233.455] (**) ws: /dev/wsmouse0: WAxisMapping: buttons 6 and 7
[ 233.455] (**) ws: /dev/wsmouse0: associated screen: 0
[ 233.455] (**) ws: /dev/wsmouse0: device will work in raw mode
[ 233.455] (II) ws: /dev/wsmouse0: minimum x position: 30
[ 233.455] (II) ws: /dev/wsmouse0: maximum x position: 4040
[ 233.455] (II) ws: /dev/wsmouse0: minimum y position: 60
[ 233.455] (II) ws: /dev/wsmouse0: maximum y position: 4035
[ 233.455] (==) ws: /dev/wsmouse0: Buttons: 7
[ 233.491] (**) ws: /dev/wsmouse0: YAxisMapping: buttons 4 and 5
[ 233.491] (II) XINPUT: Adding extended input device "/dev/wsmouse0" (type:
TOUCHSCREEN, id 7)
[ 233.491] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[ 233.491] (**) /dev/wsmouse0: (accel) acceleration profile 0
[ 233.491] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[ 233.491] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[ 233.492] (II) config/wscons: checking input device /dev/wsmouse
[ 233.492] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 233.492] (**) /dev/wsmouse: always reports core events
[ 233.492] (II) ws: /dev/wsmouse: debuglevel 0
[ 233.492] (**) Option "Device" "/dev/wsmouse"
[ 233.492] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 233.492] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 233.492] (**) ws: /dev/wsmouse: associated screen: 0
[ 233.492] (II) ws: /dev/wsmouse: minimum x position: 0
[ 233.492] (II) ws: /dev/wsmouse: maximum x position: 1023
[ 233.492] (II) ws: /dev/wsmouse: minimum y position: 0
[ 233.492] (II) ws: /dev/wsmouse: maximum y position: 767
[ 233.492] (==) ws: /dev/wsmouse: Buttons: 7
[ 233.492] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 233.492] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type:
MOUSE, id 8)
[ 233.492] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 233.492] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 233.492] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 233.492] (**) /dev/wsmouse: (accel) acceleration threshold: 4
--
Matthieu Herrb
