* Mark Kettenis <mark.kette...@xs4all.nl> [2013-03-29 14:52]: > > Date: Fri, 29 Mar 2013 13:24:58 +1100 > > From: Jonathan Gray <j...@jsg.id.au> > > > > On Fri, Mar 29, 2013 at 12:33:32PM +1100, Jonathan Gray wrote: > > > On Thu, Mar 28, 2013 at 09:38:20AM +0100, Ralf Horstmann wrote: > > > > Hi, > > > > > > > > with current snapshot (i386) the DVI output of the docking station of > > > > my Fujitsu Lifebook T4215 is not detected anymore. Under Linux (Debian > > > > kernel 3.2) it's detected as DVI1. With older OpenBSD versions it was > > > > detected as TMDS-1. > > > > > > > > VGA on the docking station works fine as well as directly attached to > > > > the > > > > laptop. In contrast to VGA, there is no DVI output at the laptop, only > > > > at the > > > > docking station. > > > > > > > > Cheers, > > > > Ralf > > > > > > It sounds like your docking station has a SDVO output, which > > > apparently requires bitbanging for gmbus which we don't > > > yet do. > > > > Looking over the sdvo code it seems part of the i2c code > > is wrong, try this: > > That diff isn't quite right either. The following should be > equivalent to what Linux is doing. Can't test this myself > unfortunately.
With this patch I get: [drm:pid0:intel_setup_outputs] probing SDVOB [drm:pid0:intel_sdvo_debug_write] SDVOB: W: 02 (SDVO_CMD_GET_DEVICE_CAPS) [drm:pid0:intel_sdvo_write_cmd] sdvo i2c transfer failed [drm:pid0:intel_setup_outputs] probing SDVOC [drm:pid0:intel_sdvo_debug_write] SDVOC: W: 02 (SDVO_CMD_GET_DEVICE_CAPS) [drm:pid0:intel_sdvo_write_cmd] sdvo i2c transfer failed Cheers, Ralf OpenBSD 5.3-current (GENERIC.MP) #3: Fri Mar 29 15:03:42 CET 2013 ralf@adams.internal:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF real mem = 2136797184 (2037MB) avail mem = 2090307584 (1993MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 05/07/07, BIOS32 rev. 0 @ 0xfdbf4, SMBIOS rev. 2.4 @ 0xe5550 (53 entries) bios0: vendor FUJITSU // Phoenix Technologies Ltd. version "Version 1.14" date 05/07/2007 bios0: FUJITSU SIEMENS LIFEBOOK T4215 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SSDT MCFG SSDT SSDT APIC HPET BOOT SLIC acpi0: wakeup devices PCIB(S4) MODM(S3) HDEF(S3) PXS1(S4) PXS2(S4) LID_(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 166MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 8 (PCIB) acpiprt2 at acpi0: bus 2 (RP01) acpiprt3 at acpi0: bus 3 (RP02) acpiprt4 at acpi0: bus 5 (RP03) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpitz0 at acpi0: critical temperature is 100 degC acpitz1 at acpi0: critical temperature is 100 degC acpifujitsu at acpi0 not configured acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: PWRB acpiac0 at acpi0: AC unit online acpibat0 at acpi0: CMB1 model "CP293420" serial 1 type LION oem "Fujitsu" acpibat1 at acpi0: CMB2 not present acpibtn2 at acpi0: SLPB acpidock0 at acpi0: REPL docked (15) bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000 0xd0200/0x1000 0xdc000/0x1c00! cpu0: Enhanced SpeedStep 1996 MHz: speeds: 2000, 1667, 1333, 1000 MHz memory map conflict 0xfed00000/0x400 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03 vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03 intagp0 at vga1 agp0 at intagp0: aperture at 0xe0000000, size 0x10000000 inteldrm0 at vga1 drm0 at inteldrm0[drm:pid0:drm_agp_init] agp_available = 1 [drm:pid0:drm_ctxbitmap_next] drm_ctxbitmap_next bit : 0 [drm:pid0:drm_ctxbitmap_init] drm_ctxbitmap_init : 0 [drm:pid0:intel_detect_pch] No PCH detected inteldrm0: apic 2 int 16 [drm:pid0:drm_vblank_init] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm:pid0:drm_vblank_init] Driver supports precise vblank timestamp query. [drm:pid0:intel_opregion_setup] graphic opregion physical addr: 0x0 [drm:pid0:intel_opregion_setup] ACPI OpRegion not supported! [drm:pid0:init_vbt_defaults] Set default to SSC at 100MHz [drm:pid0:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 96 display_clock_mode 0 [drm:pid0:parse_general_definitions] crt_ddc_bus_pin: 2 [drm:pid0:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa [drm:pid0:parse_lfp_panel_data] VBT initial LVDS value 40300300 [drm:pid0:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [drm:pid0:parse_sdvo_device_mapping] the SDVO device with slave addr 70 is found on SDVOB port [drm:pid0:parse_sdvo_device_mapping] SDVO device: dvo=1, addr=70, wiring=1, ddc_pin=29, i2c_pin=5 [drm:pid0:intel_modeset_init] todo set fb base [drm:pid0:intel_modeset_init] 2 display pipes available. [drm:pid0:intel_crtc_init] swapping pipes & planes for FBC [drm:pid0:intel_modeset_init] plane 0 init failed: -19 [drm:pid0:intel_crtc_init] swapping pipes & planes for FBC [drm:pid0:intel_modeset_init] plane 1 init failed: -19 [drm:pid0:intel_pch_pll_init] No PCH PLLs on this hardware, skipping initialisation [drm:pid0:intel_lvds_init] using mode from VBT: [drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa [drm:pid0:intel_panel_get_backlight] get backlight PWM = 15625 [drm:pid0:intel_setup_outputs] probing SDVOB [drm:pid0:intel_sdvo_debug_write] SDVOB: W: 02 (SDVO_CMD_GET_DEVICE_CAPS) [drm:pid0:intel_sdvo_write_cmd] sdvo i2c transfer failed [drm:pid0:intel_setup_outputs] probing SDVOC [drm:pid0:intel_sdvo_debug_write] SDVOC: W: 02 (SDVO_CMD_GET_DEVICE_CAPS) [drm:pid0:intel_sdvo_write_cmd] sdvo i2c transfer failed [drm:pid0:intel_setup_overlay] initialized overlay support [drm:pid0:intel_modeset_setup_hw_state] [CRTC:3] hw state readout: disabled [drm:pid0:intel_modeset_setup_hw_state] [CRTC:4] hw state readout: enabled [drm:pid0:intel_modeset_setup_hw_state] [ENCODER:6:LVDS-6] hw state readout: enabled, pipe=1 [drm:pid0:intel_modeset_setup_hw_state] [ENCODER:10:DAC-10] hw state readout: disabled, pipe=0 [drm:pid0:intel_modeset_setup_hw_state] [ENCODER:14:TV-14] hw state readout: disabled, pipe=0 [drm:pid0:intel_modeset_setup_hw_state] [CONNECTOR:5:LVDS-1] hw state readout: enabled [drm:pid0:intel_modeset_setup_hw_state] [CONNECTOR:9:VGA-1] hw state readout: disabled [drm:pid0:intel_modeset_setup_hw_state] [CONNECTOR:13:SVIDEO-1] hw state readout: disabled [drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1] [drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6] [drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10] [drm:pid0:intel_modeset_check_state] [ENCODER:14:TV-14] [drm:pid0:intel_modeset_check_state] [CRTC:3] [drm:pid0:intel_modeset_check_state] [CRTC:4] [drm:pid0:drm_irq_install] irq=11 [drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] [drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes : [drm:pid0:drm_mode_debug_printmodeline] Modeline 28:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa [drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] [drm:pid0:intel_crt_detect] CRT detected via hotplug [drm:pid0:drm_edid_to_eld] ELD: no CEA Extension found [drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] probed modes : [drm:pid0:drm_mode_debug_printmodeline] Modeline 30:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [drm:pid0:drm_mode_debug_printmodeline] Modeline 35:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6 [drm:pid0:drm_mode_debug_printmodeline] Modeline 33:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [drm:pid0:drm_mode_debug_printmodeline] Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [drm:pid0:drm_mode_debug_printmodeline] Modeline 32:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [drm:pid0:drm_mode_debug_printmodeline] Modeline 31:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [drm:pid0:drm_mode_debug_printmodeline] Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [drm:pid0:drm_mode_debug_printmodeline] Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [drm:pid0:drm_mode_debug_printmodeline] Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [drm:pid0:drm_mode_debug_printmodeline] Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1] [drm:pid0:intel_get_load_detect_pipe] [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14] [drm:pid0:intel_get_load_detect_pipe] creating tmp fb for load-detection [drm:pid0:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [drm:pid0:intel_modeset_adjusted_mode] [CRTC:3] [drm:pid0:i9xx_crtc_mode_set] Mode for pipe A: [drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0 [drm:pid0:i9xx_update_plane] Writing base 007E0000 00000000 0 0 5120 [drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28 [drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31 [drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 29 [drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1 [drm:pid0:i9xx_update_wm] memory self refresh disabled [drm:pid0:intel_crtc_mode_set] [ENCODER:14:TV-14] set [MODE:0:NTSC 480i] [drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28 [drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31 [drm:pid0:intel_calculate_wm] FIFO entries required for mode: 34 [drm:pid0:intel_calculate_wm] FIFO watermark level: -5 [drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 1 [drm:pid0:i9xx_update_wm] self-refresh entries: 80 [drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 47 [drm:pid0:i9xx_update_wm] memory self refresh enabled [drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1] [drm:pid0:intel_connector_check_state] [CONNECTOR:13:SVIDEO-1] [drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6] [drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10] [drm:pid0:intel_modeset_check_state] [ENCODER:14:TV-14] [drm:pid0:intel_modeset_check_state] [CRTC:3] [drm:pid0:intel_modeset_check_state] [CRTC:4] [drm:pid0:intel_tv_detect_type] TV detected: c0007, 7f0000aa [drm:pid0:intel_tv_detect_type] Unrecognised TV connection [drm:pid0:intel_release_load_detect_pipe] [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14] [drm:pid0:intel_set_mode] set mode pipe masks: modeset: 0, prepare: 0, disable: 1 [drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28 [drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31 [drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 29 [drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1 [drm:pid0:i9xx_update_wm] memory self refresh disabled [drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1] [drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6] [drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10] [drm:pid0:intel_modeset_check_state] [ENCODER:14:TV-14] [drm:pid0:intel_modeset_check_state] [CRTC:3] [drm:pid0:intel_modeset_check_state] [CRTC:4] [drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1] disconnected [drm:pid0:drm_setup_crtcs] [drm:pid0:drm_enable_connectors] connector 5 enabled? yes [drm:pid0:drm_enable_connectors] connector 9 enabled? yes [drm:pid0:drm_enable_connectors] connector 13 enabled? no [drm:pid0:drm_target_preferred] looking for cmdline mode on connector 5 [drm:pid0:drm_pick_cmdline_mode] stub [drm:pid0:drm_target_preferred] looking for preferred mode on connector 5 [drm:pid0:drm_target_preferred] found mode 1024x768 [drm:pid0:drm_target_preferred] looking for cmdline mode on connector 9 [drm:pid0:drm_pick_cmdline_mode] stub [drm:pid0:drm_target_preferred] looking for preferred mode on connector 9 [drm:pid0:drm_target_preferred] found mode 1920x1200 [drm:pid0:drm_setup_crtcs] picking CRTCs for 4096x4096 config [drm:pid0:drm_setup_crtcs] desired mode 1024x768 set on crtc 4 [drm:pid0:drm_setup_crtcs] desired mode 1920x1200 set on crtc 3 [drm:pid0:intelfb_create] allocated 1920x1200 fb: 0x007e0000, bo 0xd8fb8158 [drm:pid0:intelfb_create] skipping call to vga_switcheroo_client_fb_set [drm:pid0:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0) [drm:pid0:intel_set_config_compute_mode_changes] crtc has no fb, full mode set [drm:pid0:intel_set_config_compute_mode_changes] modes are different, full mode set [drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0 [drm:pid0:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [drm:pid0:intel_modeset_stage_output_state] encoder changed, full mode switch [drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3] [drm:pid0:intel_modeset_stage_output_state] crtc changed, full mode switch [drm:pid0:intel_crtc_set_config] attempting to set mode from userspace [drm:pid0:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [drm:pid0:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [drm:pid0:intel_modeset_adjusted_mode] [CRTC:3] [drm:pid0:i9xx_crtc_mode_set] Mode for pipe A: [drm:pid0:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [drm:pid0:i9xx_update_plane] Writing base 007E0000 00000000 0 0 7680 [drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28 [drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31 [drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 29 [drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1 [drm:pid0:i9xx_update_wm] memory self refresh disabled [drm:pid0:intel_crtc_mode_set] [ENCODER:10:DAC-10] set [MODE:43:1920x1200] [drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28 [drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31 [drm:pid0:intel_calculate_wm] FIFO entries required for mode: 49 [drm:pid0:intel_calculate_wm] FIFO watermark level: -20 [drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 1 [drm:pid0:i9xx_update_wm] self-refresh entries: 120 [drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 7 [drm:pid0:i9xx_update_wm] memory self refresh enabled [drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1] [drm:pid0:intel_connector_check_state] [CONNECTOR:9:VGA-1] [drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6] [drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10] [drm:pid0:intel_modeset_check_state] [ENCODER:14:TV-14] [drm:pid0:intel_modeset_check_state] [CRTC:3] [drm:pid0:intel_modeset_check_state] [CRTC:4] [drm:pid0:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0) [drm:pid0:intel_set_config_compute_mode_changes] crtc has no fb, full mode set [drm:pid0:intel_set_config_compute_mode_changes] modes are different, full mode set [drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:pid0:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa [drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3] [drm:pid0:intel_crtc_set_config] attempting to set mode from userspace [drm:pid0:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa [drm:pid0:intel_set_mode] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [drm:pid0:intel_modeset_adjusted_mode] [CRTC:4] [drm:pid0:intel_panel_actually_set_backlight] set backlight PWM = 0 [drm:pid0:drm_calc_vbltimestamp_from_scanoutpos] crtc 1: Noop due to uninitialized mode. [drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28 [drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31 [drm:pid0:intel_calculate_wm] FIFO entries required for mode: 49 [drm:pid0:intel_calculate_wm] FIFO watermark level: -20 [drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 1 [drm:pid0:i9xx_update_wm] self-refresh entries: 120 [drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 7 [drm:pid0:i9xx_update_wm] memory self refresh enabled [drm:pid0:i9xx_get_refclk] using SSC reference clock of 96 MHz [drm:pid0:i9xx_crtc_mode_set] Mode for pipe B: [drm:pid0:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa [drm:pid0:i9xx_update_plane] Writing base 007E0000 00000000 0 0 7680 [drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28 [drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31 [drm:pid0:intel_calculate_wm] FIFO entries required for mode: 49 [drm:pid0:intel_calculate_wm] FIFO watermark level: -20 [drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 1 [drm:pid0:i9xx_update_wm] self-refresh entries: 120 [drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 7 [drm:pid0:i9xx_update_wm] memory self refresh enabled [drm:pid0:intel_crtc_mode_set] [ENCODER:6:LVDS-6] set [MODE:42:1024x768] [drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28 [drm:pid0:intel_calculate_wm] FIFO entries required for mode: 21 [drm:pid0:intel_calculate_wm] FIFO watermark level: 5 [drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31 [drm:pid0:intel_calculate_wm] FIFO entries required for mode: 49 [drm:pid0:intel_calculate_wm] FIFO watermark level: -20 [drm:pid0:i9xx_update_wm] FIFO watermarks - A: 5, B: 1 [drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 1, C: 2, SR 1 [drm:pid0:i9xx_update_wm] memory self refresh disabled [drm:pid0:intel_enable_lvds] applying panel-fitter: 8, 0 [drm:pid0:intel_panel_actually_set_backlight] set backlight PWM = 15625 [drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1] [drm:pid0:intel_connector_check_state] [CONNECTOR:9:VGA-1] [drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6] [drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10] [drm:pid0:intel_modeset_check_state] [ENCODER:14:TV-14] [drm:pid0:intel_modeset_check_state] [CRTC:3] [drm:pid0:intel_modeset_check_state] [CRTC:4] wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi azalia0: codecs: Sigmatel STAC9228X audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 22 pci1 at ppb0 bus 2 mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8055" rev 0x12, Yukon-2 EC Ultra rev. A1 (0x2): apic 2 int 16 msk0 at mskc0 port A: address 00:17:42:41:a8:2d eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1 ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 21 pci2 at ppb1 bus 3 ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 2 int 20 pci3 at ppb2 bus 5 5:0:0: mem address conflict 0xf0100000/0x1000 wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, MoW2, address 00:1b:77:72:01:7c uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23 uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 20 uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18 uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16 ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 pci4 at ppb3 bus 8 cbb0 at pci4 dev 3 function 0 "O2 Micro OZ711MP1 CardBus" rev 0x20: apic 2 int 16 cbb1 at pci4 dev 3 function 1 "O2 Micro OZ711MP1 CardBus" rev 0x20: apic 2 int 16, CardBus support disabled sdhc0 at pci4 dev 3 function 2 "O2 Micro OZ711MP1 SDHC" rev 0x00: apic 2 int 16 sdmmc0 at sdhc0 "O2 Micro OZ711MP1 XDHC" rev 0x00 at pci4 dev 3 function 3 not configured cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 9 device 0 cacheline 0x0, lattimer 0x20 pcmcia0 at cardslot0 cardslot1 at cbb1 slot 1 flags 0 pcmcia1 at cardslot1 ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-841S, 1.31> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1 ahci0: PHY offline on port 2 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, INTEL SSDSC2MH12, PPG4> SCSI3 0/direct fixed naa.01507a51e26b8cdf sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 19 iic0 at ichiic0 iic0: addr 0x19 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00 09=00 0a=00 0b=00 0c=00 0d=00 0e=00 0f=00 10=00 11=20 24=00 b9=00 ba=00 words 00=0000 01=0000 02=0000 03=0000 04=0040 05=0000 06=0000 07=0000 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pms0: Synaptics touchpad, firmware 6.2 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support "O2Micro, SmartCardBus Reader, V1.0" at pcmcia1 function 0 not configured scsibus2 at sdmmc0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed sd1: 15423MB, 512 bytes/sector, 31586304 sectors uhub5 at uhub0 port 4 "NEC Corporation USB2.0 Hub Controller" rev 2.00/1.00 addr 2 uplcom0 at uhub5 port 2 "Prolific Technology PL2303 Serial" rev 1.10/2.02 addr 3 ucom0 at uplcom0 uhub6 at uhub5 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 addr 4 uhub7 at uhub6 port 2 "GENESYS USB 2.0 HUB" rev 2.00/77.60 addr 5 uhidev0 at uhub7 port 1 configuration 1 interface 0 "Logitech Optical USB Mouse" rev 2.00/3.40 addr 6 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse1 at ums0 mux 0 uhidev1 at uhub7 port 3 configuration 1 interface 0 "Alcor Micro product 0x3108" rev 1.10/3.01 addr 7 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev2 at uhub7 port 3 configuration 1 interface 1 "Alcor Micro product 0x3108" rev 1.10/3.01 addr 7 uhidev2: iclass 3/0, 2 report ids uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0 uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0 uaudio0 at uhub7 port 4 configuration 1 interface 0 "C-Media Electronics Inc. USB Multimedia Audio Device" rev 1.10/1.00 addr 8 uaudio0: audio rev 1.00, 8 mixer controls audio1 at uaudio0 uhidev3 at uhub7 port 4 configuration 1 interface 3 "C-Media Electronics Inc. USB Multimedia Audio Device" rev 1.10/1.00 addr 8 uhidev3: iclass 3/0 uhid2 at uhidev3: input=16, output=16, feature=0 ugen0 at uhub3 port 1 "vendor 0x0c24 product 0x000f" rev 2.00/19.15 addr 2 [drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2 ugen1 at uhub3 port 2 "AuthenTec Fingerprint Sensor" rev 1.10/6.21 addr 3 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets root on sd0a (3e4d92862aa71140.a) swap on sd0b dump on sd0b [drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2 sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed sd2: 80821MB, 512 bytes/sector, 165522270 sectors [drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2 [drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2 [drm:pid4:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0) [drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3] [drm:pid4:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0) [drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3] [drm:pid9834:drmopen] open_count = 0 [drm:pid9834:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2 [drm:pid9834:drm_addmap] Added map 2 0x2fee000/0x2000 [drm:pid9834:drm_firstopen] [drm:pid9834:drmopen] minor = 1 [drm:pid10533:drmclose] open_count = 1 [drm:pid10533:drmclose] pid = 10533, device = 0xd3009400, open_count = 1 [drm:pid10533:drm_lastclose] [drm:pid10533:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0) [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3] [drm:pid10533:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0) [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3] [drm:pid9834:drmopen] open_count = 0 [drm:pid9834:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2 [drm:pid9834:drm_addmap] Added map 2 0x2fee000/0x2000 [drm:pid9834:drm_firstopen] [drm:pid9834:drmopen] minor = 1 [drm:pid10533:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3] [drm:pid10533:drmclose] open_count = 1 [drm:pid10533:drmclose] pid = 10533, device = 0xd3009400, open_count = 1 [drm:pid10533:drm_lastclose] [drm:pid10533:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0) [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3] [drm:pid10533:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0) [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3] [drm:pid9834:drmopen] open_count = 0 [drm:pid9834:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2 [drm:pid9834:drm_addmap] Added map 2 0x2fee000/0x2000 [drm:pid9834:drm_firstopen] [drm:pid9834:drmopen] minor = 1 [drm:pid10533:drmclose] open_count = 1 [drm:pid10533:drmclose] pid = 10533, device = 0xd3009400, open_count = 1 [drm:pid10533:drm_lastclose] [drm:pid10533:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0) [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3] [drm:pid10533:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0) [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3] [drm:pid9834:drmopen] open_count = 0 [drm:pid9834:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2 [drm:pid9834:drm_addmap] Added map 2 0x2fee000/0x2000 [drm:pid9834:drm_firstopen] [drm:pid9834:drmopen] minor = 1 [drm:pid10533:drmclose] open_count = 1 [drm:pid10533:drmclose] pid = 10533, device = 0xd3009400, open_count = 1 [drm:pid10533:drm_lastclose] [drm:pid10533:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0) [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3] [drm:pid10533:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0) [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3] [drm:pid9834:drmopen] open_count = 0 [drm:pid9834:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2 [drm:pid9834:drm_addmap] Added map 2 0x2fee000/0x2000 [drm:pid9834:drm_firstopen] [drm:pid9834:drmopen] minor = 1 [drm:pid10533:drmclose] open_count = 1 [drm:pid10533:drmclose] pid = 10533, device = 0xd3009400, open_count = 1 [drm:pid10533:drm_lastclose] [drm:pid10533:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0) [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3] [drm:pid10533:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0) [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3] [drm:pid9834:drmopen] open_count = 0 [drm:pid9834:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2 [drm:pid9834:drm_addmap] Added map 2 0x2fee000/0x2000 [drm:pid9834:drm_firstopen] [drm:pid9834:drmopen] minor = 1 [drm:pid10533:i915_getparam] Unknown parameter 19 [drm:pid10533:i915_getparam] Unknown parameter 21 [drm:pid10533:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3] [drm:pid10533:drm_mode_getresources] [CRTC:3] [drm:pid10533:drm_mode_getresources] [CRTC:4] [drm:pid10533:drm_mode_getresources] [ENCODER:6:LVDS-6] [drm:pid10533:drm_mode_getresources] [ENCODER:10:DAC-10] [drm:pid10533:drm_mode_getresources] [ENCODER:14:TV-14] [drm:pid10533:drm_mode_getresources] [CONNECTOR:5:LVDS-1] [drm:pid10533:drm_mode_getresources] [CONNECTOR:9:VGA-1] [drm:pid10533:drm_mode_getresources] [CONNECTOR:13:SVIDEO-1] [drm:pid10533:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3] [drm:pid10533:drm_mode_getconnector] [CONNECTOR:5:?] [drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] [drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes : [drm:pid10533:drm_mode_debug_printmodeline] Modeline 28:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa [drm:pid10533:drm_mode_getconnector] [CONNECTOR:5:?] [drm:pid10533:drm_mode_getconnector] [CONNECTOR:9:?] [drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] [drm:pid10533:intel_crt_detect] CRT detected via hotplug [drm:pid10533:drm_edid_to_eld] ELD: no CEA Extension found [drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] probed modes : [drm:pid10533:drm_mode_debug_printmodeline] Modeline 30:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [drm:pid10533:drm_mode_debug_printmodeline] Modeline 35:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6 [drm:pid10533:drm_mode_debug_printmodeline] Modeline 33:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [drm:pid10533:drm_mode_debug_printmodeline] Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [drm:pid10533:drm_mode_debug_printmodeline] Modeline 32:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [drm:pid10533:drm_mode_debug_printmodeline] Modeline 31:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [drm:pid10533:drm_mode_debug_printmodeline] Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [drm:pid10533:drm_mode_debug_printmodeline] Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [drm:pid10533:drm_mode_debug_printmodeline] Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [drm:pid10533:drm_mode_debug_printmodeline] Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [drm:pid10533:drm_mode_getconnector] [CONNECTOR:9:?] [drm:pid10533:drm_mode_getconnector] [CONNECTOR:13:?] [drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1] [drm:pid10533:intel_get_load_detect_pipe] [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14] [drm:pid10533:intel_get_load_detect_pipe] no pipe available for load-detect [drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1] probed modes : [drm:pid10533:drm_mode_debug_printmodeline] Modeline 62:"848x480" 60 29027 848 849 912 944 480 481 512 513 0x48 0x0 [drm:pid10533:drm_mode_debug_printmodeline] Modeline 59:"640x480" 60 22631 640 641 704 736 480 481 512 513 0x48 0x0 [drm:pid10533:drm_mode_debug_printmodeline] Modeline 61:"1024x768" 60 53773 1024 1025 1088 1120 768 769 800 801 0x40 0x0 [drm:pid10533:drm_mode_debug_printmodeline] Modeline 60:"800x600" 60 33996 800 801 864 896 600 601 632 633 0x40 0x0 [drm:pid10533:drm_mode_getconnector] [CONNECTOR:13:?] [drm:pid10533:drm_mode_getconnector] [CONNECTOR:5:?] [drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] [drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes : [drm:pid10533:drm_mode_debug_printmodeline] Modeline 28:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa [drm:pid10533:drm_mode_getconnector] [CONNECTOR:5:?] [drm:pid10533:drm_mode_getconnector] [CONNECTOR:9:?] [drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] [drm:pid10533:intel_crt_detect] CRT detected via hotplug [drm:pid10533:drm_edid_to_eld] ELD: no CEA Extension found [drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] probed modes : [drm:pid10533:drm_mode_debug_printmodeline] Modeline 30:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [drm:pid10533:drm_mode_debug_printmodeline] Modeline 35:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6 [drm:pid10533:drm_mode_debug_printmodeline] Modeline 33:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [drm:pid10533:drm_mode_debug_printmodeline] Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [drm:pid10533:drm_mode_debug_printmodeline] Modeline 32:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [drm:pid10533:drm_mode_debug_printmodeline] Modeline 31:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [drm:pid10533:drm_mode_debug_printmodeline] Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [drm:pid10533:drm_mode_debug_printmodeline] Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [drm:pid10533:drm_mode_debug_printmodeline] Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [drm:pid10533:drm_mode_debug_printmodeline] Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [drm:pid10533:drm_mode_getconnector] [CONNECTOR:9:?] [drm:pid10533:drm_mode_getconnector] [CONNECTOR:13:?] [drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1] [drm:pid10533:intel_get_load_detect_pipe] [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14] [drm:pid10533:intel_get_load_detect_pipe] no pipe available for load-detect [drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1] probed modes : [drm:pid10533:drm_mode_debug_printmodeline] Modeline 62:"848x480" 60 29027 848 849 912 944 480 481 512 513 0x48 0x0 [drm:pid10533:drm_mode_debug_printmodeline] Modeline 59:"640x480" 60 22631 640 641 704 736 480 481 512 513 0x48 0x0 [drm:pid10533:drm_mode_debug_printmodeline] Modeline 61:"1024x768" 60 53773 1024 1025 1088 1120 768 769 800 801 0x40 0x0 [drm:pid10533:drm_mode_debug_printmodeline] Modeline 60:"800x600" 60 33996 800 801 864 896 600 601 632 633 0x40 0x0 [drm:pid10533:drm_mode_getconnector] [CONNECTOR:13:?] [drm:pid10533:intel_panel_actually_set_backlight] set backlight PWM = 15625 [drm:pid10533:intel_panel_actually_set_backlight] set backlight PWM = 15625 [drm:pid10533:drm_mode_addfb] [FB:79] [drm:pid10533:drm_mode_setcrtc] [CRTC:3] [drm:pid10533:drm_mode_setcrtc] [CONNECTOR:9:VGA-1] [drm:pid10533:intel_crtc_set_config] [CRTC:3] [FB:79] #connectors=1 (x y) (0 0) [drm:pid10533:intel_set_config_compute_mode_changes] modes are different, full mode set [drm:pid10533:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [drm:pid10533:drm_mode_debug_printmodeline] Modeline 80:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3] [drm:pid10533:intel_crtc_set_config] attempting to set mode from userspace [drm:pid10533:drm_mode_debug_printmodeline] Modeline 80:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa [drm:pid10533:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [drm:pid10533:intel_modeset_adjusted_mode] [CRTC:3] [drm:pid10533:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28 [drm:pid10533:intel_calculate_wm] FIFO entries required for mode: 21 [drm:pid10533:intel_calculate_wm] FIFO watermark level: 5 [drm:pid10533:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31 [drm:pid10533:i9xx_update_wm] FIFO watermarks - A: 5, B: 29 [drm:pid10533:i9xx_update_wm] self-refresh entries: 64 [drm:pid10533:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 29, C: 2, SR 63 [drm:pid10533:i9xx_update_wm] memory self refresh enabled [drm:pid10533:i9xx_crtc_mode_set] Mode for pipe A: [drm:pid10533:drm_mode_debug_printmodeline] Modeline 80:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa [drm:pid10533:i9xx_update_plane] Writing base 01400000 00000000 0 0 4096 [drm:pid10533:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28 [drm:pid10533:intel_calculate_wm] FIFO entries required for mode: 21 [drm:pid10533:intel_calculate_wm] FIFO watermark level: 5 [drm:pid10533:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31 [drm:pid10533:i9xx_update_wm] FIFO watermarks - A: 5, B: 29 [drm:pid10533:i9xx_update_wm] self-refresh entries: 64 [drm:pid10533:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 29, C: 2, SR 63 [drm:pid10533:i9xx_update_wm] memory self refresh enabled [drm:pid10533:intel_crtc_mode_set] [ENCODER:10:DAC-10] set [MODE:80:1024x768] [drm:pid10533:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28 [drm:pid10533:intel_calculate_wm] FIFO entries required for mode: 21 [drm:pid10533:intel_calculate_wm] FIFO watermark level: 5 [drm:pid10533:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31 [drm:pid10533:intel_calculate_wm] FIFO entries required for mode: 21 [drm:pid10533:intel_calculate_wm] FIFO watermark level: 8 [drm:pid10533:i9xx_update_wm] FIFO watermarks - A: 5, B: 8 [drm:pid10533:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 8, C: 2, SR 1 [drm:pid10533:i9xx_update_wm] memory self refresh disabled [drm:pid10533:intel_connector_check_state] [CONNECTOR:5:LVDS-1] [drm:pid10533:intel_connector_check_state] [CONNECTOR:9:VGA-1] [drm:pid10533:intel_modeset_check_state] [ENCODER:6:LVDS-6] [drm:pid10533:intel_modeset_check_state] [ENCODER:10:DAC-10] [drm:pid10533:intel_modeset_check_state] [ENCODER:14:TV-14] [drm:pid10533:intel_modeset_check_state] [CRTC:3] [drm:pid10533:intel_modeset_check_state] [CRTC:4] [drm:pid10533:drm_mode_setcrtc] [CRTC:4] [drm:pid10533:drm_mode_setcrtc] [CONNECTOR:5:LVDS-1] [drm:pid10533:intel_crtc_set_config] [CRTC:4] [FB:79] #connectors=1 (x y) (0 0) [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3] [drm:pid10533:i9xx_update_plane] Writing base 01400000 00000000 0 0 4096 [drm:pid10533:i915_getparam] Unknown parameter 19 [drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 3 to 3 [drm:pid10533:intel_crtc_cursor_set] cursor off [drm:pid10533:intel_crtc_cursor_set] cursor off [drm:pid4:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0) [drm:pid4:intel_set_config_compute_mode_changes] modes are different, full mode set [drm:pid4:drm_mode_debug_printmodeline] Modeline 80:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa [drm:pid4:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3] [drm:pid4:intel_crtc_set_config] attempting to set mode from userspace [drm:pid4:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [drm:pid4:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [drm:pid4:intel_modeset_adjusted_mode] [CRTC:3] [drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28 [drm:pid4:intel_calculate_wm] FIFO entries required for mode: 21 [drm:pid4:intel_calculate_wm] FIFO watermark level: 5 [drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31 [drm:pid4:i9xx_update_wm] FIFO watermarks - A: 5, B: 29 [drm:pid4:i9xx_update_wm] self-refresh entries: 64 [drm:pid4:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 29, C: 2, SR 63 [drm:pid4:i9xx_update_wm] memory self refresh enabled [drm:pid4:i9xx_crtc_mode_set] Mode for pipe A: [drm:pid4:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [drm:pid4:i9xx_update_plane] Writing base 007E0000 00000000 0 0 7680 [drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28 [drm:pid4:intel_calculate_wm] FIFO entries required for mode: 21 [drm:pid4:intel_calculate_wm] FIFO watermark level: 5 [drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31 [drm:pid4:i9xx_update_wm] FIFO watermarks - A: 5, B: 29 [drm:pid4:i9xx_update_wm] self-refresh entries: 64 [drm:pid4:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 29, C: 2, SR 63 [drm:pid4:i9xx_update_wm] memory self refresh enabled [drm:pid4:intel_crtc_mode_set] [ENCODER:10:DAC-10] set [MODE:43:1920x1200] [drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28 [drm:pid4:intel_calculate_wm] FIFO entries required for mode: 21 [drm:pid4:intel_calculate_wm] FIFO watermark level: 5 [drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31 [drm:pid4:intel_calculate_wm] FIFO entries required for mode: 49 [drm:pid4:intel_calculate_wm] FIFO watermark level: -20 [drm:pid4:i9xx_update_wm] FIFO watermarks - A: 5, B: 1 [drm:pid4:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 1, C: 2, SR 1 [drm:pid4:i9xx_update_wm] memory self refresh disabled [drm:pid4:intel_connector_check_state] [CONNECTOR:5:LVDS-1] [drm:pid4:intel_connector_check_state] [CONNECTOR:9:VGA-1] [drm:pid4:intel_modeset_check_state] [ENCODER:6:LVDS-6] [drm:pid4:intel_modeset_check_state] [ENCODER:10:DAC-10] [drm:pid4:intel_modeset_check_state] [ENCODER:14:TV-14] [drm:pid4:intel_modeset_check_state] [CRTC:3] [drm:pid4:intel_modeset_check_state] [CRTC:4] [drm:pid4:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0) [drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3] [drm:pid4:i9xx_update_plane] Writing base 007E0000 00000000 0 0 7680 [drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 3 to 3 [drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 3 to 3