>Synopsis: patches to add support for I/O DATA ETX-US2 usb ethernet
>adapter and fix wrong products name.
>Category: kernel documentation
>Environment:
System : OpenBSD 5.4
Details : OpenBSD 5.4 (GENERIC) #0: Mon Nov 4 03:27:59 JST 2013
[email protected]:/usr/src/sys/arch/landisk/compile/GENERIC
Architecture: OpenBSD.landisk
Machine : landisk
>Description:
5.4 does not support I/O DATA ETX-US2 ethernet adapter.
and I found a wrong I/O DATA products name.
cf. http://gnats.netbsd.org/cgi-bin/query-pr-single.pl?number=43040
>How-To-Repeat:
>Fix:
apply patches, please.
http://www.tunagu.gr.jp/~isihara/aue.4.patch
http://www.tunagu.gr.jp/~isihara/if_aue.c.patch
dmesg:
OpenBSD 5.4 (GENERIC) #0: Mon Nov 4 03:27:59 JST 2013
[email protected]:/usr/src/sys/arch/landisk/compile/GENERIC
SH4 SH7751R
real mem = 67108864 (64MB)
avail mem = 61845504 (58MB)
mainbus0 at root
cpu0 at mainbus0: HITACHI SH4 266.666 MHz PCLOCK 33.333 MHz
cpu0: 16KB/32B 2-way associative I-cache, 32KB/32B 2-way associative D-cache
shb0 at mainbus0
scif0 at shb0
scif0: console
rsclock0 at shb0: RS5C313 real time clock
shpcic0 at mainbus0: HITACHI SH7751R
pci0 at shpcic0
re0 at pci0 dev 0 function 0 "Realtek 8139" rev 0x20: RTL8139C+ (0x7480), irq
5, address 00:a0:b0:65:00:c6
rlphy0 at re0 phy 0: RTL internal PHY
ohci0 at pci0 dev 2 function 0 "NEC USB" rev 0x43: irq 7, version 1.0
ohci1 at pci0 dev 2 function 1 "NEC USB" rev 0x43: irq 8, version 1.0
ehci0 at pci0 dev 2 function 2 "NEC USB" rev 0x04: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1
obio0 at mainbus0
wdc0 at obio0 port 0x14000000-0x1400000f irq 10
wd0 at wdc0 channel 0 drive 0: <FLASH CARD>
wd0: 1-sector PIO, LBA, 3831MB, 7847280 sectors
wd0(wdc0:0:0): using BIOS timings
power0 at obio0 irq 11
umsm0 at uhub1 port 1 configuration 1 interface 0 "HUAWEI Technologies HUAWEI
Mobile Modem" rev 1.10/0.00 addr 2
ucom0 at umsm0
umsm1 at uhub1 port 1 configuration 1 interface 1 "HUAWEI Technologies HUAWEI
Mobile Modem" rev 1.10/0.00 addr 2
ucom1 at umsm1
umass0 at uhub1 port 1 configuration 1 interface 2 "HUAWEI Technologies HUAWEI
Mobile Modem" rev 1.10/0.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
cd0 at scsibus0 targ 1 lun 0: <HUAWEI, Mass Storage, 2.31> SCSI2 5/cdrom
removable
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a swap on wd0b dump on wd0b
usbdevs:
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), NEC(0x1033),
rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), NEC(0x1033),
rev 1.00
port 1 addr 2: full speed, power 500 mA, config 1, HUAWEI Mobile
Modem(0x1003), HUAWEI Technologies(0x12d1), rev 0.00
port 2 powered
port 3 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), NEC(0x1033),
rev 1.00
port 1 powered
port 2 powered
