Thanks, committed.
On Sun, Nov 17, 2013 at 10:33:36PM +0900, ishit wrote:
> My ETX-US2 is 0x092a.
>
> $ usbdevs -v
> Controller /dev/usb0:
> addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
> NEC(0x1033), rev 1.00
> port 1 powered
> port 2 powered
> port 3 powered
> port 4 addr 2: high speed, power 224 mA, config 1, I-O DATA
> ETX-US2(0x092a), I-O DATA DEVICE,INC.(0x04bb), rev 1.01, iSerialNumber
> 685AA5
> port 5 powered
> <snip>
>
> I fogot usbdevs.patch file.
> I am sorry.
>
> http://www.tunagu.gr.jp/~isihara/usbdevs.patch<http://www.tunagu.gr.jp/%7Eisihara/if_aue.c.patch>
>
>
> 2013/11/17 Jonathan Gray <j...@jsg.id.au>
>
> > What is the product number of this device?
> > NetBSD usbdevs has 0x092a, Linux has 0x093a and it isn't
> > included in your patches.
> >
> > On Sun, Nov 17, 2013 at 07:21:03AM +0900, is...@oak.dti.ne.jp wrote:
> > > >Synopsis: patches to add support for I/O DATA ETX-US2 usb ethernet
> > adapter and fix wrong products name.
> > > >Category: kernel documentation
> > > >Environment:
> > > System : OpenBSD 5.4
> > > Details : OpenBSD 5.4 (GENERIC) #0: Mon Nov 4 03:27:59 JST
> > 2013
> > > r...@ishitgw2.home
> > :/usr/src/sys/arch/landisk/compile/GENERIC
> > >
> > > Architecture: OpenBSD.landisk
> > > Machine : landisk
> > > >Description:
> > > 5.4 does not support I/O DATA ETX-US2 ethernet adapter.
> > > and I found a wrong I/O DATA products name.
> > >
> > > cf.
> > http://gnats.netbsd.org/cgi-bin/query-pr-single.pl?number=43040
> > > >How-To-Repeat:
> > >
> > > >Fix:
> > > apply patches, please.
> > > http://www.tunagu.gr.jp/~isihara/aue.4.patch
> > > http://www.tunagu.gr.jp/~isihara/if_aue.c.patch
> > >
> > >
> > > dmesg:
> > > OpenBSD 5.4 (GENERIC) #0: Mon Nov 4 03:27:59 JST 2013
> > > r...@ishitgw2.home:/usr/src/sys/arch/landisk/compile/GENERIC
> > > SH4 SH7751R
> > > real mem = 67108864 (64MB)
> > > avail mem = 61845504 (58MB)
> > > mainbus0 at root
> > > cpu0 at mainbus0: HITACHI SH4 266.666 MHz PCLOCK 33.333 MHz
> > > cpu0: 16KB/32B 2-way associative I-cache, 32KB/32B 2-way associative
> > D-cache
> > > shb0 at mainbus0
> > > scif0 at shb0
> > > scif0: console
> > > rsclock0 at shb0: RS5C313 real time clock
> > > shpcic0 at mainbus0: HITACHI SH7751R
> > > pci0 at shpcic0
> > > re0 at pci0 dev 0 function 0 "Realtek 8139" rev 0x20: RTL8139C+
> > (0x7480), irq 5, address 00:a0:b0:65:00:c6
> > > rlphy0 at re0 phy 0: RTL internal PHY
> > > ohci0 at pci0 dev 2 function 0 "NEC USB" rev 0x43: irq 7, version 1.0
> > > ohci1 at pci0 dev 2 function 1 "NEC USB" rev 0x43: irq 8, version 1.0
> > > ehci0 at pci0 dev 2 function 2 "NEC USB" rev 0x04: irq 5
> > > usb0 at ehci0: USB revision 2.0
> > > uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
> > > usb1 at ohci0: USB revision 1.0
> > > uhub1 at usb1 "NEC OHCI root hub" rev 1.00/1.00 addr 1
> > > usb2 at ohci1: USB revision 1.0
> > > uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1
> > > obio0 at mainbus0
> > > wdc0 at obio0 port 0x14000000-0x1400000f irq 10
> > > wd0 at wdc0 channel 0 drive 0: <FLASH CARD>
> > > wd0: 1-sector PIO, LBA, 3831MB, 7847280 sectors
> > > wd0(wdc0:0:0): using BIOS timings
> > > power0 at obio0 irq 11
> > > umsm0 at uhub1 port 1 configuration 1 interface 0 "HUAWEI Technologies
> > HUAWEI Mobile Modem" rev 1.10/0.00 addr 2
> > > ucom0 at umsm0
> > > umsm1 at uhub1 port 1 configuration 1 interface 1 "HUAWEI Technologies
> > HUAWEI Mobile Modem" rev 1.10/0.00 addr 2
> > > ucom1 at umsm1
> > > umass0 at uhub1 port 1 configuration 1 interface 2 "HUAWEI Technologies
> > HUAWEI Mobile Modem" rev 1.10/0.00 addr 2
> > > umass0: using SCSI over Bulk-Only
> > > scsibus0 at umass0: 2 targets, initiator 0
> > > cd0 at scsibus0 targ 1 lun 0: <HUAWEI, Mass Storage, 2.31> SCSI2 5/cdrom
> > removable
> > > vscsi0 at root
> > > scsibus1 at vscsi0: 256 targets
> > > softraid0 at root
> > > scsibus2 at softraid0: 256 targets
> > > root on wd0a swap on wd0b dump on wd0b
> > >
> > > usbdevs:
> > > Controller /dev/usb0:
> > > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
> > NEC(0x1033), rev 1.00
> > > port 1 powered
> > > port 2 powered
> > > port 3 powered
> > > port 4 powered
> > > port 5 powered
> > > Controller /dev/usb1:
> > > addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
> > NEC(0x1033), rev 1.00
> > > port 1 addr 2: full speed, power 500 mA, config 1, HUAWEI Mobile
> > Modem(0x1003), HUAWEI Technologies(0x12d1), rev 0.00
> > > port 2 powered
> > > port 3 powered
> > > Controller /dev/usb2:
> > > addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
> > NEC(0x1033), rev 1.00
> > > port 1 powered
> > > port 2 powered
> >
>
> --
> ISIHARA Takanori
