What is the product number of this device? NetBSD usbdevs has 0x092a, Linux has 0x093a and it isn't included in your patches.
On Sun, Nov 17, 2013 at 07:21:03AM +0900, [email protected] wrote: > >Synopsis: patches to add support for I/O DATA ETX-US2 usb ethernet > >adapter and fix wrong products name. > >Category: kernel documentation > >Environment: > System : OpenBSD 5.4 > Details : OpenBSD 5.4 (GENERIC) #0: Mon Nov 4 03:27:59 JST 2013 > > [email protected]:/usr/src/sys/arch/landisk/compile/GENERIC > > Architecture: OpenBSD.landisk > Machine : landisk > >Description: > 5.4 does not support I/O DATA ETX-US2 ethernet adapter. > and I found a wrong I/O DATA products name. > > cf. http://gnats.netbsd.org/cgi-bin/query-pr-single.pl?number=43040 > >How-To-Repeat: > > >Fix: > apply patches, please. > http://www.tunagu.gr.jp/~isihara/aue.4.patch > http://www.tunagu.gr.jp/~isihara/if_aue.c.patch > > > dmesg: > OpenBSD 5.4 (GENERIC) #0: Mon Nov 4 03:27:59 JST 2013 > [email protected]:/usr/src/sys/arch/landisk/compile/GENERIC > SH4 SH7751R > real mem = 67108864 (64MB) > avail mem = 61845504 (58MB) > mainbus0 at root > cpu0 at mainbus0: HITACHI SH4 266.666 MHz PCLOCK 33.333 MHz > cpu0: 16KB/32B 2-way associative I-cache, 32KB/32B 2-way associative D-cache > shb0 at mainbus0 > scif0 at shb0 > scif0: console > rsclock0 at shb0: RS5C313 real time clock > shpcic0 at mainbus0: HITACHI SH7751R > pci0 at shpcic0 > re0 at pci0 dev 0 function 0 "Realtek 8139" rev 0x20: RTL8139C+ (0x7480), irq > 5, address 00:a0:b0:65:00:c6 > rlphy0 at re0 phy 0: RTL internal PHY > ohci0 at pci0 dev 2 function 0 "NEC USB" rev 0x43: irq 7, version 1.0 > ohci1 at pci0 dev 2 function 1 "NEC USB" rev 0x43: irq 8, version 1.0 > ehci0 at pci0 dev 2 function 2 "NEC USB" rev 0x04: irq 5 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1 > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 "NEC OHCI root hub" rev 1.00/1.00 addr 1 > usb2 at ohci1: USB revision 1.0 > uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1 > obio0 at mainbus0 > wdc0 at obio0 port 0x14000000-0x1400000f irq 10 > wd0 at wdc0 channel 0 drive 0: <FLASH CARD> > wd0: 1-sector PIO, LBA, 3831MB, 7847280 sectors > wd0(wdc0:0:0): using BIOS timings > power0 at obio0 irq 11 > umsm0 at uhub1 port 1 configuration 1 interface 0 "HUAWEI Technologies HUAWEI > Mobile Modem" rev 1.10/0.00 addr 2 > ucom0 at umsm0 > umsm1 at uhub1 port 1 configuration 1 interface 1 "HUAWEI Technologies HUAWEI > Mobile Modem" rev 1.10/0.00 addr 2 > ucom1 at umsm1 > umass0 at uhub1 port 1 configuration 1 interface 2 "HUAWEI Technologies > HUAWEI Mobile Modem" rev 1.10/0.00 addr 2 > umass0: using SCSI over Bulk-Only > scsibus0 at umass0: 2 targets, initiator 0 > cd0 at scsibus0 targ 1 lun 0: <HUAWEI, Mass Storage, 2.31> SCSI2 5/cdrom > removable > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on wd0a swap on wd0b dump on wd0b > > usbdevs: > Controller /dev/usb0: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > NEC(0x1033), rev 1.00 > port 1 powered > port 2 powered > port 3 powered > port 4 powered > port 5 powered > Controller /dev/usb1: > addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), > NEC(0x1033), rev 1.00 > port 1 addr 2: full speed, power 500 mA, config 1, HUAWEI Mobile > Modem(0x1003), HUAWEI Technologies(0x12d1), rev 0.00 > port 2 powered > port 3 powered > Controller /dev/usb2: > addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), > NEC(0x1033), rev 1.00 > port 1 powered > port 2 powered
