I just upgraded to the latest snapshot from Feb, 7. and I'm experiencing a regression, where X11 doesn't detect the HDMI output when available.
I've a dual-head configuration, where one VGA and one DVI monitor is connected to a docking station of my Thinkpad T400. The VGA works, but HDMI stays dark. Just before I upgraded from a snapshot from Feb, 2. to this snapshot, everything worked fine. Below you'll find the output of xrandr, /var/log/Xorg.0.log, pcidump, dmesg. Please let me know if I can provide more information or test patches, etc.! xrandr: Screen 0: minimum 320 x 200, current 1440 x 1024, maximum 32767 x 32767 LVDS1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 304mm x 190mm 1440x900 60.2*+ 50.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm 1280x1024 60.0 + 76.0* 75.0 72.0 1152x864 75.0 1024x768 75.1 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 640x480 72.8 66.7 60.0 720x400 70.1 640x350 70.1 HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) HDMI2 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) DP3 disconnected (normal left inverted right x axis y axis) VIRTUAL1 disconnected (normal left inverted right x axis y axis) /var/log/Xorg.0.log: [ 18.823] (--) checkDevMem: using aperture driver /dev/xf86 [ 18.835] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32) [ 18.900] X.Org X Server 1.14.5 Release Date: 2013-12-12 [ 18.900] X Protocol Version 11, Revision 0 [ 18.900] Build Operating System: OpenBSD 5.5 amd64 [ 18.900] Current Operating System: OpenBSD theos.my.domain 5.5 GENERIC.MP#287 amd64 [ 18.900] Build Date: 07 February 2014 11:24:44AM [ 18.900] [ 18.900] Current version of pixman: 0.32.4 [ 18.900] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 18.900] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 18.901] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 10 12:35:40 2014 [ 18.915] (==) Using config file: "/etc/X11/xorg.conf" [ 18.915] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d" [ 18.940] (==) No Layout section. Using the first Screen section. [ 18.940] (**) |-->Screen "Screen0" (0) [ 18.940] (**) | |-->Monitor "<default monitor>" [ 18.941] (**) | |-->Device "Card0" [ 18.941] (==) No monitor specified for screen "Screen0". Using a default monitor configuration. [ 18.941] (==) Disabling SIGIO handlers for input devices [ 18.941] (==) Automatically adding devices [ 18.941] (==) Automatically enabling devices [ 18.941] (==) Not automatically adding GPU devices [ 19.089] (**) FontPath set to: /usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/TTF/, /usr/X11R6/lib/X11/fonts/OTF/, /usr/X11R6/lib/X11/fonts/Type1/, /usr/X11R6/lib/X11/fonts/100dpi/, /usr/X11R6/lib/X11/fonts/75dpi/, /usr/local/lib/X11/fonts/terminus/, /usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/TTF/, /usr/X11R6/lib/X11/fonts/OTF/, /usr/X11R6/lib/X11/fonts/Type1/, /usr/X11R6/lib/X11/fonts/100dpi/, /usr/X11R6/lib/X11/fonts/75dpi/ [ 19.089] (**) ModulePath set to "/usr/X11R6/lib/modules" [ 19.089] (II) The server relies on wscons to provide the list of input devices. If no devices become available, reconfigure wscons or disable AutoAddDevices. [ 19.101] (II) Loader magic: 0x1485fe5ec040 [ 19.101] (II) Module ABI versions: [ 19.101] X.Org ANSI C Emulation: 0.4 [ 19.101] X.Org Video Driver: 14.1 [ 19.101] X.Org XInput driver : 19.1 [ 19.101] X.Org Server Extension : 7.0 [ 19.102] (--) PCI:*(0:0:2:0) 8086:2a42:17aa:20e4 rev 7, Mem @ 0xf4400000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8 [ 19.102] (--) PCI: (0:0:2:1) 8086:2a43:17aa:20e4 rev 7, Mem @ 0xf4200000/1048576 [ 19.102] Initializing built-in extension Generic Event Extension [ 19.102] Initializing built-in extension SHAPE [ 19.102] Initializing built-in extension MIT-SHM [ 19.102] Initializing built-in extension XInputExtension [ 19.102] Initializing built-in extension XTEST [ 19.102] Initializing built-in extension BIG-REQUESTS [ 19.102] Initializing built-in extension SYNC [ 19.102] Initializing built-in extension XKEYBOARD [ 19.102] Initializing built-in extension XC-MISC [ 19.102] Initializing built-in extension SECURITY [ 19.102] Initializing built-in extension XINERAMA [ 19.102] Initializing built-in extension XFIXES [ 19.102] Initializing built-in extension RENDER [ 19.102] Initializing built-in extension RANDR [ 19.102] Initializing built-in extension COMPOSITE [ 19.102] Initializing built-in extension DAMAGE [ 19.102] Initializing built-in extension MIT-SCREEN-SAVER [ 19.102] Initializing built-in extension DOUBLE-BUFFER [ 19.102] Initializing built-in extension RECORD [ 19.102] Initializing built-in extension DPMS [ 19.102] Initializing built-in extension X-Resource [ 19.102] Initializing built-in extension XVideo [ 19.102] Initializing built-in extension XVideo-MotionCompensation [ 19.102] Initializing built-in extension XFree86-VidModeExtension [ 19.102] Initializing built-in extension XFree86-DGA [ 19.103] Initializing built-in extension XFree86-DRI [ 19.103] Initializing built-in extension DRI2 [ 19.103] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 19.103] (II) LoadModule: "dbe" [ 19.103] (II) Module "dbe" already built-in [ 19.103] (II) LoadModule: "dri" [ 19.103] (II) Module "dri" already built-in [ 19.103] (II) LoadModule: "dri2" [ 19.103] (II) Module "dri2" already built-in [ 19.103] (II) LoadModule: "extmod" [ 19.103] (II) Module "extmod" already built-in [ 19.103] (II) LoadModule: "glx" [ 19.124] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so [ 19.147] (II) Module glx: vendor="X.Org Foundation" [ 19.147] compiled for 1.14.5, module version = 1.0.0 [ 19.147] ABI class: X.Org Server Extension, version 7.0 [ 19.147] (==) AIGLX enabled [ 19.148] Loading extension GLX [ 19.148] (II) LoadModule: "record" [ 19.148] (II) Module "record" already built-in [ 19.148] (II) LoadModule: "intel" [ 19.148] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so [ 19.184] (II) Module intel: vendor="X.Org Foundation" [ 19.184] compiled for 1.14.5, module version = 2.99.909 [ 19.184] Module class: X.Org Video Driver [ 19.184] ABI class: X.Org Video Driver, version 14.1 [ 19.184] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 19.184] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000 [ 19.184] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100 [ 19.184] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200 [ 19.205] (--) intel(0): Integrated Graphics Chipset: Intel(R) GM45 [ 19.205] (--) intel(0): CPU: x86-64 [ 19.205] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 19.206] (==) intel(0): RGB weight 888 [ 19.206] (==) intel(0): Default visual is TrueColor [ 19.214] (**) intel(0): Framebuffer tiled [ 19.214] (**) intel(0): Pixmaps tiled [ 19.214] (**) intel(0): "Tear free" disabled [ 19.214] (**) intel(0): Forcing per-crtc-pixmaps? no [ 19.216] (II) intel(0): Output LVDS1 has no monitor section [ 19.216] (II) intel(0): Output VGA1 has no monitor section [ 19.216] (II) intel(0): Output HDMI1 has no monitor section [ 19.216] (II) intel(0): Output DP1 has no monitor section [ 19.216] (II) intel(0): Output HDMI2 has no monitor section [ 19.216] (II) intel(0): Output DP2 has no monitor section [ 19.216] (II) intel(0): Output DP3 has no monitor section [ 19.216] (II) intel(0): Output VIRTUAL1 has no monitor section [ 19.217] (II) intel(0): EDID for output LVDS1 [ 19.217] (II) intel(0): Manufacturer: LEN Model: 4036 Serial#: 0 [ 19.217] (II) intel(0): Year: 2008 Week: 0 [ 19.217] (II) intel(0): EDID Version: 1.3 [ 19.217] (II) intel(0): Digital Display Input [ 19.217] (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 19 [ 19.217] (II) intel(0): Gamma: 2.20 [ 19.217] (II) intel(0): DPMS capabilities: StandBy Suspend Off [ 19.217] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 19.217] (II) intel(0): First detailed timing is preferred mode [ 19.217] (II) intel(0): redX: 0.571 redY: 0.340 greenX: 0.338 greenY: 0.542 [ 19.217] (II) intel(0): blueX: 0.158 blueY: 0.125 whiteX: 0.313 whiteY: 0.329 [ 19.217] (II) intel(0): Manufacturer's mask: 0 [ 19.217] (II) intel(0): Supported detailed timing: [ 19.217] (II) intel(0): clock: 101.6 MHz Image Size: 304 x 190 mm [ 19.217] (II) intel(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1824 h_border: 0 [ 19.217] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0 [ 19.217] (II) intel(0): Supported detailed timing: [ 19.217] (II) intel(0): clock: 85.6 MHz Image Size: 304 x 190 mm [ 19.217] (II) intel(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1848 h_border: 0 [ 19.217] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0 [ 19.217] (II) intel(0): Unknown vendor-specific block f [ 19.217] (II) intel(0): LP141WP2-TLB1 [ 19.217] (II) intel(0): EDID (in hex): [ 19.217] (II) intel(0): 00ffffffffffff0030ae364000000000 [ 19.217] (II) intel(0): 00120103801e1378ea4b859257568a28 [ 19.217] (II) intel(0): 20505400000001010101010101010101 [ 19.217] (II) intel(0): 010101010101b027a08051841a303020 [ 19.217] (II) intel(0): 360030be100000197021a09851841a30 [ 19.217] (II) intel(0): 3020360030be100000190000000f0095 [ 19.217] (II) intel(0): 0a32950a28191900320c3c01000000fe [ 19.217] (II) intel(0): 004c503134315750322d544c4231001f [ 19.218] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 19.218] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 19.218] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 19.218] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 19.218] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 19.218] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 19.218] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 19.218] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 19.218] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 19.218] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 19.218] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 19.218] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 19.218] (II) intel(0): Printing probed modes for output LVDS1 [ 19.218] (II) intel(0): Modeline "1440x900"x60.2 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz eP) [ 19.218] (II) intel(0): Modeline "1440x900"x50.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz e) [ 19.218] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 19.218] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 19.218] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 19.218] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 19.251] (II) intel(0): EDID for output VGA1 [ 19.251] (II) intel(0): Manufacturer: BNQ Model: 76c7 Serial#: 7090 [ 19.251] (II) intel(0): Year: 2007 Week: 29 [ 19.251] (II) intel(0): EDID Version: 1.3 [ 19.251] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 19.251] (II) intel(0): Sync: Separate Composite [ 19.251] (II) intel(0): Max Image Size [cm]: horiz.: 38 vert.: 30 [ 19.251] (II) intel(0): Gamma: 2.20 [ 19.251] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 19.251] (II) intel(0): First detailed timing is preferred mode [ 19.251] (II) intel(0): redX: 0.640 redY: 0.340 greenX: 0.290 greenY: 0.610 [ 19.251] (II) intel(0): blueX: 0.140 blueY: 0.070 whiteX: 0.310 whiteY: 0.330 [ 19.251] (II) intel(0): Supported established timings: [ 19.251] (II) intel(0): 720x400@70Hz [ 19.252] (II) intel(0): 640x480@60Hz [ 19.252] (II) intel(0): 640x480@67Hz [ 19.252] (II) intel(0): 640x480@72Hz [ 19.252] (II) intel(0): 640x480@75Hz [ 19.252] (II) intel(0): 800x600@60Hz [ 19.252] (II) intel(0): 800x600@72Hz [ 19.252] (II) intel(0): 800x600@75Hz [ 19.252] (II) intel(0): 832x624@75Hz [ 19.252] (II) intel(0): 1024x768@60Hz [ 19.252] (II) intel(0): 1024x768@70Hz [ 19.252] (II) intel(0): 1024x768@75Hz [ 19.252] (II) intel(0): 1280x1024@75Hz [ 19.252] (II) intel(0): 1152x864@75Hz [ 19.252] (II) intel(0): Manufacturer's mask: 0 [ 19.252] (II) intel(0): Supported standard timings: [ 19.252] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 19.252] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 76 vid: 36993 [ 19.252] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 19.252] (II) intel(0): #3: hsize: 1280 vsize 1024 refresh: 72 vid: 35969 [ 19.252] (II) intel(0): Supported detailed timing: [ 19.252] (II) intel(0): clock: 108.0 MHz Image Size: 376 x 301 mm [ 19.252] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 [ 19.252] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 [ 19.252] (II) intel(0): Supported detailed timing: [ 19.252] (II) intel(0): clock: 25.2 MHz Image Size: 376 x 301 mm [ 19.252] (II) intel(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0 [ 19.252] (II) intel(0): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking: 449 v_border: 0 [ 19.252] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 145 MHz [ 19.252] (II) intel(0): Monitor name: BenQ FP93G [ 19.252] (II) intel(0): EDID (in hex): [ 19.252] (II) intel(0): 00ffffffffffff0009d1c776b21b0000 [ 19.252] (II) intel(0): 1d1101036c261e78eac5c6a3574a9c23 [ 19.252] (II) intel(0): 124f54bdef80714f81908180818c0101 [ 19.252] (II) intel(0): 010101010101302a009851002a403070 [ 19.252] (II) intel(0): 1300782d1100001ed50980a0205e6310 [ 19.252] (II) intel(0): 10605208782d1100001a000000fd0038 [ 19.252] (II) intel(0): 4c1f530e000a202020202020000000fc [ 19.252] (II) intel(0): 0042656e512046503933470a202000eb [ 19.252] (II) intel(0): Printing probed modes for output VGA1 [ 19.252] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz UeP) [ 19.252] (II) intel(0): Modeline "1280x1024"x76.0 141.81 1280 1376 1512 1744 1024 1025 1028 1070 -hsync +vsync (81.3 kHz) [ 19.252] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 19.252] (II) intel(0): Modeline "1280x1024"x72.0 132.84 1280 1368 1504 1728 1024 1025 1028 1067 -hsync +vsync (76.9 kHz) [ 19.252] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 19.252] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 19.252] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 19.252] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 19.252] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 19.252] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 19.252] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 19.252] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 19.252] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e) [ 19.252] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 19.252] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 19.252] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 19.252] (II) intel(0): Modeline "640x350"x70.1 25.17 640 656 752 800 350 387 389 449 +hsync -vsync (31.5 kHz e) [ 19.302] (II) intel(0): EDID for output HDMI1 [ 19.313] (II) intel(0): EDID for output DP1 [ 19.314] (II) intel(0): EDID for output HDMI2 [ 19.324] (II) intel(0): EDID for output DP2 [ 19.335] (II) intel(0): EDID for output DP3 [ 19.335] (II) intel(0): EDID for output VIRTUAL1 [ 19.335] (II) intel(0): Output LVDS1 connected [ 19.335] (II) intel(0): Output VGA1 connected [ 19.335] (II) intel(0): Output HDMI1 disconnected [ 19.335] (II) intel(0): Output DP1 disconnected [ 19.335] (II) intel(0): Output HDMI2 disconnected [ 19.335] (II) intel(0): Output DP2 disconnected [ 19.335] (II) intel(0): Output DP3 disconnected [ 19.335] (II) intel(0): Output VIRTUAL1 disconnected [ 19.335] (II) intel(0): Using user preference for initial modes [ 19.335] (II) intel(0): Output LVDS1 using initial mode 1440x900 [ 19.335] (II) intel(0): Output VGA1 using initial mode 1280x1024 [ 19.335] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 19.335] (==) intel(0): DPI set to (96, 96) [ 19.335] (II) Loading sub module "dri2" [ 19.335] (II) LoadModule: "dri2" [ 19.335] (II) Module "dri2" already built-in [ 19.335] (==) Depth 24 pixmap format is 32 bpp [ 19.357] (II) intel(0): SNA initialized with Eaglelake (gen4.5) backend [ 19.357] (==) intel(0): Backing store disabled [ 19.357] (==) intel(0): Silken mouse disabled [ 19.359] (II) intel(0): HW Cursor enabled [ 19.359] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 19.367] (==) intel(0): DPMS enabled [ 19.372] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 19.374] (II) intel(0): [DRI2] Setup complete [ 19.374] (II) intel(0): [DRI2] DRI driver: i965 [ 19.374] (II) intel(0): [DRI2] VDPAU driver: i965 [ 19.374] (II) intel(0): direct rendering: DRI2 Enabled [ 19.374] (--) RandR disabled [ 19.492] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 19.492] (II) AIGLX: enabled GLX_INTEL_swap_event [ 19.492] (II) AIGLX: enabled GLX_ARB_create_context [ 19.492] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 19.492] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 19.492] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 19.492] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 19.501] (II) AIGLX: Loaded and initialized i965 [ 19.501] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 19.526] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none [ 19.545] (II) intel(0): switch to mode [email protected] on VGA1 using pipe 1, position (0, 0), rotation normal, reflection none [ 19.550] (II) intel(0): Setting screen physical size to 381 x 270 [ 20.133] (II) config/wscons: checking input device /dev/wskbd [ 20.133] (II) wskbd: using layout us [ 20.133] (II) LoadModule: "kbd" [ 20.141] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so [ 20.152] (II) Module kbd: vendor="X.Org Foundation" [ 20.152] compiled for 1.14.5, module version = 1.8.0 [ 20.152] Module class: X.Org XInput Driver [ 20.152] ABI class: X.Org XInput driver, version 19.1 [ 20.152] (II) Using input driver 'kbd' for '/dev/wskbd' [ 20.152] (**) /dev/wskbd: always reports core events [ 20.152] (**) /dev/wskbd: always reports core events [ 20.152] (**) Option "Protocol" "standard" [ 20.152] (**) Option "XkbRules" "base" [ 20.152] (**) Option "XkbModel" "pc105" [ 20.152] (**) Option "XkbLayout" "us" [ 20.152] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6) [ 21.251] (II) config/wscons: checking input device /dev/wsmouse [ 21.251] (II) LoadModule: "ws" [ 21.285] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so [ 21.296] (II) Module ws: vendor="X.Org Foundation" [ 21.296] compiled for 1.14.5, module version = 1.3.0 [ 21.296] Module class: X.Org XInput Driver [ 21.296] ABI class: X.Org XInput driver, version 19.1 [ 21.296] (II) Using input driver 'ws' for '/dev/wsmouse' [ 21.296] (**) /dev/wsmouse: always reports core events [ 21.296] (II) ws: /dev/wsmouse: debuglevel 0 [ 21.296] (**) Option "Device" "/dev/wsmouse" [ 21.296] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5 [ 21.296] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7 [ 21.296] (**) ws: /dev/wsmouse: associated screen: 0 [ 22.357] (II) ws: /dev/wsmouse: minimum x position: 0 [ 22.357] (II) ws: /dev/wsmouse: maximum x position: 1439 [ 22.357] (II) ws: /dev/wsmouse: minimum y position: 0 [ 22.357] (II) ws: /dev/wsmouse: maximum y position: 1023 [ 22.357] (==) ws: /dev/wsmouse: Buttons: 7 [ 22.360] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5 [ 22.360] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 7) [ 23.413] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1 [ 23.413] (**) /dev/wsmouse: (accel) acceleration profile 0 [ 23.413] (**) /dev/wsmouse: (accel) acceleration factor: 2.000 [ 23.413] (**) /dev/wsmouse: (accel) acceleration threshold: 4 [ 155.739] (II) intel(0): switch to mode [email protected] on VGA1 using pipe 1, position (0, 0), rotation normal, reflection none pcidump: Domain /dev/pci0: 0:0:0: Intel GM45 Host 0x0000: Vendor ID: 8086 Product ID: 2a40 0x0004: Command: 0106 Status: 2090 0x0008: Class: 06 Subclass: 00 Interface: 00 Revision: 07 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR empty (00000000) 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 17aa Product ID: 20e0 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00 0x00e0: Capability 0x09: Vendor Specific 0:2:0: Intel GM45 Video 0x0000: Vendor ID: 8086 Product ID: 2a42 0x0004: Command: 0007 Status: 0090 0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: 07 0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR mem 64bit addr: 0x00000000f4400000/0x00400000 0x0018: BAR mem prefetchable 64bit addr: 0x00000000d0000000/0x10000000 0x0020: BAR io addr: 0x00001800/0x0008 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 17aa Product ID: 20e4 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00 0x0090: Capability 0x05: Message Signaled Interrupts (MSI) 0x00d0: Capability 0x01: Power Management 0:2:1: Intel GM45 Video 0x0000: Vendor ID: 8086 Product ID: 2a43 0x0004: Command: 0007 Status: 0090 0x0008: Class: 03 Subclass: 80 Interface: 00 Revision: 07 0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR mem 64bit addr: 0x00000000f4200000/0x00100000 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 17aa Product ID: 20e4 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00 0x00d0: Capability 0x01: Power Management 0:3:0: Intel GM45 HECI 0x0000: Vendor ID: 8086 Product ID: 2a44 0x0004: Command: 0006 Status: 0018 0x0008: Class: 07 Subclass: 80 Interface: 00 Revision: 07 0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR mem 64bit addr: 0x00000000fc226800/0x00000010 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 17aa Product ID: 20e6 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00 0x0050: Capability 0x01: Power Management 0x008c: Capability 0x05: Message Signaled Interrupts (MSI) 0:25:0: Intel ICH9 IGP M AMT 0x0000: Vendor ID: 8086 Product ID: 10f5 0x0004: Command: 0107 Status: 0010 0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 03 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR mem 32bit addr: 0xfc000000/0x00020000 0x0014: BAR mem 32bit addr: 0xfc025000/0x00001000 0x0018: BAR io addr: 0x00001840/0x0020 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 17aa Product ID: 20ee 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00 0x00c8: Capability 0x01: Power Management 0x00d0: Capability 0x05: Message Signaled Interrupts (MSI) 0x00e0: Capability 0x13: PCI Advanced Features 0:26:0: Intel 82801I USB 0x0000: Vendor ID: 8086 Product ID: 2937 0x0004: Command: 0005 Status: 0290 0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 03 0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR empty (00000000) 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR io addr: 0x00001860/0x0020 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 17aa Product ID: 20f0 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00 0x0050: Capability 0x13: PCI Advanced Features 0:26:1: Intel 82801I USB 0x0000: Vendor ID: 8086 Product ID: 2938 0x0004: Command: 0005 Status: 0290 0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 03 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR empty (00000000) 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR io addr: 0x00001880/0x0020 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 17aa Product ID: 20f0 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 02 Line: 0b Min Gnt: 00 Max Lat: 00 0x0050: Capability 0x13: PCI Advanced Features 0:26:2: Intel 82801I USB 0x0000: Vendor ID: 8086 Product ID: 2939 0x0004: Command: 0005 Status: 0290 0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 03 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR empty (00000000) 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR io addr: 0x000018a0/0x0020 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 17aa Product ID: 20f0 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 03 Line: 0b Min Gnt: 00 Max Lat: 00 0x0050: Capability 0x13: PCI Advanced Features 0:26:7: Intel 82801I USB 0x0000: Vendor ID: 8086 Product ID: 293c 0x0004: Command: 0106 Status: 0290 0x0008: Class: 0c Subclass: 03 Interface: 20 Revision: 03 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR mem 32bit addr: 0xfc226c00/0x00000400 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 17aa Product ID: 20f1 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 04 Line: 0b Min Gnt: 00 Max Lat: 00 0x0050: Capability 0x01: Power Management 0x0058: Capability 0x0a: Debug Port 0x0098: Capability 0x13: PCI Advanced Features 0:27:0: Intel 82801I HD Audio 0x0000: Vendor ID: 8086 Product ID: 293e 0x0004: Command: 0106 Status: 0010 0x0008: Class: 04 Subclass: 03 Interface: 00 Revision: 03 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10 0x0010: BAR mem 64bit addr: 0x00000000fc020000/0x00004000 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 17aa Product ID: 20f2 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 02 Line: 0b Min Gnt: 00 Max Lat: 00 0x0050: Capability 0x01: Power Management 0x0060: Capability 0x05: Message Signaled Interrupts (MSI) 0x0070: Capability 0x10: PCI Express 0:28:0: Intel 82801I PCIE 0x0000: Vendor ID: 8086 Product ID: 2940 0x0004: Command: 0107 Status: 0010 0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 03 0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10 0x0010: 00000000 0x0014: 00000000 0x0018: Primary Bus: 0 Secondary Bus: 2 Subordinate Bus: 2 Secondary Latency Timer: 00 0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 2000 0x0020: Memory Base: fff0 Memory Limit: 0000 0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000 0x0038: Expansion ROM Base Address: 00000000 0x003c: Interrupt Pin: 01 Line: 0b Bridge Control: 0004 0x0040: Capability 0x10: PCI Express Link Speed: 2.5 / 2.5 GT/s Link Width: x0 / x1 0x0080: Capability 0x05: Message Signaled Interrupts (MSI) 0x0090: Capability 0x0d: PCI-PCI 0x00a0: Capability 0x01: Power Management 0:28:1: Intel 82801I PCIE 0x0000: Vendor ID: 8086 Product ID: 2942 0x0004: Command: 0107 Status: 0010 0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 03 0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10 0x0010: 00000000 0x0014: 00000000 0x0018: Primary Bus: 0 Secondary Bus: 3 Subordinate Bus: 3 Secondary Latency Timer: 00 0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 2000 0x0020: Memory Base: f430 Memory Limit: f430 0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000 0x0038: Expansion ROM Base Address: 00000000 0x003c: Interrupt Pin: 02 Line: 0b Bridge Control: 0004 0x0040: Capability 0x10: PCI Express Link Speed: 2.5 / 2.5 GT/s Link Width: x1 / x1 0x0080: Capability 0x05: Message Signaled Interrupts (MSI) 0x0090: Capability 0x0d: PCI-PCI 0x00a0: Capability 0x01: Power Management 0:28:3: Intel 82801I PCIE 0x0000: Vendor ID: 8086 Product ID: 2946 0x0004: Command: 0107 Status: 0010 0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 03 0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10 0x0010: 00000000 0x0014: 00000000 0x0018: Primary Bus: 0 Secondary Bus: 5 Subordinate Bus: 12 Secondary Latency Timer: 00 0x001c: I/O Base: 20 I/O Limit: 20 Secondary Status: 2000 0x0020: Memory Base: f800 Memory Limit: f9f0 0x0024: Prefetch Memory Base: f401 Prefetch Memory Limit: f401 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000 0x0038: Expansion ROM Base Address: 00000000 0x003c: Interrupt Pin: 04 Line: 0b Bridge Control: 0004 0x0040: Capability 0x10: PCI Express Link Speed: 2.5 / 2.5 GT/s Link Width: x0 / x1 0x0080: Capability 0x05: Message Signaled Interrupts (MSI) 0x0090: Capability 0x0d: PCI-PCI 0x00a0: Capability 0x01: Power Management 0:28:4: Intel 82801I PCIE 0x0000: Vendor ID: 8086 Product ID: 2948 0x0004: Command: 0107 Status: 0010 0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 03 0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10 0x0010: 00000000 0x0014: 00000000 0x0018: Primary Bus: 0 Secondary Bus: 13 Subordinate Bus: 20 Secondary Latency Timer: 00 0x001c: I/O Base: 30 I/O Limit: 30 Secondary Status: 2000 0x0020: Memory Base: fa00 Memory Limit: fbf0 0x0024: Prefetch Memory Base: f411 Prefetch Memory Limit: f411 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000 0x0038: Expansion ROM Base Address: 00000000 0x003c: Interrupt Pin: 01 Line: 0b Bridge Control: 0004 0x0040: Capability 0x10: PCI Express Link Speed: 2.5 / 2.5 GT/s Link Width: x0 / x1 0x0080: Capability 0x05: Message Signaled Interrupts (MSI) 0x0090: Capability 0x0d: PCI-PCI 0x00a0: Capability 0x01: Power Management 0:29:0: Intel 82801I USB 0x0000: Vendor ID: 8086 Product ID: 2934 0x0004: Command: 0005 Status: 0290 0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 03 0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR empty (00000000) 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR io addr: 0x000018c0/0x0020 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 17aa Product ID: 20f0 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00 0x0050: Capability 0x13: PCI Advanced Features 0:29:1: Intel 82801I USB 0x0000: Vendor ID: 8086 Product ID: 2935 0x0004: Command: 0005 Status: 0290 0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 03 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR empty (00000000) 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR io addr: 0x000018e0/0x0020 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 17aa Product ID: 20f0 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 02 Line: 0b Min Gnt: 00 Max Lat: 00 0x0050: Capability 0x13: PCI Advanced Features 0:29:2: Intel 82801I USB 0x0000: Vendor ID: 8086 Product ID: 2936 0x0004: Command: 0005 Status: 0290 0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 03 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR empty (00000000) 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR io addr: 0x00001c00/0x0020 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 17aa Product ID: 20f0 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 03 Line: 0b Min Gnt: 00 Max Lat: 00 0x0050: Capability 0x13: PCI Advanced Features 0:29:7: Intel 82801I USB 0x0000: Vendor ID: 8086 Product ID: 293a 0x0004: Command: 0106 Status: 0290 0x0008: Class: 0c Subclass: 03 Interface: 20 Revision: 03 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR mem 32bit addr: 0xfc227000/0x00000400 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 17aa Product ID: 20f1 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 04 Line: 0b Min Gnt: 00 Max Lat: 00 0x0050: Capability 0x01: Power Management 0x0058: Capability 0x0a: Debug Port 0x0098: Capability 0x13: PCI Advanced Features 0:30:0: Intel 82801BAM Hub-to-PCI 0x0000: Vendor ID: 8086 Product ID: 2448 0x0004: Command: 0107 Status: 0010 0x0008: Class: 06 Subclass: 04 Interface: 01 Revision: 93 0x000c: BIST: 00 Header Type: 01 Latency Timer: 00 Cache Line Size: 00 0x0010: 00000000 0x0014: 00000000 0x0018: Primary Bus: 0 Secondary Bus: 21 Subordinate Bus: 24 Secondary Latency Timer: 20 0x001c: I/O Base: 40 I/O Limit: 70 Secondary Status: 2280 0x0020: Memory Base: f480 Memory Limit: f7f0 0x0024: Prefetch Memory Base: f001 Prefetch Memory Limit: f3f1 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000 0x0038: Expansion ROM Base Address: 00000000 0x003c: Interrupt Pin: 00 Line: ff Bridge Control: 0004 0x0050: Capability 0x0d: PCI-PCI 0:31:0: Intel 82801IEM LPC 0x0000: Vendor ID: 8086 Product ID: 2917 0x0004: Command: 0007 Status: 0210 0x0008: Class: 06 Subclass: 01 Interface: 00 Revision: 03 0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR empty (00000000) 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 17aa Product ID: 20f5 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00 0x00e0: Capability 0x09: Vendor Specific 0:31:2: Intel 82801I AHCI 0x0000: Vendor ID: 8086 Product ID: 2929 0x0004: Command: 0007 Status: 02b0 0x0008: Class: 01 Subclass: 06 Interface: 01 Revision: 03 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR io addr: 0x00001c48/0x0008 0x0014: BAR io addr: 0x0000183c/0x0004 0x0018: BAR io addr: 0x00001c40/0x0008 0x001c: BAR io addr: 0x00001838/0x0004 0x0020: BAR io addr: 0x00001c20/0x0020 0x0024: BAR mem 32bit addr: 0xfc226000/0x00000800 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 17aa Product ID: 20f8 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 02 Line: 0b Min Gnt: 00 Max Lat: 00 0x0080: Capability 0x05: Message Signaled Interrupts (MSI) 0x0070: Capability 0x01: Power Management 0x00a8: Capability 0x12: SATA 0x00b0: Capability 0x13: PCI Advanced Features 0:31:3: Intel 82801I SMBus 0x0000: Vendor ID: 8086 Product ID: 2930 0x0004: Command: 0103 Status: 0280 0x0008: Class: 0c Subclass: 05 Interface: 00 Revision: 03 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR mem 64bit addr: 0x00000000fc227400/0x00000100 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR io addr: 0x00001c60/0x0020 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 17aa Product ID: 20f9 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00 3:0:0: Intel WiFi Link 5300 0x0000: Vendor ID: 8086 Product ID: 4236 0x0004: Command: 0106 Status: 0010 0x0008: Class: 02 Subclass: 80 Interface: 00 Revision: 00 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10 0x0010: BAR mem 64bit addr: 0x00000000f4300000/0x00002000 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 8086 Product ID: 1011 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00 0x00c8: Capability 0x01: Power Management 0x00d0: Capability 0x05: Message Signaled Interrupts (MSI) 0x00e0: Capability 0x10: PCI Express Link Speed: 2.5 / 2.5 GT/s Link Width: x1 / x1 21:0:0: Ricoh 5C476 CardBus 0x0000: Vendor ID: 1180 Product ID: 0476 0x0004: Command: 0107 Status: 0210 0x0008: Class: 06 Subclass: 07 Interface: 00 Revision: ba 0x000c: BIST: 00 Header Type: 82 Latency Timer: 20 Cache Line Size: 10 0x0010: Cardbus Control Registers Base Address: f4800000 0x0018: Primary Bus: 21 Cardbus Bus: 22 Subordinate Bus: 24 Cardbus Latency Timer: b0 0x001c: Memory Base 0: fffff000 0x0020: Memory Limit 0: 00000000 0x0024: Memory Base 1: fffff000 0x0028: Memory Limit 1: 00000000 0x002c: I/O Base 0: fffffffc 0x0030: I/O Limit 0: 00000000 0x0034: I/O Base 1: fffffffc 0x0038: I/O Limit 1: 00000000 0x003c: Interrupt Pin: 01 Line: 0b Bridge Control: 07c0 0x0040: Subsystem Vendor ID: 17aa Product ID: 20c6 0x0044: 16-bit Legacy Mode Base Address: 00000001 0x00dc: Capability 0x01: Power Management dmesg: OpenBSD 5.5-beta (GENERIC.MP) #287: Fri Feb 7 11:45:09 MST 2014 [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 4166717440 (3973MB) avail mem = 4047581184 (3860MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (80 entries) bios0: vendor LENOVO version "7UET94WW (3.24 )" date 10/17/2012 bios0: LENOVO 6475BE3 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA DMAR SSDT SSDT SSDT acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3) EHC1(S3) HDEF(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiec0 at acpi0 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 2261.33 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF cpu0: 3MB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges cpu0: apic clock running at 266MHz cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 2261.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF cpu1: 3MB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 2, remapped to apid 1 acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (AGP_) acpiprt2 at acpi0: bus 2 (EXP0) acpiprt3 at acpi0: bus 3 (EXP1) acpiprt4 at acpi0: bus -1 (EXP2) acpiprt5 at acpi0: bus 5 (EXP3) acpiprt6 at acpi0: bus 13 (EXP4) acpiprt7 at acpi0: bus 21 (PCI1) acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpipwrres0 at acpi0: PUBS, resource for USB0, USB3, USB5, EHC0, EHC1 acpitz0 at acpi0: critical temperature is 127 degC acpitz1 at acpi0: critical temperature is 100 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB acpibat0 at acpi0: BAT0 model "42T5264" serial 3499 type LION oem "Panasonic" acpibat1 at acpi0: BAT1 not present acpiac0 at acpi0: AC unit online acpithinkpad0 at acpi0 acpidock0 at acpi0: GDCK docked (15) cpu0: Enhanced SpeedStep 2261 MHz: speeds: 2267, 2266, 1600, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 intagp0 at vga1 agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 inteldrm0 at vga1 drm0 at inteldrm0 inteldrm0: 1280x900 wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address 00:1c:25:95:39:e7 uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi azalia0: codecs: Conexant CX20561 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi pci1 at ppb0 bus 2 ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi pci2 at ppb1 bus 3 iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: msi, MIMO 3T3R, MoW, address 00:16:ea:b3:62:e8 ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi pci3 at ppb2 bus 5 ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi pci4 at ppb3 bus 13 uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16 uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17 uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 pci5 at ppb4 bus 21 cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 22 device 0 cacheline 0x10, lattimer 0xb0 pcmcia0 at cardslot0 pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03 ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, HGST HTS725050A7, GH2O> SCSI3 0/direct fixed naa.5000cca76cc03cc3 sd0: 476940MB, 512 bytes/sector, 976773168 sectors cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GSA-U20N, HX10> ATAPI 5/cdrom removable ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int 23 iic0 at ichiic0 usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 aps0 at isa0 port 0x1600/31 umass0 at uhub0 port 1 configuration 1 interface 0 "JetFlash Mass Storage Device" rev 2.00/11.00 addr 2 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: <JetFlash, Transcend 8GB, 1100> SCSI2 0/direct removable serial.856410004SXZH4F3E24H sd1: 7728MB, 512 bytes/sector, 15826944 sectors uhub8 at uhub0 port 5 "IBM product 0x4485" rev 2.00/0.01 addr 3 uhidev0 at uhub8 port 1 configuration 1 interface 0 "Avago USB Optical Mouse" rev 2.00/2.00 addr 4 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse1 at ums0 mux 0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed sd2: 250876MB, 512 bytes/sector, 513794592 sectors softraid0: volume sd2 is roaming, it used to be sd4, updating metadata root on sd2a (d2946bed46ef4222.a) swap on sd2b dump on sd2b
