On Tue, Sep 01, 2015 at 09:54:57AM -0400, Andre Smagin wrote: > Hello. > > Today I tried updating my home firewall to -current and ran into a > kernel panic. Below are the console outputs from bsd.rd, bsd, and a > working bsd-current from March. > > The system is an older Portwell NAD-2074 appliance. > > Thank you in advance for your help! > -- > Andre
I believe this was the same problem previously reported, and if so, a fix went into snapshots about an hour ago. Wait for the new snap to appear and give it a try, thanks. -ml > > bsd.rd: > ~~~~~~~ > > >> OpenBSD/i386 BOOT 3.26........... > >> > boot> boot bsd.rd > > booting hd0a:bsd.rd: 3175988+1310272+2057216+0+425984 > [72+247664+237984]=0x71daf4 > entry point at 0x2000d4 > > > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2015 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 5.8-current (RAMDISK_CD) #1093: Tue Sep 1 01:16:57 MDT 2015 > [email protected]:/usr/src/sys/arch/i386/compile/RAMDISK_CD > cpu0: VIA C7 Processor 1000MHz ("CentaurHauls" 686-class) 1 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE,NXE,SSE3,EST,TM2,xTPR > real mem = 1274605568 (1215MB) > avail mem = 1241051136 (1183MB) > mainbus0 at root > bios0 at mainbus0: date 10/09/07, BIOS32 rev. 0 @ 0xf9f70, SMBIOS rev. 2.3 @ > 0xf0800 (33 entries) > bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 10/09/2007 > > acpi at bios0 function 0x0 not configured > apm0 at bios0uvm_fault(0xd08617d4, 0xd0a66000, 0, 4) -> d > fatal page fault (6) in supervisor mode > trap type 6 code 11 eip 80fc cs 38 eflags 10002 cr2 d0a660fc cpl 0 > panic: trap type 6, code=11, pc=80fc > > The operating system has halted. > Please press any key to reboot. > > bsd: > ~~~~ > > >> OpenBSD/i386 BOOT 3.26........... > >> > boot> boot bsd.new > > booting hd0a:bsd.new: 7518564+2014480+189444+0+1069056 > [72+410960+404883]=0xb134c8 > entry point at 0x2000d4 > > > [ using 816328 bytes of bsd ELF symbol table ] > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2015 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 5.8-current (GENERIC) #1124: Tue Sep 1 01:06:27 MDT 2015 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: VIA C7 Processor 1000MHz ("CentaurHauls" 686-class) 1 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE,NXE,SSE3,EST,TM2,xTPR > real mem = 1274560512 (1215MB) > avail mem = 1237835776 (1180MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: date 10/09/07, BIOS32 rev. 0 @ 0xf9f70, SMBIOS rev. 2.3 @ > 0xf0800 (33 entries) > bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 10/09/2007 > > acpi at bios0 function 0x0 not configured > apm0 at bios0uvm_fault(0xd0b6a5e0, 0xd0d7a000, 0, 4) -> d > kernel: page fault trap, code=0 > Stopped at __ALIGN_SIZE+0x70fc:uvm_fault(0xd0b8c000, 0x8000, 0, 1) -> e > kernel: page fault trap, code=0 > Stopped at db_read_bytes+0x17: movzbl 0(%esi,%ecx,1),%eax > > ddb> trace > db_read_bytes(80fc,1,d0d159e0,80fc,d0d159f0) at db_read_bytes+0x17 > db_get_value(80fc,1,0,0,d09d2c9a) at db_get_value+0x38 > db_disasm(80fc,0,d03cada0,d03cadc5,d09a77b8,d0d15ab0,0,0,d0d15ab0) at > db_disasm > +0x31 > > db_print_loc_and_inst(80fc,d0d15ac8,d0d15ad4,d03cadc5,d09d2c8b) at > db_print_loc > _and_inst+0x3e > > db_trap(6,0,58,0,d0d15b10) at db_trap+0x8d > kdb_trap(6,0,d0d15b80,4,d) at kdb_trap+0xcc > trap() at trap+0x2a5 > --- trap (number 21262) --- > 0x11: > > ddb> ps > PID PPID PGRP UID S FLAGS WAIT COMMAND > * 0 -1 0 0 7 0x10200 swapper > > ddb> show uvm > Current UVM status: > pagesize=4096 (0x1000), pagemask=0xfff, pageshift=12 > 302407 VM pages: 0 active, 0 inactive, 0 wired, 301540 free (0 zero) > min 10% (25) anon, 10% (25) vnode, 5% (12) vtext > pages 0 anon, 0 vnode, 0 vtext > freemin=0, free-target=0, inactive-target=0, wired-max=0 > faults=2, traps=2, intrs=0, ctxswitch=0 fpuswitch=0 > softint=0, syscalls=0, kmapent=20 > fault counts: > noram=0, noanon=0, pgwait=0, pgrele=0 > ok relocks(total)=0(0), anget(retries)=0(0), amapcopy=0 > neighbor anon/obj pg=0/0, gets(lock/unlock)=0/0 > cases: anon=0, anoncow=0, obj=0, prcopy=0, przero=0 > daemon and swap counts: > woke=0, revs=0, scans=0, obscans=0, anscans=0 > busy=0, freed=0, reactivate=0, deactivate=0 > pageouts=0, pending=0, nswget=0 > nswapdev=0, nanon=0, nanonneeded=0 nfreeanon=0 > swpages=0, swpginuse=0, swpgonly=0 paging=0 > kernel pointers: > objs(kern)=0xd0b6a540 > > ddb> show bcstats > Current Buffer Cache status: > numbufs 0 busymapped 0, delwri 0 > kvaslots 1216 avail kva slots 1216 > bufpages 0, dirtypages 0 > pendingreads 0, pendingwrites 0 > > Last known working kernel: > ~~~~~~~~~~~~~~~~~~~~~~~~~~ > > Phoenix Technologies, LTD > System Configurations > +==============================================================================+ > | CPU Type : VIA C7 Base Memory : 640K > | > | CPU ID/ucode ID : 06D0 Extended Memory :1244160K > | > | CPU Clock : 1.00GHz Cache Memory : 128K > | > |------------------------------------------------------------------------------| > | Diskette Drive A : None Display Type : EGA/VGA > | > | Diskette Drive B : None Serial Port(s) : 3F8 2F8 > | > | Pri. Master Disk : None Parallel Port(s) : None > | > | Pri. Slave Disk : None DDR2 SDRAM at Rank : 0 1 2 > | > | Sec. Master Disk : CHS,DMA 2, 4225MB > | > | Sec. Slave Disk : None > | > +==============================================================================+ > PCI device listing ... > Bus No. Device No. Func No. Vendor/Device Class Device Class IRQ > -------------------------------------------------------------------------------- > 0 8 0 10EC 8139 0200 Network Cntrlr 5 > 0 9 0 10EC 8139 0200 Network Cntrlr 11 > 0 10 0 10EC 8139 0200 Network Cntrlr 9 > 0 11 0 10EC 8139 0200 Network Cntrlr 7 > 0 15 0 1106 3149 0101 IDE Cntrlr 11 > >> OpenBSD/i386 BOOT 3.26........... > >> > boot> > > booting hd0a:/bsd: 9777628+1068236 [72+409680+404343]=0xb1ec54 > entry point at 0x200120 > > [ using 814508 bytes of bsd ELF symbol table ] > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2015 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 5.7 (GENERIC) #0: Thu Mar 5 11:56:41 EST 2015 > andre@---:/build/src/sys/arch/i386/compile/GENERIC > cpu0: VIA C7 Processor 1000MHz ("CentaurHauls" 686-class) 1 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE,NXE,SSE3,EST,TM2,xTPR > real mem = 1274560512 (1215MB) > avail mem = 1241370624 (1183MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: date 10/09/07, BIOS32 rev. 0 @ 0xf9f70, SMBIOS rev. 2.3 @ > 0xf0800 (33 entries) > bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 10/09/2007 > > acpi at bios0 function 0x0 not configured > apm0 at bios0: Power Management spec V1.2 (slowidle) > mpbios0 at bios0: Intel MP Specification 1.4 > cpu0 at mainbus0: apid 0 (boot processor) > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: RNG AES AES-CTR SHA1 SHA256 RSA > cpu0: apic clock running at 99MHz > mpbios0: bus 0 is type PCI > mpbios0: bus 1 is type PCI > mpbios0: bus 2 is type ISA > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 3, 24 pins > pcibios0 at bios0: rev 2.1 @ 0xf0000/0xd464 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd390/208 (11 entries) > pcibios0: PCI Exclusive IRQs: 5 7 9 10 11 > pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00) > pcibios0: PCI bus #1 is the last bus > bios0: ROM list: 0xc0000/0x8000 0xc8000/0xc000! > cpu0: unknown Enhanced SpeedStep CPU, msr 0x08100a1308000a13 > cpu0: using only highest and lowest power states > cpu0: Enhanced SpeedStep 998 MHz: speeds: 1333, 1067 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00 > viaagp0 at pchb0: v3 > agp0 at viaagp0: aperture at 0xe8000000, size 0x10000000 > pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00 > pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00 > pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00 > pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00 > pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00 > ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00 > pci_intr_map: bus 0 dev 1 func 0 pin 1; line 9 > pci_intr_map: no MP mapping found > pci_intr_map: bus 0 dev 1 func 0 pin 2; line 11 > pci_intr_map: no MP mapping found > pci_intr_map: bus 0 dev 1 func 0 pin 3; line 7 > pci_intr_map: no MP mapping found > pci_intr_map: bus 0 dev 1 func 0 pin 4; line 11 > pci_intr_map: no MP mapping found > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > rl0 at pci0 dev 8 function 0 "Realtek 8139" rev 0x10: apic 2 int 16, address > 00:90:fb:1b:37:f3 > rlphy0 at rl0 phy 0: RTL internal PHY > > rl1 at pci0 dev 9 function 0 "Realtek 8139" rev 0x10: apic 2 int 17, address > 00:90:fb:1b:37:f2 > rlphy1 at rl1 phy 0: RTL internal PHY > > rl2 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: apic 2 int 18, address > 00:90:fb:1b:37:f1 > rlphy2 at rl2 phy 0: RTL internal PHY > > rl3 at pci0 dev 11 function 0 "Realtek 8139" rev 0x10: apic 2 int 19, address > 00:90:fb:1b:37:f0 > rlphy3 at rl3 phy 0: RTL internal PHY > > pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA > pciide0: using apic 2 int 20 for native-PCI interrupt > pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, > channel 0 configured to compatibility, channel 1 configured to compatibility > pciide1: channel 0 disabled (no drives) > wd0 at pciide1 channel 1 drive 0: <SILICONSYSTEMS INC 4GB> > wd0: 1-sector PIO, LBA, 4029MB, 8251488 sectors > wd0(pciide1:1:0): using PIO mode 4, DMA mode 2 > uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 > uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 > uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 > uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 > ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: apic 2 int 21 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1 > viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00: SMI > iic0 at viapm0 > spdmem0 at iic0 addr 0x50: 256MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM > spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM > ath0 at pci0 dev 20 function 0 "Atheros AR5212" rev 0x01: apic 2 int 22 > ath0: AR2414 7.9 phy 4.5 rf2413 5.6 eeprom 5.2, FCC1A, address > 00:13:46:6e:e8:ea > usb1 at uhci0: USB revision 1.0 > > uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at mainbus0 > isadma0 at isa0 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > viasio0 at isa0 port 0x2e/2M, WDG > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on wd0a (1b572d8e5c8a10f3.a) swap on wd0b dump on wd0b >
