On Tue, 29 Sep 2015 07:43:34 -0700
Mike Larkin <[email protected]> wrote:
> I believe this was the same problem previously reported, and if so,
> a fix went into snapshots about an hour ago. Wait for the new snap
> to appear and give it a try, thanks.
>
> -ml
Thank you for looking into the issue, much appreciated!
The good news is that bsd #1185 now boots without any noticeable
issues (dmesg at the end).
The less fortunate news is that bsd.rd fails to boot, but in a
different way than before:
boot> boot bsd.rd
booting hd0a:bsd.rd: 3193920+1311488+2057216+0+425984
[72+248384+238601]=0x723030
entry point at 0x2000d4
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2015 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.8-current (RAMDISK_CD) #1151: Tue Sep 29 12:06:03 MDT 2015
[email protected]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: VIA C7 Processor 1000MHz ("CentaurHauls" 686-class) 1 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE,NXE,SSE3,EST,TM2,xTPR
real mem = 1274605568 (1215MB)
avail mem = 1242415104 (1184MB)
<click><half a second pause><click>
<system restarts>
The clicking sounds are normal / the same as when I reboot the
system manually, as in:
sudo reboot
...
syncing disks... done
rebooting...
<click><half a second pause><click>
<system restarts>
I will be happy to do any other testing if it could be helpful.
--
Andre
dmesg from the latest snapshot bsd:
boot> boot bsd.new
booting hd0a:bsd.new: 7692932+2030544+189444+0+1069056
[72+414160+409134]=0xb441e4
entry point at 0x2000d4
[ using 823780 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2015 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.8-current (GENERIC) #1185: Tue Sep 29 11:55:28 MDT 2015
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA C7 Processor 1000MHz ("CentaurHauls" 686-class) 1 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE,NXE,SSE3,EST,TM2,xTPR
real mem = 1274560512 (1215MB)
avail mem = 1237639168 (1180MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 10/09/07, BIOS32 rev. 0 @ 0xf9f70, SMBIOS rev. 2.3 @
0xf0800 (33 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 10/09/2007
acpi at bios0 function 0x0 not configured
apm0 at bios0: Power Management spec V1.2 (slowidle)
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
cpu0: apic clock running at 99MHz
mpbios0: bus 0 is type PCI
mpbios0: bus 1 is type PCI
mpbios0: bus 2 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 3, 24 pins
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xd464
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd390/208 (11 entries)
pcibios0: PCI Exclusive IRQs: 5 7 9 10 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0xc000!
cpu0: unknown Enhanced SpeedStep CPU, msr 0x08100a1308000a13
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 998 MHz: speeds: 1333, 1067 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00
viaagp0 at pchb0: v3
agp0 at viaagp0: aperture at 0xe8000000, size 0x10000000
pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci_intr_map: bus 0 dev 1 func 0 pin 1; line 9
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 1 func 0 pin 2; line 11
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 1 func 0 pin 3; line 7
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 1 func 0 pin 4; line 11
pci_intr_map: no MP mapping found
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
rl0 at pci0 dev 8 function 0 "Realtek 8139" rev 0x10: apic 2 int 16, address
00:90:fb:1b:37:f3
rlphy0 at rl0 phy 0: RTL internal PHY
rl1 at pci0 dev 9 function 0 "Realtek 8139" rev 0x10: apic 2 int 17, address
00:90:fb:1b:37:f2
rlphy1 at rl1 phy 0: RTL internal PHY
rl2 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: apic 2 int 18, address
00:90:fb:1b:37:f1
rlphy2 at rl2 phy 0: RTL internal PHY
rl3 at pci0 dev 11 function 0 "Realtek 8139" rev 0x10: apic 2 int 19, address
00:90:fb:1b:37:f0
rlphy3 at rl3 phy 0: RTL internal PHY
pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide0: using apic 2 int 20 for native-PCI interrupt
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
pciide1: channel 0 disabled (no drives)
wd0 at pciide1 channel 1 drive 0: <SILICONSYSTEMS INC 4GB>
wd0: 1-sector PIO, LBA, 4029MB, 8251488 sectors
wd0(pciide1:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: apic 2 int 21
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: apic 2 int 21
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: apic 2 int 21
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: apic 2 int 21
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: apic 2 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00: SMI
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 256MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
ath0 at pci0 dev 20 function 0 "Atheros AR5212" rev 0x01: apic 2 int 22
ath0: AR2414 7.9 phy 4.5 rf2413 5.6 eeprom 5.2, FCC1A, address 00:13:46:6e:e8:ea
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
viasio0 at isa0 port 0x2e/2M, WDG
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (1b572d8e5c8a10f3.a) swap on wd0b dump on wd0b
