On Tue, Sep 29, 2015 at 09:47:07PM -0400, Andre Smagin wrote: > On Tue, 29 Sep 2015 07:43:34 -0700 > Mike Larkin <[email protected]> wrote: > > > I believe this was the same problem previously reported, and if so, > > a fix went into snapshots about an hour ago. Wait for the new snap > > to appear and give it a try, thanks. > > > > -ml > > Thank you for looking into the issue, much appreciated! > > The good news is that bsd #1185 now boots without any noticeable > issues (dmesg at the end). > > The less fortunate news is that bsd.rd fails to boot, but in a > different way than before:
Ok I see what's going on here. The alignment / padding layout of the different kernels is killing us. I'll need to sort out the right layout, shouldn't take too long. Stay tuned. -ml > > boot> boot bsd.rd > > booting hd0a:bsd.rd: 3193920+1311488+2057216+0+425984 > [72+248384+238601]=0x723030 > entry point at 0x2000d4 > > > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2015 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 5.8-current (RAMDISK_CD) #1151: Tue Sep 29 12:06:03 MDT 2015 > [email protected]:/usr/src/sys/arch/i386/compile/RAMDISK_CD > cpu0: VIA C7 Processor 1000MHz ("CentaurHauls" 686-class) 1 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE,NXE,SSE3,EST,TM2,xTPR > real mem = 1274605568 (1215MB) > avail mem = 1242415104 (1184MB) > <click><half a second pause><click> > <system restarts> > > The clicking sounds are normal / the same as when I reboot the > system manually, as in: > > sudo reboot > ... > syncing disks... done > rebooting... > <click><half a second pause><click> > <system restarts> > > I will be happy to do any other testing if it could be helpful. > -- > Andre > > > dmesg from the latest snapshot bsd: > > boot> boot bsd.new > > booting hd0a:bsd.new: 7692932+2030544+189444+0+1069056 > [72+414160+409134]=0xb441e4 > entry point at 0x2000d4 > > > [ using 823780 bytes of bsd ELF symbol table ] > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2015 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 5.8-current (GENERIC) #1185: Tue Sep 29 11:55:28 MDT 2015 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: VIA C7 Processor 1000MHz ("CentaurHauls" 686-class) 1 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE,NXE,SSE3,EST,TM2,xTPR > real mem = 1274560512 (1215MB) > avail mem = 1237639168 (1180MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: date 10/09/07, BIOS32 rev. 0 @ 0xf9f70, SMBIOS rev. 2.3 @ > 0xf0800 (33 entries) > bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 10/09/2007 > > acpi at bios0 function 0x0 not configured > apm0 at bios0: Power Management spec V1.2 (slowidle) > mpbios0 at bios0: Intel MP Specification 1.4 > cpu0 at mainbus0: apid 0 (boot processor) > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: RNG AES AES-CTR SHA1 SHA256 RSA > cpu0: apic clock running at 99MHz > mpbios0: bus 0 is type PCI > mpbios0: bus 1 is type PCI > mpbios0: bus 2 is type ISA > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 3, 24 pins > pcibios0 at bios0: rev 2.1 @ 0xf0000/0xd464 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd390/208 (11 entries) > pcibios0: PCI Exclusive IRQs: 5 7 9 10 11 > pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00) > pcibios0: PCI bus #1 is the last bus > bios0: ROM list: 0xc0000/0x8000 0xc8000/0xc000! > cpu0: unknown Enhanced SpeedStep CPU, msr 0x08100a1308000a13 > cpu0: using only highest and lowest power states > cpu0: Enhanced SpeedStep 998 MHz: speeds: 1333, 1067 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00 > viaagp0 at pchb0: v3 > agp0 at viaagp0: aperture at 0xe8000000, size 0x10000000 > pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00 > pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00 > pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00 > pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00 > pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00 > ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00 > pci_intr_map: bus 0 dev 1 func 0 pin 1; line 9 > pci_intr_map: no MP mapping found > pci_intr_map: bus 0 dev 1 func 0 pin 2; line 11 > pci_intr_map: no MP mapping found > pci_intr_map: bus 0 dev 1 func 0 pin 3; line 7 > pci_intr_map: no MP mapping found > pci_intr_map: bus 0 dev 1 func 0 pin 4; line 11 > pci_intr_map: no MP mapping found > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > rl0 at pci0 dev 8 function 0 "Realtek 8139" rev 0x10: apic 2 int 16, address > 00:90:fb:1b:37:f3 > rlphy0 at rl0 phy 0: RTL internal PHY > > rl1 at pci0 dev 9 function 0 "Realtek 8139" rev 0x10: apic 2 int 17, address > 00:90:fb:1b:37:f2 > rlphy1 at rl1 phy 0: RTL internal PHY > > rl2 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: apic 2 int 18, address > 00:90:fb:1b:37:f1 > rlphy2 at rl2 phy 0: RTL internal PHY > > rl3 at pci0 dev 11 function 0 "Realtek 8139" rev 0x10: apic 2 int 19, address > 00:90:fb:1b:37:f0 > rlphy3 at rl3 phy 0: RTL internal PHY > > pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA > pciide0: using apic 2 int 20 for native-PCI interrupt > pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, > channel 0 configured to compatibility, channel 1 configured to compatibility > pciide1: channel 0 disabled (no drives) > wd0 at pciide1 channel 1 drive 0: <SILICONSYSTEMS INC 4GB> > wd0: 1-sector PIO, LBA, 4029MB, 8251488 sectors > wd0(pciide1:1:0): using PIO mode 4, DMA mode 2 > uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 > uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 > uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 > uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 > ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: apic 2 int 21 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1 > viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00: SMI > iic0 at viapm0 > spdmem0 at iic0 addr 0x50: 256MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM > spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM > ath0 at pci0 dev 20 function 0 "Atheros AR5212" rev 0x01: apic 2 int 22 > ath0: AR2414 7.9 phy 4.5 rf2413 5.6 eeprom 5.2, FCC1A, address > 00:13:46:6e:e8:ea > usb1 at uhci0: USB revision 1.0 > > uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at mainbus0 > isadma0 at isa0 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > viasio0 at isa0 port 0x2e/2M, WDG > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on wd0a (1b572d8e5c8a10f3.a) swap on wd0b dump on wd0b >
