On my Thinkpad x200, unplugging the power reset the brightness to the value
defined in /etc/wsconsctl.conf. This doesn't happen on my X220 though.
dmesg (x200):
OpenBSD 5.8-current (GENERIC.MP) #1757: Sat Dec 19 08:17:18 MST 2015
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 5242556416 (4999MB)
avail mem = 5079539712 (4844MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (68 entries)
bios0: vendor LENOVO version "6DET72WW (3.22 )" date 10/25/2012
bios0: LENOVO 745432U
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT SSDT
TCPA SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP0(S4) EXP1(S4) EXP2(S4)
EXP3(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3) EHC1(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz, 2527.33 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
cpu0: 3MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
cpu0: apic clock running at 265MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz, 2527.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
cpu1: 3MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus -1 (EXP2)
acpiprt5 at acpi0: bus 5 (EXP3)
acpicpu0 at acpi0: !C3(250@17 mwait.3@0x20), !C2(500@1 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: !C3(250@17 mwait.3@0x20), !C2(500@1 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for USB0, USB3, USB5, EHC0, EHC1
acpitz0 at acpi0: critical temperature is 127 degC
acpitz1 at acpi0: critical temperature is 104 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4534" serial 824 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit offline
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK not docked (0)
cpu0: Enhanced SpeedStep 2527 MHz: speeds: 2534, 2533, 1600, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: msi
inteldrm0: 1280x800
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
"Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
puc0 at pci0 dev 3 function 3 "Intel GM45 KT" rev 0x07: ports: 1 com
com4 at puc0 port 0 apic 1 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 15 bytes
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address
00:1f:16:0f:6e:5e
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: Conexant CX20561
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO
1T2R, MoW, address 00:21:5d:8b:7d:80
ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi
pci3 at ppb2 bus 5
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci4 at ppb3 bus 13
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x03: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 1 int 16 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <HITACHI HTS723216A7A364>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int
23
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
umass0 at uhub1 port 1 configuration 1 interface 0 "Kingston DataTraveler
2.0" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00> SCSI2
0/direct removable serial.09511665FD51FB423D6B
sd0: 7388MB, 512 bytes/sector, 15131636 sectors
uhidev0 at uhub5 port 2 configuration 1 interface 0 "Holtek Mouse" rev
1.10/2.90 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (ff434aa861ee35b0.a) swap on sd0b dump on sd0b
iwn0: received probe_resp from c6:05:28:77:ea:c2 rssi -27 mode 11g
iwn0: received probe_resp from c6:05:28:77:ea:c2 rssi -27 mode 11g
iwn0: received beacon from c6:05:28:77:ea:c2 rssi -33 mode 11g
iwn0: received probe_resp from c6:05:28:77:ea:c2 rssi -31 mode 11g
iwn0: received probe_resp from e8:de:27:79:56:4c rssi -59 mode 11g
iwn0: received probe_resp from e8:de:27:79:56:4c rssi -56 mode 11g
iwn0: begin active scan
iwn0: received probe_resp from c6:05:28:77:ea:c2 rssi -27 mode 11g
iwn0: received probe_resp from c6:05:28:77:ea:c2 rssi -28 mode 11g
iwn0: received probe_resp from c6:05:28:77:ea:c2 rssi -31 mode 11g
iwn0: received probe_resp from c6:05:28:77:ea:c2 rssi -31 mode 11g
iwn0: received probe_resp from c6:05:28:77:ea:c2 rssi -32 mode 11g
iwn0: received beacon from c6:05:28:77:ea:c2 rssi -39 mode 11g
iwn0: received probe_resp from e8:de:27:79:56:4c rssi -59 mode 11g
iwn0: received beacon from e8:de:27:79:56:4c rssi -59 mode 11g
iwn0: received probe_resp from e8:de:27:79:56:4c rssi -56 mode 11g
iwn0: received probe_resp from e8:de:27:79:56:4c rssi -59 mode 11g
iwn0: received probe_resp from c6:05:28:77:ea:c2 rssi -70 mode 11g
iwn0: received beacon from c6:05:28:77:ea:c2 rssi -80 mode 11g
iwn0: end active scan
iwn0: sending auth to c6:05:28:77:ea:c2 on channel 1 mode 11g
iwn0: sending assoc_req to c6:05:28:77:ea:c2 on channel 1 mode 11g
iwn0: received auth from c6:05:28:77:ea:c2 rssi -30 mode 11g
iwn0: associated with c6:05:28:77:ea:c2 ssid "LTE-E5372" channel 1 start
MCS 0 long preamble short slot time HT enabled
iwn0: received assoc_resp from c6:05:28:77:ea:c2 rssi -30 mode 11g
iwn0: sending action to c6:05:28:77:ea:c2 on channel 1 mode 11n
iwn0: received action from c6:05:28:77:ea:c2 rssi -33 mode 11n
iwn0: received msg 1/4 of the 4-way handshake from c6:05:28:77:ea:c2
iwn0: sending msg 2/4 of the 4-way handshake to c6:05:28:77:ea:c2
iwn0: received msg 3/4 of the 4-way handshake from c6:05:28:77:ea:c2
iwn0: sending msg 4/4 of the 4-way handshake to c6:05:28:77:ea:c2
iwn0: sending action to c6:05:28:77:ea:c2 on channel 1 mode 11n
iwn0: received action from c6:05:28:77:ea:c2 rssi -26 mode 11n
On Mon, Dec 21, 2015 at 5:09 PM, Marcus MERIGHI <[email protected]>
wrote:
> [email protected] (Glenn Faustino), 2015.12.20 (Sun) 11:19 (CET):
> > Thanks! This also fixed the brightness issue on my Thinkpad X220 and
> > X200.
>
> hw.version=ThinkPad X200s
>
> Brightness now stays at the level I've set with Fn+PgUp/PgDown when
> un/plugging power; it does, however, not stay on the level I've set with
> ``wsconsctl display.brightness=XYZ''.
>
> Is this what you see?
>
> Bye, Marcus
>
> OpenBSD 5.9-beta (GENERIC.MP) #0: Mon Dec 21 09:51:43 CET 2015
> fifi@fofo:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 4166717440 (3973MB)
> avail mem = 4036313088 (3849MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (68 entries)
> bios0: vendor LENOVO version "6DET72WW (3.22 )" date 10/25/2012
> bios0: LENOVO 7470W1W
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA
> DMAR SSDT SSDT SSDT
> acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP0(S4) EXP1(S4)
> EXP2(S4) EXP3(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3) EHC1(S3) HDEF(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpiec0 at acpi0
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz, 1862.26 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
> cpu0: 6MB 64b/line 16-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
> cpu0: apic clock running at 266MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz, 1862.00 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
> cpu1: 6MB 64b/line 16-way L2 cache
> cpu1: smt 0, core 1, package 0
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 2, remapped to apid 1
> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (AGP_)
> acpiprt2 at acpi0: bus 2 (EXP0)
> acpiprt3 at acpi0: bus 3 (EXP1)
> acpiprt4 at acpi0: bus -1 (EXP2)
> acpiprt5 at acpi0: bus 5 (EXP3)
> acpicpu0 at acpi0: !C3(100@57 mwait.3@0x30), !C2(500@1 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: !C3(100@57 mwait.3@0x30), !C2(500@1 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: PUBS, resource for USB0, USB3, USB5, EHC0, EHC1
> acpitz0 at acpi0: critical temperature is 127 degC
> acpitz1 at acpi0: critical temperature is 104 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpibat0 at acpi0: BAT0 model "93P5030" serial 165 type LION oem "SANYO"
> acpibat1 at acpi0: BAT1 not present
> acpiac0 at acpi0: AC unit online
> acpithinkpad0 at acpi0
> acpidock0 at acpi0: GDCK not docked (0)
> cpu0: Enhanced SpeedStep 1862 MHz: speeds: 1867, 1866, 1600, 800 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> inteldrm0 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
> drm0 at inteldrm0
> intagp0 at inteldrm0
> agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> inteldrm0: msi
> inteldrm0: 1280x800
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
> "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
> em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi,
> address 00:1f:16:32:df:5c
> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21
> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22
> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
> azalia0: codecs: Conexant CX20561
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
> pci1 at ppb0 bus 2
> ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
> pci2 at ppb1 bus 3
> iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: msi, MIMO
> 3T3R, MoW, address 00:21:6a:8c:3d:9c
> ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi
> pci3 at ppb2 bus 5
> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> pci4 at ppb3 bus 13
> pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
> ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
> ahci0: port 0: 3.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, SanDisk SDSSDHII, X312> SCSI3 0/direct
> fixed naa.5001b44e1d7ef244
> sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin
> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1
> int 23
> iic0 at ichiic0
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb7 at uhci5: USB revision 1.0
> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> uvideo0 at uhub0 port 6 configuration 1 interface 0 "Lenovo product
> 0x480c" rev 2.00/31.34 addr 2
> video0 at uvideo0
> umass0 at uhub1 port 6 configuration 1 interface 0 "RICOH USB2.0-FLASH
> Media" rev 2.00/0.01 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0
> probe(umass0:1:0): Check Condition (error 0x70) on opcode 0x0
> SENSE KEY: Aborted Command
> ASC/ASCQ: I/O Process Terminated
> sd1 at scsibus2 targ 1 lun 0: <RICOH, R5U880FlashMedia, 0000> SCSI2
> 0/direct removable serial.05ca1880R5U880-00003
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> root on sd0a (ba2fda317d02edc5.a) swap on sd0b dump on sd0b
>
>
