With the new 1/5 snapshot, the install completes successfully. Many thanks to krw@ and rpe@.
The pdisk stderr stuff that I spoke with Robert about is still spit out, but fdisk follows that without issue. Brian Conway On Tue, Dec 29, 2015 at 3:18 PM, Brian Conway <[email protected]> wrote: > I'm attempting a fresh install with the 12/28 snapshot. The drive in > question had the first 100 MB zeroed out by dd prior to install. It > appears to attempt a whole-disk install, fail in a couple ways (read > error, pdisk, newfs), and then continue on with looping OpenBSD-area > attempts until I kill it. > > The hardware in question is newly-acquired, so I can't rule out a > drive issue, but it autoinstalls without problem on 5.8-release. > Thanks for your time. > > install.conf, ai.log, dmesg follow: > > ----- install.conf ----- > System hostname = build > Password for root account = $2b$09$... > Do you expect to run the X Window System = no > Setup a user = bconway > Full name for user = Brian Conway > Password for user = $2b$10$... > What timezone are you in = UTC > Use (W)hole disk = W > Location of sets = http > HTTP Server = mirror.esc7.net > Set name(s) = -game* -x* > > ----- ai.log ----- > System hostname? (short form, e.g. 'foo') build > > Available network interfaces are: gem0 vlan0. > Which network interface do you wish to configure? (or 'done') [gem0] gem0 > IPv4 address for gem0? (or 'dhcp' or 'none') [dhcp] dhcp > DHCPREQUEST on gem0 to 255.255.255.255 > DHCPACK from 10.10.10.1 (02:00:00:00:00:00) > bound to 10.10.10.100 -- renewal in 21600 seconds. > IPv6 address for gem0? (or 'rtsol' or 'none') [none] none > Available network interfaces are: gem0 vlan0. > Which network interface do you wish to configure? (or 'done') [done] done > Using DNS domainname int.rcesoftware.com > Using DNS nameservers at 10.10.10.1 > > Password for root account? <provided> > Public ssh key for root account? [none] none > Start sshd(8) by default? [yes] yes > Do you want the X Window System to be started by xdm(1)? [no] no > Change the default console to zstty0? [no] no > Setup a user? (enter a lower-case loginname, or 'no') [no] bconway > Full name for user bconway? [bconway] Brian Conway > Password for user bconway? <provided> > Public ssh key for user bconway [none] none > WARNING: root is targeted by password guessing attacks, pubkeys are safer. > Allow root ssh login? (yes, no, prohibit-password) [no] no > What timezone are you in? ('?' for list) [UTC] UTC > > Available disks are: wd0. > Which disk is the root disk? ('?' for details) [wd0] wd0 > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > pdisk: No valid block 1 on '/dev/wd0c' > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > pdisk: No valid block 1 on '/dev/wd0c' > MBR has invalid signature; not showing it. > Use (W)hole disk or (E)dit the MBR? [whole] W > Creating a 1MB DOS partition and an OpenBSD partition for rest of > wd0...1+0 records in > 1+0 records out > 1048576 bytes transferred in 0.091 secs (11448336 bytes/sec) > done. > newfs_msdos: /dev/rwd0i: Device not configured > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > pdisk: No valid block 1 on '/dev/wd0c' > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > pdisk: No valid block 1 on '/dev/wd0c' > Disk: wd0 geometry: 155061/16/63 [156301488 Sectors] > Offset: 0 Signature: 0xAA55 > Starting Ending LBA Info: > #: id C H S - C H S [ start: size ] > ------------------------------------------------------------------------------- > 0: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > 1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > 2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > 3: A6 1 0 17 - 155060 15 63 [ 1024: 156300464 ] OpenBSD > Use (W)hole disk, use the (O)penBSD area or (E)dit the MBR? [OpenBSD] OpenBSD > newfs_msdos: /dev/rwd0i: Device not configured > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > read failed > > ----- dmesg ----- > console out [ATY,RockHopper2_A] console in [keyboard], using USB > using parent ATY,RockHopper2Paren:: memaddr 98000000, size 8000000 : > consaddr 9c008000 : ioaddr 90020000, size 20000: width 1024 linebytes > 1024 height 768 depth 8 > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2015 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 5.9-beta (RAMDISK) #843: Sun Dec 27 20:02:14 MST 2015 > [email protected]:/usr/src/sys/arch/macppc/compile/RAMDISK > real mem = 1073741824 (1024MB) > avail mem = 1028304896 (980MB) > mainbus0 at root: model PowerMac10,2 > cpu0 at mainbus0: 7447A (Revision 0x105): 1499 MHz: 512KB L2 cache > mem at mainbus0 not configured > memc0 at mainbus0: uni-n rev 0xd2 > "hw-clock" at memc0 not configured > kiic0 at memc0 offset 0xf8001000 > iic0 at kiic0 > mpcpcibr0 at mainbus0 pci: uni-north > pci0 at mpcpcibr0 bus 0 > pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00 > vgafb0 at pci0 dev 16 function 0 "ATI Radeon 9200" rev 0x01, mmio > wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation) > mpcpcibr1 at mainbus0 pci: uni-north > pci1 at mpcpcibr1 bus 0 > macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00 > openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE > macgpio0 at macobio0 offset 0x50 > "modem-reset" at macgpio0 offset 0x1d not configured > "modem-power" at macgpio0 offset 0x1c not configured > macgpio1 at macgpio0 offset 0x9: irq 47 > "programmer-switch" at macgpio0 offset 0x11 not configured > "gpio5" at macgpio0 offset 0x6f not configured > "gpio6" at macgpio0 offset 0x70 not configured > "extint-gpio15" at macgpio0 offset 0x67 not configured > "escc-legacy" at macobio0 offset 0x12000 not configured > zs0 at macobio0 offset 0x13000: irq 22,23 > zstty0 at zs0 channel 0 > zstty1 at zs0 channel 1 > "i2s" at macobio0 offset 0x10000 not configured > "timer" at macobio0 offset 0x15000 not configured > adb0 at macobio0 offset 0x16000 > "i2c" at macobio0 offset 0x18000 not configured > wdc0 at macobio0 offset 0x20000 irq 24: DMA > "Broadcom BCM4318" rev 0x02 at pci1 dev 18 function 0 not configured > ohci0 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29, > version 1.0, legacy support > ohci1 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0 > ohci2 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0 > ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1 > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1 > usb2 at ohci1: USB revision 1.0 > uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1 > usb3 at ohci2: USB revision 1.0 > uhub3 at usb3 "NEC OHCI root hub" rev 1.00/1.00 addr 1 > mpcpcibr2 at mainbus0 pci: uni-north > pci2 at mpcpcibr2 bus 0 > kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00 > wdc1 at kauaiata0 irq 39: DMA > wd0 at wdc1 channel 0 drive 0: <ST9808211A> > wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors > atapiscsi0 at wdc1 channel 0 drive 1 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-RW CW-8124, DACD> ATAPI > 5/cdrom removable > wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 > cd0(wdc1:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 > "Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured > gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, > address 00:11:24:d1:c1:6a > bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4 > uhidev0 at uhub1 port 1 configuration 1 interface 0 "vendor 0x05ac > product 0x1000" rev 2.00/19.65 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0 > wskbd0 at ukbd0 mux 1 > wskbd0: connecting to wsdisplay0 > uhidev1 at uhub1 port 1 configuration 1 interface 1 "vendor 0x05ac > product 0x1000" rev 2.00/19.65 addr 2 > uhidev1: iclass 3/1 > uhid0 at uhidev1: input=3, output=0, feature=1 > uhidev2 at uhub2 port 1 configuration 1 interface 0 "Microsoft Comfort > Curve Keyboard 3000" rev 2.00/1.70 addr 2 > uhidev2: iclass 3/1 > ukbd1 at uhidev2 > wskbd1 at ukbd1: console keyboard, using wsdisplay0 > uhidev3 at uhub2 port 1 configuration 1 interface 1 "Microsoft Comfort > Curve Keyboard 3000" rev 2.00/1.70 addr 2 > uhidev3: iclass 3/0, 1 report id > uhid1 at uhidev3 reportid 1: input=7, output=0, feature=0 > softraid0 at root > scsibus1 at softraid0: 256 targets > bootpath: /pci@f4000000/ata-6@d/disk@0:/59.rd > root on rd0a swap on rd0b dump on rd0b
