On 10/20/17 1:07 PM, Stefan Sperling wrote:
> On Fri, Oct 20, 2017 at 11:08:07AM -0400, [email protected] wrote:
>>> Synopsis: bsd.rd hangs "iwm0: could not read firmware iwm-7265-16 (error
>>> 2)"
>>> Category: kernel
>>> Environment:
>> System : OpenBSD 6.2
>> Details : OpenBSD 6.2-current (RAMDISK_CD) #159: Fri Oct 20
>> 00:02:05 MDT 2017
>>
>> [email protected]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
>>
>> Architecture: OpenBSD.amd64
>> Machine : amd64
>>> Description:
>> I'm unable to finish booting bsd.rd. It hangs w/ the following text
>> on the screen (transcribed from camera image):
>> root on rd0a swap on rd0b dump on rd0b
>> iwm0: could not read firmware iwm-7265-16 (error 2)
>> iwm0: failed to load init firmware
>>
>> The hang has happened with the last few snaps. (Since I have not been
>> able to test since the appended Sep 9 dmesg, the problem arose between
>> Sep 9 and Oct 18).
>>
>>> How-To-Repeat:
>> boot /bsd.rd
>
> Works fine here with an iwm 7265.
>
> Are you sure iwm is implicated? What happens if you disable the iwm
> driver with config(8) or with 'boot -c'?
As of "OpenBSD 6.2-current (RAMDISK_CD) #161: Fri Oct 20 20:32:01 MDT 2017",
the message no longer appears and the install proceeds as expected. I've
appended the associated sendbug info in case its useful.
dmesg:
OpenBSD 6.2-current (GENERIC.MP) #163: Fri Oct 20 20:27:35 MDT 2017
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16974663680 (16188MB)
avail mem = 16453353472 (15691MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xaeee2000 (53 entries)
bios0: vendor Intel Corporation version "RYBDWi35.86A.0364.2017.0511.0949" date
05/11/2017
bios0: Intel Corporation NUC5i7RYB
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET SSDT UEFI LPIT SSDT ASF! SSDT
SSDT SSDT DMAR
acpi0: wakeup devices PEGP(S4) PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4)
PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4)
PXSX(S4) RP05(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-5557U CPU @ 3.10GHz, 3392.62 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
acpitimer0: recalibrated TSC frequency 3092842118 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-5557U CPU @ 3.10GHz, 3392.14 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i7-5557U CPU @ 3.10GHz, 3392.14 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-5557U CPU @ 3.10GHz, 3392.14 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimadt0: bogus nmi for apid 0
acpimadt0: bogus nmi for apid 2
acpimadt0: bogus nmi for apid 1
acpimadt0: bogus nmi for apid 3
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpihpet0: recalibrated TSC frequency 3092818821 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus 1 (RP01)
acpiprt5 at acpi0: bus -1 (RP02)
acpiprt6 at acpi0: bus -1 (RP03)
acpiprt7 at acpi0: bus 2 (RP04)
acpiprt8 at acpi0: bus -1 (RP05)
acpiprt9 at acpi0: bus -1 (RP06)
acpiprt10 at acpi0: bus -1 (RP07)
acpiprt11 at acpi0: bus -1 (RP08)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@117 mwait.1@0x30),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@117 mwait.1@0x30),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@117 mwait.1@0x30),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@117 mwait.1@0x30),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: FN00, resource for FAN0
acpipwrres12 at acpi0: FN01, resource for FAN1
acpipwrres13 at acpi0: FN02, resource for FAN2
acpipwrres14 at acpi0: FN03, resource for FAN3
acpipwrres15 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 110 degC
acpitz1 at acpi0: critical temperature is 110 degC
"NTN0530" at acpi0 not configured
"INT3F0D" at acpi0 not configured
acpibtn0 at acpi0: SLPB
"INT33A1" at acpi0 not configured
acpibtn1 at acpi0: PWRB
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: GFX0
cpu0: Enhanced SpeedStep 3392 MHz: speeds: 3101, 3100, 3000, 2700, 2500, 2400,
2200, 2000, 1800, 1600, 1400, 1200, 1100, 900, 700, 500 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel Iris Graphics 6100" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 2560x1440, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel I218-V" rev 0x03: msi, address
b8:ae:ed:77:77:b0
azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi
azalia1: codecs: Realtek/0x0283
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 3 "Intel 9 Series PCIE" rev 0xe3: msi
pci2 at ppb1 bus 2
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x59, msi
pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI 1.3
ahci0: port 3: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 3 lun 0: <ATA, Samsung SSD 850, EMT2> SCSI3 0/direct fixed
naa.5002538d404bb52d
sd0: 238475MB, 512 bytes/sector, 488397168 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x4e/2: NCT6776F rev 0x33
lm1 at wbsio0 port 0xa00/8: NCT6776F
vmm0 at mainbus0: VMX/EPT
error: [drm:pid0:intel_cpu_fifo_underrun_irq_handler] *ERROR* CPU pipe B FIFO
underrun
umass0 at uhub0 port 2 configuration 1 interface 0 "A-DATA A-DATA USB Flash
Drive" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <A-DATA, USB Flash Drive, 0.00> SCSI2 0/direct
removable serial.125f385a06713223b4ba
sd1: 7712MB, 512 bytes/sector, 15794176 sectors
uhub1 at uhub0 port 4 configuration 1 interface 0 "Genesys Logic USB2.0 Hub"
rev 2.00/32.98 addr 3
uhub2 at uhub1 port 3 configuration 1 interface 0 "Texas Instruments product
0x8142" rev 2.10/1.00 addr 4
uhidev0 at uhub2 port 4 configuration 1 interface 0 "PixArt Gaming Mouse" rev
2.00/1.00 addr 5
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub2 port 4 configuration 1 interface 1 "PixArt Gaming Mouse" rev
2.00/1.00 addr 5
uhidev1: iclass 3/0, 18 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0
ukbd0 at uhidev1 reportid 3: 8 variable keys, 1 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhid2 at uhidev1 reportid 16: input=0, output=0, feature=1
uhid3 at uhidev1 reportid 17: input=0, output=0, feature=255
uhid4 at uhidev1 reportid 18: input=0, output=0, feature=2
uhidev2 at uhub1 port 4 configuration 1 interface 0 "Corsair Corsair STRAFE
Gaming Keyboard" rev 2.00/2.04 addr 6
uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev3 at uhub1 port 4 configuration 1 interface 1 "Corsair Corsair STRAFE
Gaming Keyboard" rev 2.00/2.04 addr 6
uhidev3: iclass 3/0, 14 report ids
ukbd2 at uhidev3 reportid 1: 128 variable keys, 0 key codes
wskbd3 at ukbd2 mux 1
wskbd3: connecting to wsdisplay0
uhid5 at uhidev3 reportid 2: input=4, output=0, feature=0
uhid6 at uhidev3 reportid 3: input=63, output=0, feature=0
uhid7 at uhidev3 reportid 14: input=63, output=0, feature=0
uhidev4 at uhub1 port 4 configuration 1 interface 2 "Corsair Corsair STRAFE
Gaming Keyboard" rev 2.00/2.04 addr 6
uhidev4: no input interrupt endpoint
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (7214a743b5b0a9e8.a) swap on sd0b dump on sd0b
iwm0: hw rev 0x210, fw ver 16.242414.0, address 34:13:e8:38:fd:d3
usbdevs:
Controller /dev/usb0:
addr 1: super speed, self powered, config 1, xHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 disabled
port 2 addr 2: high speed, power 98 mA, config 1, A-DATA USB Flash
Drive(0x385a), A-DATA(0x125f), rev 1.00, iSerialNumber 2806713223b4ba
port 3 disabled
port 4 addr 3: high speed, self powered, config 1, USB2.0 Hub(0x0610), Genesys
Logic(0x05e3), rev 32.98
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 disabled
port 6 disabled
port 7 disabled
port 8 disabled
port 9 disabled
port 10 disabled
port 11 disabled
port 12 disabled
port 13 disabled
port 14 disabled
port 15 disabled
