All of my radios go out of band.that's the second mod I do after cranking
the power up

Snip out those diodes..

 

Glenn WB5TUF

 

 

From: BVARC [mailto:[email protected]] On Behalf Of K5HM via BVARC
Sent: Friday, July 17, 2015 10:03 AM
To: 'BRAZOS VALLEY AMATEUR RADIO CLUB' <[email protected]>
Cc: K5HM <[email protected]>
Subject: Re: [BVARC] 2m and maritime in the same box?

 

The short answer is no.  Although some commercial ham rigs can receive
maritime frequencies they cannot transmit outside the ham bands without
modifying the radio.  

 

73,

Ron, K5HM

 <mailto:[email protected]> [email protected]

 <http://www.qrz.com/db/k5hm> www.qrz.com/db/k5hm



        Excelsior!

 

From: BVARC [mailto:[email protected]] On Behalf Of McClure, Rob K via
BVARC
Sent: Friday, July 17, 2015 8:58 AM
To: BVARC ([email protected] <mailto:[email protected]> ) <[email protected]
<mailto:[email protected]> >
Cc: McClure, Rob K <[email protected] <mailto:[email protected]> >
Subject: [BVARC] 2m and maritime in the same box?

 

Hello all,

 

A coworker here at Cameron has expressed an interest in ham radio. I'm going
to help out as much as I can, and point him in what I think is the right
direction. 

 

He did have an interesting question. He assumed that my Yaesu FT-60 could
communicate on the maritime band. I told him know, but I thought he might be
able to monitor it them. I did a little checking and as I thought, the
Maritime VHF band is higher than the ham band, but it didn't say if it was
AM, FM, SSB or digital.

 

Which brings me to his question.  He wanted to know if anyone makes a
2m/Maritime HT or mobile rig.  I thought this might be possible since Icom
used to make a 2m/Aviation HT for a while with an option I believe for a DF
using what I think are called VOR.

 

So does anyone know if any one makes or have made (so I might find it at a
ham fest) a 2m/maritime HT or mobile size rig?

 

73 all, Rob, KC5RET

 

Rob McClure

Cameron IT Staff

Server Operations

 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
This email message is for the sole use of the intended recipient(s) and may
contain confidential and privileged information of Cameron and its Operating
Divisions. Any unauthorized use or disclosure is prohibited. If you are not
the intended recipient, please contact the sender by reply email and delete
and destroy all copies of the original message inclusive of any attachments.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

_______________________________________________
BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org

Reply via email to