Great article. I'm on Amazon and I don't see eutectic diameter .46mm. What brand sells that size? JP KG3JPP
_____ From: BVARC [mailto:[email protected]] On Behalf Of Rick Hiller via BVARC Sent: Friday, August 12, 2016 4:30 PM To: BRAZOS VALLEY AMATEUR RADIO CLUB Cc: Rick Hiller; Bill Crowell, N4HPG Subject: Re: [BVARC] When all you really want is JUST A DROP! Iron wattage, temperature, tip shape, proper method, etc. also play a big part in getting good joints. And......Practice, practice, practice!!!! Sent from my eye doo hickey On Aug 12, 2016, at 2:00 PM, Bill Crowell, N4HPG via BVARC <[email protected]> wrote: All, Hand soldering is very much an art form. I was pretty good at it, but have been learning over the years. I have learned a lot from Brian, KF4VOO as well as watching NASA training videos on YouTube and from other sources. These topics I've discussed on the air, but putting them in writing for the rest of the class <grin>. Let me give these out as a series of points: 1. Use Eutectic solder - 63/37. That's 63% tin and 37%lead. Eutectic means that both components melt/freeze at the same temperature. This is extremely important for hand-soldering. 60/40 is easier to manufacture, but gives poorer results because it was also designed for flow soldering. None of that lead-free crap. My XYL, Dasha is an environmental engineer (and a licensed Professional Engineer in the State of TEXAS). She's not worried about lead contamination from our soldering leaching into the ground water and killing kittens and puppies and that's good enough for me. 2. The flux should be rosin core. Period. 3. The diameter should be skinny. 0.46mm - the reason is that we don't want too much solder in the joint. And for today's topic: Flux. In an ideal solder joint, there should just be the proper fillet of solder where the junction is formed. Those of you who are welders understand fillets. The amount of flux inside even the best solder tends to cause the operator to apply too much solder to the joint. The internal flux dissipates before the heat-bridge gets the solder flowed. The answer - add flux to the joint. I suggest liquid flux where the rosin is dissolved in alcohol. I got some good flux from Fry's and picked up a Weller squeeze bottle with a needle in it. This dispenser SUCKS. Flux all over the work and the bench. A waste of money and time in cleaning. Liquid flux is sticky until completely dried out. The solution to the problem with the SOLUTION was to get a really good bottle+cap+dispensing needle. I found a deal on Amazon linked here: https://www.amazon.com/gp/product/B01G2QZQG8/ref=oh_aui_detailpage_o00_s00?i e=UTF8 <https://www.amazon.com/gp/product/B01G2QZQG8/ref=oh_aui_detailpage_o00_s00? ie=UTF8&psc=1> &psc=1 This kit is for "Vape" - whatever that is. It's an inexpensive kit of various bottles and dispensing needles. The needles are for syringes, but not for the pokey kind - just a blunt tip. In the bottle with yellow cap and yellow needle is the flux. It's all happy and drips out just the right amount. The black is even finer and filled with lubricating oil for my guns. I'll use the other bottles and sizes for various glues and such. <IMG_0522.jpg> Here's a link to the flux I got at Fry's, but available on Amazon: https://www.amazon.com/MG-Chemicals-8351-125ML-Halogen-Bottle/dp/B00S16UAGE/ ref=sr_1_4?s=industrial <https://www.amazon.com/MG-Chemicals-8351-125ML-Halogen-Bottle/dp/B00S16UAGE /ref=sr_1_4?s=industrial&ie=UTF8&qid=1471028240&sr=1-4&keywords=liquid+flux> &ie=UTF8&qid=1471028240&sr=1-4&keywords=liquid+flux Just a drop or 2 makes a big difference. Keeping 100 drops OFF the bench makes it funner. 73 Bill Crowell, N4HPG Pearland, TX [email protected] I prefer to live a life of galvanic isolation. _______________________________________________ BVARC mailing list [email protected] http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
_______________________________________________ BVARC mailing list [email protected] http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
