I think the fatal error is caused by the split setting not being set. The rig control error is probably caused by wrong settings or bad cable/connections. Make sure to check the data and stop bits on the radio, in the device manager on the computer, and in WSJT. Hope you can get it going soon -Alex 73
On Wed, Jan 15, 2020 at 4:06 PM gmuller885 via BVARC <[email protected]> wrote: > In set up set the setin to. "fake it." > > > > Sent via the Samsung Galaxy S8+, an AT&T 5G Evolution capable smartphone > > > -------- Original message -------- > From: Martin Blaise via BVARC <[email protected]> > Date: 1/15/20 2:42 PM (GMT-06:00) > To: [email protected], BRAZOS VALLEY AMATEUR RADIO CLUB < > [email protected]> > Cc: Martin Blaise <[email protected]> > Subject: [BVARC] wsjt errors > > See the graphic. This is what happens when I try to run wsjt-x now. I > think the cat cable is working however. > ________________________________________________ > Brazos Valley Amateur Radio Club > Get on the air - 146.94 Repeater > Volunteer now for the Houston Hamfest > > BVARC mailing list > [email protected] > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >
________________________________________________ Brazos Valley Amateur Radio Club Get on the air - 146.94 Repeater Volunteer now for the Houston Hamfest BVARC mailing list [email protected] http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
