Glad to hear it is working. 73
-Alex

On Wed, Jan 15, 2020, 5:37 PM Martin Blaise <[email protected]> wrote:

> I changed some settings and I think I have it working. But hey I am not as
> smart as a genius from Princeton.
>
> On Wed, Jan 15, 2020 at 5:08 PM Alexander Park via BVARC <[email protected]>
> wrote:
>
>> I think the fatal error is caused by the split setting not being set. The
>> rig control error is probably caused by wrong settings or bad
>> cable/connections. Make sure to check the data and stop bits on the radio,
>> in the device manager on the computer, and in WSJT.
>> Hope you can get it going soon
>> -Alex 73
>>
>> On Wed, Jan 15, 2020 at 4:06 PM gmuller885 via BVARC <[email protected]>
>> wrote:
>>
>>> In set up set the setin to. "fake it."
>>>
>>>
>>>
>>> Sent via the Samsung Galaxy S8+, an AT&T 5G Evolution capable smartphone
>>>
>>>
>>> -------- Original message --------
>>> From: Martin Blaise via BVARC <[email protected]>
>>> Date: 1/15/20 2:42 PM (GMT-06:00)
>>> To: [email protected], BRAZOS VALLEY AMATEUR RADIO CLUB <
>>> [email protected]>
>>> Cc: Martin Blaise <[email protected]>
>>> Subject: [BVARC] wsjt errors
>>>
>>> See the graphic. This is what happens when I try to run wsjt-x now. I
>>> think the cat cable is working however.
>>> ________________________________________________
>>> Brazos Valley Amateur Radio Club
>>> Get on the air - 146.94 Repeater
>>> Volunteer now for the Houston Hamfest
>>>
>>> BVARC mailing list
>>> [email protected]
>>> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
>>>
>> ________________________________________________
>> Brazos Valley Amateur Radio Club
>> Get on the air - 146.94 Repeater
>> Volunteer now for the Houston Hamfest
>>
>> BVARC mailing list
>> [email protected]
>> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
>>
>
________________________________________________
Brazos Valley Amateur Radio Club
Get on the air - 146.94 Repeater
Volunteer now for the Houston Hamfest

BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org

Reply via email to