I changed some settings and I think I have it working. But hey I am not as smart as a genius from Princeton.
On Wed, Jan 15, 2020 at 5:08 PM Alexander Park via BVARC <[email protected]> wrote: > I think the fatal error is caused by the split setting not being set. The > rig control error is probably caused by wrong settings or bad > cable/connections. Make sure to check the data and stop bits on the radio, > in the device manager on the computer, and in WSJT. > Hope you can get it going soon > -Alex 73 > > On Wed, Jan 15, 2020 at 4:06 PM gmuller885 via BVARC <[email protected]> > wrote: > >> In set up set the setin to. "fake it." >> >> >> >> Sent via the Samsung Galaxy S8+, an AT&T 5G Evolution capable smartphone >> >> >> -------- Original message -------- >> From: Martin Blaise via BVARC <[email protected]> >> Date: 1/15/20 2:42 PM (GMT-06:00) >> To: [email protected], BRAZOS VALLEY AMATEUR RADIO CLUB < >> [email protected]> >> Cc: Martin Blaise <[email protected]> >> Subject: [BVARC] wsjt errors >> >> See the graphic. This is what happens when I try to run wsjt-x now. I >> think the cat cable is working however. >> ________________________________________________ >> Brazos Valley Amateur Radio Club >> Get on the air - 146.94 Repeater >> Volunteer now for the Houston Hamfest >> >> BVARC mailing list >> [email protected] >> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >> > ________________________________________________ > Brazos Valley Amateur Radio Club > Get on the air - 146.94 Repeater > Volunteer now for the Houston Hamfest > > BVARC mailing list > [email protected] > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >
________________________________________________ Brazos Valley Amateur Radio Club Get on the air - 146.94 Repeater Volunteer now for the Houston Hamfest BVARC mailing list [email protected] http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
