Thanks for the input, David & Ron! Karl
On Tue, Mar 16, 2021 at 6:38 AM Ron Bosch via BVARC <[email protected]> wrote: > I run one 3 foot USB A to B cable to my IC-7100 for both rig control and > digital modes. I run HRD for rig control, and the associated DM760 for HF > Digi, and WSJT-X for the weak signal digi. I am in the process of setting > up a PTC IIIusb modem, which will run a second USB to Accessory cable (I > hope that and the Airmail program is all I need to get on the DTN backbone). > > Ron > KE4DRF > > On Tue, Mar 16, 2021 at 12:25 AM Karl Bernard via BVARC <[email protected]> > wrote: > >> What USB cables are you using for rig control? I plan to work digital >> modes and do rig control on my IC-7100 and possibly keep the power-supply >> and the radio itself away from my desk and I was planning to get a 6-10ft >> USB A to USB mini-B cable. I'd think it should be a shielded cable. I >> should also get a shielded micro-USB cable for my web-cam - it goes offline >> every time I key my 2M rig, lol (indoor antenna...). >> >> Thanks, >> >> Karl >> ________________________________________________ >> Brazos Valley Amateur Radio Club >> >> BVARC mailing list >> [email protected] >> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >> Publicly available archives are available here: >> https://www.mail-archive.com/[email protected]/ >> > ________________________________________________ > Brazos Valley Amateur Radio Club > > BVARC mailing list > [email protected] > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Publicly available archives are available here: > https://www.mail-archive.com/[email protected]/ >
________________________________________________ Brazos Valley Amateur Radio Club BVARC mailing list [email protected] http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Publicly available archives are available here: https://www.mail-archive.com/[email protected]/
