Jerry, There is a fellow in San Antonio that has done a great job for me in the past. On Icom radios but he does Yaesu too.
HamRepair.com in San Antonio, TX has a web site too. You can get onto e-ham.net and go to the Product Review section. First item listed is Amateur Radio Equipment Repair. Plenty of options on that page...local or national. Send them an e-mail and describe what you have. Most will give you their hourly rate and shipping details, etc. and look up. As far as repairing our own equipment is concerned. I am electronics oriented and love to fix crap. However you can only go so far into a current gen radio before you run into problems. Once radios started using VLSIC's, Proms and ASIC's...it got harder to get to the root of certain problems. Then they moved to Gate Arrays, FPGA's, etc. Repair at some stages required a test bench jig. The jig cost bucks but made it easier for the tech to fix things. Oh, then the move from thru hole to SMD's just intensified the visual issue with smaller and smaller parts. Sneeze and there goes your LC filter components HI HI. At this point, I am not saying you can't fix it, and most problems deal with the interface signals and immediate circuits that connect the outside world to the inside micro, mirco electronics. So cold solder joints, bad relays, blown SWR meter diodes or power x-istors, etc. are the majority. Once it gets to the board level guts, most shops toss and replace. Also, you better have a deep background in practical contemporary electronics. Because, understanding the block diagram and theory of operation, then applying that to the schematic, which can take up quite a few pages in the maintenance manual these days, is an exercise in 'looking glass' use and having a copy of the very latest edition of Horowitz and Hills's The Art of Electronics by your side. Best of luck, Jerry. Let me know if I can be of further confusion or assistance. 73...Rick -- W5RH My contact info is in the BVARC roster. . On Thu, Oct 21, 2021 at 1:00 PM Robert Polinski via BVARC <[email protected]> wrote: > Make it clear, I am not putting down programmers or anyone. I agree, I am > trying to point out not all of us have the skill level to do repairs. That > was my answer to the person that said hams should repair their own > equipment. I can repair your computer, but god knows you do NOT want me to > program it!! Robert > > > > *From:* BVARC <[email protected]> *On Behalf Of *Ameenah007 via > BVARC > *Sent:* Thursday, October 21, 2021 12:45 PM > *To:* BRAZOS VALLEY AMATEUR RADIO CLUB <[email protected]> > *Cc:* Ameenah007 <[email protected]>; [email protected]; Robert > Polinski <[email protected]> > *Subject:* Re: [BVARC] Radio Repair > > > > Why would I do a repair if I can pay someone else to? Hopefully others > will utilize my expertise for their needs even if they can do the work for > themselves. I see this no different than yard work or oil changes. > > > > 73's > > Ameenah > > AG5VZ, WRMY872 > > > > On Thu, Oct 21, 2021 at 12:29 PM Robert Polinski via BVARC < > [email protected]> wrote: > > In the old days, most hams had the skill & tools to make most repairs. > Over the last 20 or so years, technology has changed. To repair most modern > equipment, you need expensive desoldering tools, soldering equipment, air > soldering units, etc, just to remove the part for testing or replacement. > Most of this equipment is out of reach for most hams. I am in the > electronics repair business and with replacements so cheap, it is hard to > recoup the cost I have invested in repair equipment. Also the skill that is > needed to use it, most hams would not do enough repairs to gain that skill. > Now you also have to have the test equipment, signal generators, scopes, > frequency counters, etc. Hard to justify for a hobby investment. If you a > new ham and invest in old, tube type equipment, there are dangerous & > deadly high voltages in older equipment. I grew up working with this type > of gear, but most current hams & many current electronic repair people have > not. This requires a much greater respect when servicing this equipment. > Long time hams, over their years have accumulated much of this gear and > skills to do repairs. Over the last 20-30 years, schools have remove > classroom training in this skills, electronics, metal shop. wood shop, etc. > favoring the arts, and computer programming. There are people that will > read this that can write a program for a Arduino or Raspberry PI but could > not assemble a power supply for one. Robert > > > > *From:* BVARC <[email protected]> *On Behalf Of *David Hold via > BVARC > *Sent:* Thursday, October 21, 2021 9:02 AM > *To:* BRAZOS VALLEY AMATEUR RADIO CLUB <[email protected]> > *Cc:* David Hold <[email protected]> > *Subject:* Re: [BVARC] Radio Repair > > > > I wish hams would learn to fix their own stuff like the ham radio of old… > that is why they include electronics on the test….. maybe they should > remove those questions and replace them with where do I mail my radio for > repair > > > > On Thu, Oct 21, 2021 at 8:58 AM Jerry LaVoie via BVARC <[email protected]> > wrote: > > Good morning all, > > > > I need your help. Being new to the area I have no idea where to look. I > have an old Yaesu FT-757GXII. It needs to beto be realigned and the > internal battery needs replacement. Does anyone have any suggestions on > where to have this service done? I appreciate your responses and help. > > > > Thank You > > > > Jerry > > WX7MRI > > ________________________________________________ > Brazos Valley Amateur Radio Club > > BVARC mailing list > [email protected] > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Publicly available archives are available here: > https://www.mail-archive.com/[email protected]/ > > -- > > David Hold [email protected] > > ________________________________________________ > Brazos Valley Amateur Radio Club > > BVARC mailing list > [email protected] > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Publicly available archives are available here: > https://www.mail-archive.com/[email protected]/ > > ________________________________________________ > Brazos Valley Amateur Radio Club > > BVARC mailing list > [email protected] > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Publicly available archives are available here: > https://www.mail-archive.com/[email protected]/ > -- Rick Hiller *e-mail: [email protected] <[email protected]>* *Cell: 832-474-3713* *Physical: 9031 Troulon Drive* * Houston, TX 77036*
________________________________________________ Brazos Valley Amateur Radio Club BVARC mailing list [email protected] http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Publicly available archives are available here: https://www.mail-archive.com/[email protected]/
