Hi Karen: My box is 101b?osol-11?. I download new packages with my owner pkgrecv script from http://pkg.opensolaris.org to my local box. The number of packages is 1051, although there is nothing except manifest in some packages for example amp . I check all the packages files with another script to verify if all files of every package download complete.
I start a empty IPS .Then I publish all packages with my owner pkgsend script to the IPS. Before I try the DC.I can do the IPS command listed in the "trouble shooting" section of the following page successfully outside of the Distro Constructor env. http://opensolaris.org/os/project/caiman/Constructor/DC_docs/DC_toi.html pkg image-create -F -a test=http://10.152.11.188:8080 /tmp/test_img pkg -R /tmp/test_img install SUNWcsd pkg -R /tmp/test_ima install SUNWcs pkg -R /tmp/test_img install slim_install They are successfull. I think my IPS is OK. Then I use DC application ,in the slim_cd.xml I point the url to my local IPS. About 1.5 hours later , My ISO is created and I try to install with vmware. almost everything is ok until process of installation is up tp 99% . install_log is : <OM Dec 3 10:29:10 > Timezone setting will be TZ=UTC <OM Dec 3 10:29:10 > Set timezone <TDDM_E Dec 3 10:29:10 > ddm_drive_get_name(): Can't get alias name, err=9 <OM Dec 3 10:29:11 > System reports enough physical memory for installation, swap is optional <OM Dec 3 10:29:25 > No disk partitions defined prior to install <OM Dec 3 02:29:39 > Timezone setting will be TZ=PRC <OM Dec 3 02:29:39 > Set timezone <OM Jan 1 00:00:01 > Disk was changed <OM Jan 1 00:00:01 > Disk contains valid Solaris partition <OM Jan 1 00:00:01 > whole_disk = 1 <OM Jan 1 00:00:01 > diskname set = c0d0 <OM Jan 1 00:00:01 > Set fdisk attrs <OM Jan 1 00:00:01 > Set zfs root pool device <OM Jan 1 00:00:01 > creating zpool <OM Jan 1 00:00:00 > /usr/sbin/zfs get -Hp -o value available rpool <OM Jan 1 00:00:00 > Creating swap and dump on ZFS volumes <OM Jan 1 00:00:02 > TI process completed successfully <OM Jan 1 00:00:02 > Transfer process initiated <TRANSFER_MOD Jan 1 00:00:00 > -- Starting transfer process, Thu, 01 Jan 1970 08:00:00 +0000 -- <TRANSFER_MOD Jan 1 00:00:00 > Building cpio file lists <TRANSFER_MOD Jan 1 00:00:00 > Scanning //. <TRANSFER_MOD Jan 1 00:00:02 > Scanning //usr <TRANSFER_MOD Jan 1 00:00:01 > Scanning //opt <TRANSFER_MOD Jan 1 00:00:01 > Scanning //dev <TRANSFER_MOD Jan 1 00:00:02 > Scanning /mnt/misc/. <TRANSFER_MOD Jan 1 00:00:00 > Scanning /mnt/pkg/. <TRANSFER_MOD Jan 1 00:00:01 > Scanning /.cdrom/. <TRANSFER_MOD Jan 1 00:00:01 > Beginning cpio actions <TRANSFER_MOD Jan 1 00:00:02 > -- Completed transfer process, Thu, 01 Jan 1970 08:00:01 +0000 -- <ICT Jan 1 00:00:02 > current task: ict_set_lang_locale <ICT Jan 1 00:00:00 > ict_set_lang_locale Succeeded <ICT Jan 1 00:00:00 > current task: ict_configure_user_directory <ICT Jan 1 00:00:00 > ict_configure_user_directory Succeeded <OM Jan 1 00:00:00 > Setting up swap mount in /a/etc/vfstab <ICT Jan 1 00:00:00 > current task: ict_set_host_node_name <ICT Jan 1 00:00:00 > ict_set_host_node_name Succeeded <ICT Jan 1 00:00:00 > current task: ict_set_user_profile <ICT Jan 1 00:00:00 > ict_set_user_profile Issuing Command: /bin/cp /etc/skel/.profile /a/export/home/jkl/.profile <ICT Jan 1 00:00:01 > ict_set_user_profile Issuing Command: /bin/cp /etc/skel/.bashrc /a/export/home/jkl/.bashrc <ICT Jan 1 00:00:01 > ict_set_user_profile Succeeded <OM Jan 1 00:00:01 > /usr/sbin/zpool set bootfs=rpool/ROOT/opensolaris rpool <ICT Jan 1 00:00:01 > current task: ict_installgrub <ICT Jan 1 00:00:01 > ict_installgrub Succeeded <ICT Jan 1 00:00:01 > current task: ict_set_user_role <ICT Jan 1 00:00:01 > ict_set_user_role Succeeded <OM Jan 1 00:00:01 > Running install-finish script <OM Jan 1 00:00:01 > /sbin/install-finish -B '/a' -R '$5$fZNUYUhx$2rdfXiRLZXIOBib53ORZs7WSXmD6QASg8nwiyPE3Rk.' -n 'jkl' -l 'jkl' -p '$5$jQW7eWwD$ShZenf8aeuk6ZU.V6lFGe2l67WDh/wHbMTvOuDDH23B' -G '10' -U '101' <ICT Jan 1 00:00:01 > Starting Python script of Install Completion Tasks <ICT Jan 1 00:00:01 > BASEDIR: /a <ICT Jan 1 00:00:01 > USER_SPEC_DBGLVL: <ICT Jan 1 00:00:01 > ROOT_PW: $5$fZNUYUhx$2rdfXiRLZXIOBib53ORZs7WSXmD6QASg8nwiyPE3Rk. <ICT Jan 1 00:00:01 > NU_GOS: jkl <ICT Jan 1 00:00:01 > NU_LOGIN: jkl <ICT Jan 1 00:00:01 > NU_PW: $5$jQW7eWwD$ShZenf8aeuk6ZU.V6lFGe2l67WDh/wHbMTvOuDDH23B <ICT Jan 1 00:00:01 > NU_GID: 10 <ICT Jan 1 00:00:01 > NU_UID: 101 <ICT Jan 1 00:00:01 > current task:create_smf_repository <ICT Jan 1 00:00:02 > current task:create_mnttab <ICT Jan 1 00:00:02 > current task:cleanup_unneeded_files_and_directories <ICT Jan 1 00:00:02 > current task:keyboard_layout <ICT Jan 1 00:00:02 > Detected US-English keyboard layout <ICT Jan 1 00:00:02 > current task:delete_misc_trees <ICT Jan 1 00:00:02 > current task:set_prop_from_eeprom <ICT Jan 1 00:00:02 > current task:set_console_boot_device_property <ICT Jan 1 00:00:02 > Setting console boot device property to text <ICT Jan 1 00:00:02 > current task:add_splash_image_to_grub_menu <ICT Jan 1 00:00:02 > current task:fix_browser_home_page <ICT Jan 1 00:00:02 > current task:remove_liveCD_coreadm_conf <ICT Jan 1 00:00:02 > current task:set_Solaris_partition_active <ICT Jan 1 00:00:02 > current task:get_rootdev_list <ICT Jan 1 00:00:02 > current task:set_boot_active <ICT Jan 1 00:00:02 > current task:bootadm_update_menu <ICT Jan 1 00:00:02 > update GRUB boot menu on device /dev/rdsk/c0d0s0 <ICT Jan 1 00:00:01 > current task:remove_bootpath <ICT Jan 1 00:00:01 > current task:fix_grub_entry <ICT Jan 1 00:00:01 > current task:add_other_OS_to_grub_menu <ICT Jan 1 00:00:01 > current task:update_dumpadm_nodename <ICT Jan 1 00:00:02 > current task:explicit_bootfs <ICT Jan 1 00:00:02 > current task:_get_root_dataset <ICT Jan 1 00:00:01 > current task:enable_happy_face_boot <ICT Jan 1 00:00:01 > current task:update_boot_archive <ICT Jan 1 00:00:00 > bootadm update-archive output: Creating boot_archive for /a <ICT Jan 1 00:00:00 > bootadm update-archive output: updating /a/platform/i86pc/boot_archive <ICT Jan 1 00:00:00 > bootadm update-archive output: updating /a/platform/i86pc/amd64/boot_archive <ICT Jan 1 00:00:00 > current task:remove_files <ICT Jan 1 00:00:00 > current task:copy_splash_xpm <ICT Jan 1 00:00:00 > current task:smf_correct_sys_profile <ICT Jan 1 00:00:00 > current task:add_sysidtool_sys_unconfig_entries <ICT Jan 1 00:00:00 > current task:enable_nwam <ICT Jan 1 00:00:02 > current task:remove_install_specific_packages <ICT Jan 1 00:00:02 > current task:set_flush_content_cache_on_success_false <ICT Jan 1 00:00:02 > current task:set_root_password <ICT Jan 1 00:00:02 > current task:create_new_user <ICT Jan 1 00:00:02 > current task:reset_image_UUID <ICT_E Jan 1 00:00:01 > Reset uuid failed - exit status = 256, command was pkg -R /a set-authority --reset-uuid --no-refresh opensolaris.org <ICT_E Jan 1 00:00:01 > Failure. Returning: ICT_PKG_RESET_UUID_FAILED <ICT Jan 1 00:00:01 > Post-transfer Python Install Completion Tasks finished. <ICT Jan 1 00:00:01 > 1 out of 29 total Python ICTs finished with errors <ICT Jan 1 00:00:01 > The last error reported is: 238 <OM Jan 1 00:00:01 > The install-finish script reported failures. <OM Jan 1 00:00:01 > The install finish script reported failures <ICT Jan 1 00:00:01 > current task: ict_snapshot <ICT Jan 1 00:00:02 > ict_snapshot Succeeded <OM Jan 1 00:00:02 > Marking root pool as 'ready' <OM Jan 1 00:00:02 > Unmounting BE <OM Jan 1 00:00:02 > /usr/sbin/zfs unmount rpool/export/home/jkl <OM Jan 1 00:00:02 > /usr/sbin/zfs set mountpoint=/export/home/jkl rpool/export/home/jkl <OM Jan 1 00:00:02 > /usr/sbin/zfs unmount rpool/export/home <OM Jan 1 00:00:02 > /usr/sbin/zfs set mountpoint=/export/home rpool/export/home <OM Jan 1 00:00:03 > /usr/sbin/zfs unmount rpool/export <OM Jan 1 00:00:00 > /usr/sbin/zfs set mountpoint=/export rpool/export <ICT Jan 1 00:00:00 > current task: ict_transfer_logs <ICT Jan 1 00:00:00 > ict_transfer_logs Succeeded that's tha all context of the install_log. Then installation failed. I don't know why how. 1.So What should I do? 2.How can I remove package for example firefox and openofice. I use the default slim_cd.xml. 3.if is it a bug that system time is always Jan/1/1970 started in the vmware workstation ? ------------------ jklyekai 2008-12-03 ------------------------------------------------------------- ????Karen Tung ?????2008-11-20 06:29:37 ????jklyekai ???caiman-discuss at opensolaris.org ???Re: [caiman-discuss] Timeout error:main url set to another IPS intheslim_cd.xml jklyekai wrote: > Karen, > Thank your reply . > I have 99b and 101a system. I download all file from pkg.opensolaris.org and > set a local IPS in 101a vmware box. I also can review What do you mean you download all the file from pkg.opensolaris.org? How do you setup your local IPS repo? > it with IE or firefox. But when I click the Catalog ' info' It shows a "the > server encountered an unexpected condition which prevented it from fulfilling the requestPowered by CherryPy 3.1" . click Catalog ' manifest' is OK. > The fact that you can't do this means your repo is not setup correctly, or your system is not setup correctly. You should investigate and correct the problems before using Distro Constructor. > I try another IPS http://pkg.unix-center.net:80 which is a mirror of the > pkg.opensolaris.org in china . Click info and manifest both are ok. > > I set "pkg set-authority "both unix-center and my local IPS to authority. > But when I start packagemanager in the 101a,I select the unix-center or local authroity in repository dialog in the right corner , I can't find any packages in the list belove of the GUI packagemaniger. > > I only replace the main url to one of IPS above mention in the slim_cd.xml , > then,error show: > pkg:maxmum (4) pkg maximum network retries failed exceed download ... > Read Error on tar stream... > Ubable to install SUNWcs into /rpool/dc/date_build/pkg_image > Ubable to install slim_install into /rpool/dc/date_build/pkg_image > Ubable to install SUNWslim-utils into /rpool/dc/date_build/pkg_image > Unable to retrieve all of the specified packages > > then I set PKG_CLIENT_TIMEOUT = 30000 > PKG_TIMEOUT_MAX=10000 > Both unix-center and my local IPS are the same error. > I think all your problems have nothing to do with the Distro Constructor. You should resolve all of them before you try DC again. Please verify that you can do the IPS command listed in the "trouble shooting" section of the following page successfully outside of the Distro Constructor env. before you try the DC. Otherwise, you are just adding more complications. http://opensolaris.org/os/project/caiman/Constructor/DC_docs/DC_toi.html Thanks, --Karen > ------------------ > jklyekai > 2008-11-19 > > ------------------------------------------------------------- > ????Karen Tung > ?????2008-11-19 01:45:01 > ????likaijun > ???caiman-discuss at opensolaris.org > ???Re: [caiman-discuss] Timeout error:main url set to another IPS inthe > slim_cd.xml > > likaijun wrote: > > > I use distro-const build slim_cd.xml then error show like this: > > > > pkg: Maximum [b](4) [/b]network retries exceeded during download. Details > > follow: > > transfer from ' http://pkg.unix-center.net ' failed : Read error on tar > > stream (happen 1000 times). > > > > I set pkg_client_timeout and pkg_time_max. but still failed. > > I found "Read error on tar stream" in the ./client/filelist.py and > > "Maximum network retries ...." in the /usr/bin/pkg > > > > > Do you know for sure that http://pkg.unix-center.net has a working repo > when you tried? > I tried connecting to it using a web browser, I am not able to connect. > > > 1. the distro-const does't suport I set the url paraments > > > > > The distro constructor supports setting of alternate authorites. > > > 2.my box is 99b with vmware. > > > > > I suggest try the latest version of 2008.11, release candidate 1b. The > Distro constructor has changed > a lot since build 99. You can download it from: http://www.genunix.org/ > > --Karen > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mail.opensolaris.org/pipermail/caiman-discuss/attachments/20081203/21002eec/attachment.html>
