This is a PTP, not PMP? So same HW as the 900 MHz SM? I don't think that will run on 48V, I think the max is 30. Although I have not used the PTP version and could be mistaken.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Nick Bright Sent: Tuesday, January 10, 2017 3:08 PM To: [email protected] Subject: [Cambium-users] SyncInjector with PTP450i Greetings, I opened a ticket with PacketFlux but haven't received a response yet. We had to leave the site in failure, unfortunately. At a customer location (contracting work for them, not my network) we were installing a 2nd PTP450i 900Mhz unit for the clients' building to building connections, and eventually there will be a third unit. To sync the network, we purchased a PacketFlux SyncInjector 10/100 (without sync pipe), using a 48v power supply purchased from PacketFlux. The PTP450i units use 802.3at power, but do also work on Cambium POE (+30v 7/8, -4/5). When connecting the PTP450i to the SyncInjector, the SyncInjector flashes light codes that indicate "short or overload". I attempted to adjust the 4/5,7/8 to +/-,+/- matching the '450 documentation, but the same short/overload error was reported. Basically, every configuration results in "short or overload" error reported. Thoughts on this? -- ----------------------------------------------- - Nick Bright - - Vice President of Technology - - Valnet -=- We Connect You -=- - - Tel 888-332-1616 x 315 / Fax 620-331-0789 - - Web http://www.valnet.net/ - ----------------------------------------------- - Are your files safe? - - Valnet Vault - Secure Cloud Backup - - More information & 30 day free trial at - - http://www.valnet.net/services/valnet-vault - ----------------------------------------------- This email message and any attachments are intended solely for the use of the addressees hereof. This message and any attachments may contain information that is confidential, privileged and exempt from disclosure under applicable law. If you are not the intended recipient of this message, you are prohibited from reading, disclosing, reproducing, distributing, disseminating or otherwise using this transmission. If you have received this message in error, please promptly notify the sender by reply E-mail and immediately delete this message from your system. _______________________________________________ Cambium-users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/cambium-users _______________________________________________ Cambium-users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/cambium-users
